fix(migration): 실패한 DROP INDEX CONCURRENTLY를 runbook 절차로 복구되게 한다
문제 (재리뷰 round8 RR8-03-01) - migration-failed.md "Recover a failed concurrent index migration"은 CREATE·DROP·REINDEX 동시 문장 셋을 대상으로 두고, 2단계에서 "빌드가 남긴 무효 인덱스를 지운다"고 한다. 실패한 DROP INDEX CONCURRENTLY가 남긴 무효 인덱스는 그 마이그레이션이 지우려던 인덱스다. 절차대로 지우고 실패 행을 지운 뒤 다시 배포하면 같은 문장이 42704(index does not exist)로 실패하고 실패 행이 다시 생긴다. 운영자는 처음과 같은 막힌 상태로 돌아간다. - 고치다 같은 절에서 하나 더 찾았다. 2단계(DROP INDEX CONCURRENTLY)가 3단계(원인 정리) 앞이다. 취소·timeout이 원인이면 그 열린 트랜잭션이 운영자의 DROP INDEX CONCURRENTLY도 붙잡아, 2단계가 3단계를 기다린다. - runbook을 실행하는 IT는 중복으로 실패한 unique CREATE 한 경우만 돌렸다. 고른 방법 - 리뷰 권장안: 무효 인덱스를 지우는 단계를 문장 종류로 나눈다. CREATE는 그 인덱스를, REINDEX는 _ccnew(또는 _ccold) 사본을 지운다. DROP INDEX CONCURRENTLY면 이 단계를 건너뛴다. 다시 배포한 같은 문장이 그 인덱스를 지운다(PostgreSQL은 중간에 실패한 DROP INDEX CONCURRENTLY의 재시도를 받는다). 5단계 문장도 "builds the index"에서 세 경우로 고친다. - 단계 순서를 "빌드 확인 → 원인 정리 → 무효 인덱스 삭제 → 실패 행 삭제 → 재배포"로 바꾼다. 실패 행만 지운다는 소유자 결정(2026-11-06)은 그대로다. - IT에 두 경우를 더한다. 열린 쓰기를 기다리다 취소된 REINDEX와 열린 읽기를 기다리다 취소된 DROP에 runbook SQL을 runbook에서 읽어 돌리고, 재배포 뒤 이력 [1 true, 2 true], 무효 인덱스 없음, V1 checksum 그대로를 단언한다. 대기를 30초 기다리지 않고, 문장이 잠금을 기다리는 것을 본 즉시 취소하는 도우미(cancelledOnceItWaits)를 둔다. - 같은 절차를 요약한 곳을 같이 고친다: docs/jpa/runbooks.md "An invalid index exists", migration-guide "Concurrent index builds"(DROP이 무엇을 기다리는지 포함), 학습 문서 8.2절, ConcurrentIndexMigrationInspector의 Javadoc과 실패 메시지, 업그레이드 안내 5절 행(그 범위가 아직 main에 없어 행을 최종 동작으로 고치고 머리 목록에 더함). - 버린 대안: 가이드와 검사기가 DROP INDEX CONCURRENTLY에 IF EXISTS를 요구한다. 이미 배포된 파일은 고칠 수 없어 새 파일에만 통하고, 서비스의 기존 마이그레이션 검사를 새로 실패시킨다. 위험·한계 - 운영자가 실패한 문장의 종류를 마이그레이션 파일에서 읽어야 한다. runbook이 이력 행만으로는 알 수 없는 것을 요구한다. - REINDEX가 swap 뒤에 실패해 _ccold가 남는 경우는 문서로만 다뤘다(실행 재현 없음). PostgreSQL 문서의 권장 복구와 같다. - 단계 번호가 바뀌었다. 리뷰 기록이 옛 번호(2단계 = drop)로 적은 곳은 그때의 기록이라 두었다. RED (desktop, 기준3eb3b067+ 임시 테스트, 로그 ~/r9-g3-logs/red-concurrent.log) - postgresqlConcurrentIndexMigrationIntegrationTest rc=1, 9건 중 2건 실패 - redAFailedConcurrentDropIsRecoveredByTheBaseRunbook: 기준 runbook 1·2·4단계 뒤 재배포가 "42704 ERROR: index "ix_probe_id" does not exist"로 실패, 이력 [1 true, 2 false] 그대로 - redTheBaseRunbookDropsBeforeItEndsTheTransaction: 기준 순서의 2단계 (_ccnew drop)가 열린 쓰기 트랜잭션을 기다려 취소됨 - 나머지 7건(기존) 통과 검증 (desktop, 이 커밋의 트리7cfaa83c, --no-build-cache, 로그 ~/r9-g3-logs/) - :adapter:outbound:persistence-jpa:check rc=0, test 666건 실패·skip 0 - postgresqlConcurrentIndexMigrationIntegrationTest rc=0, 9건(새 2건 포함) - :adapter:outbound:persistence-jpa:testQualityCheck rc=0 - :app-bootstrap:documentContractTest rc=0, 67건(RunbookCoverageContractTest 포함) - -p optional-platforms :grpc:grpc-operation-ledger-jpa:integrationTest rc=0, 47건(검사기 사본이 바뀌어서) - FROM-CACHE 0 - 상대 링크(노트북): python3 scripts/check-work-docs.py --links로 바꾼 문서 5개(migration-failed.md, jpa/runbooks.md, migration-guide.md, 학습 문서, 업그레이드 안내) rc=0, 깨진 링크 0 Refs: docs/reviews/2026-11-03-rereview/round8/03-migration.md RR8-03-01 Fixes:6ec0c4f7fa("fix(migration): 실패한 동시 인덱스 마이그레이션 복구와 검사기 설명을 실제 동작에 맞춘다")
This commit is contained in:
@@ -152,12 +152,14 @@ transaction Flyway itself keeps open, and Flyway waits for the build in turn: th
|
||||
and the table's other DDL and autovacuum queue behind the build meanwhile. The template's Flyway
|
||||
holds its lock for the session instead ("Who may change the schema"), so the build waits only for
|
||||
other transactions; a deployment tool left on Flyway's default stops on the first such migration.
|
||||
`DROP INDEX CONCURRENTLY` does not wait that way. `PostgreSqlConcurrentIndexMigrationIntegrationTest`
|
||||
`DROP INDEX CONCURRENTLY` does not wait that way: it waits only for the transactions that hold a
|
||||
lock on its table. `PostgreSqlConcurrentIndexMigrationIntegrationTest`
|
||||
(`postgresqlConcurrentIndexMigrationIntegrationTest`) applies both builds as a second deploy, with
|
||||
the Flyway Spring Boot builds from the module defaults and with `FlywaySchemaPolicy.configure()`,
|
||||
on real PostgreSQL. The other transactions still count: a long one an operator or a report keeps
|
||||
open holds the build, and a file run outside a transaction cannot bound that wait with `SET LOCAL`.
|
||||
Look for old transactions (`pg_stat_activity.xact_start`) before deploying one.
|
||||
open holds the build, and the drop too once it has touched the table, and a file run outside a
|
||||
transaction cannot bound that wait with `SET LOCAL`. Look for old transactions
|
||||
(`pg_stat_activity.xact_start`) before deploying one.
|
||||
|
||||
The testkit's `ConcurrentIndexMigrationInspector` checks a script for this in a migration test
|
||||
(nothing checks it at startup), and additionally requires the migration to contain nothing else.
|
||||
@@ -165,15 +167,18 @@ Next to another statement, a concurrent one makes Flyway refuse the file before
|
||||
nothing configures it; with `executeInTransaction=false` Flyway commits each statement on its own,
|
||||
and a failed build leaves the statements before it applied — state to reconstruct by hand.
|
||||
|
||||
Alone, a failed build leaves an invalid index and a history row with `success = false` for its
|
||||
Alone, a failed statement leaves an invalid index and a history row with `success = false` for its
|
||||
version, and Flyway refuses every later deploy ("Detected failed migration to version …") until that
|
||||
row is gone: dropping the index is not enough. The recovery is
|
||||
[migration-failed.md](../runbooks/migration-failed.md) "Recover a failed concurrent index migration":
|
||||
confirm no build is running, drop the invalid index, remove the cause, delete that version's failed
|
||||
row and nothing else, deploy again. It is not `flyway repair`, which would also rewrite the
|
||||
remaining rows' checksums. `PostgreSqlConcurrentIndexMigrationIntegrationTest`
|
||||
confirm no build is running, remove the cause, drop the invalid index a failed build or rebuild
|
||||
left, delete that version's failed row and nothing else, deploy again. A failed `DROP INDEX
|
||||
CONCURRENTLY` leaves invalid the index it was dropping; the runbook leaves that one for the deploy
|
||||
again to drop, since dropped by hand it makes the same statement fail. It is not `flyway repair`,
|
||||
which would also rewrite the remaining rows' checksums. `PostgreSqlConcurrentIndexMigrationIntegrationTest`
|
||||
(`postgresqlConcurrentIndexMigrationIntegrationTest`) runs the runbook's SQL, read from the runbook,
|
||||
after a unique build that failed on a duplicate, and shows both mixed files above.
|
||||
after a unique build that failed on a duplicate and after a rebuild and a drop cancelled while they
|
||||
waited for an open transaction, and shows both mixed files above.
|
||||
|
||||
An invalid index is not merely useless — the planner ignores it while every write still maintains
|
||||
it. [runbooks.md](runbooks.md) has the query that finds them. Nothing drops them automatically: an
|
||||
|
||||
+11
-7
@@ -69,15 +69,19 @@ join pg_namespace n on n.oid = i.relnamespace
|
||||
where not x.indisvalid;
|
||||
```
|
||||
|
||||
A concurrent build failed. The index is ignored by the planner and maintained by every write.
|
||||
A concurrent build, rebuild or drop failed. The index is ignored by the planner and maintained by
|
||||
every write.
|
||||
|
||||
1. Confirm no build is currently running. An in-progress build looks identical in the catalog.
|
||||
2. Run `DROP INDEX CONCURRENTLY IF EXISTS <invalid_index>;` outside a migration.
|
||||
3. If a migration built it, Flyway recorded that version as failed (`success = false`) and refuses
|
||||
every later deploy until that row is gone: dropping the index does not clear it. Follow
|
||||
[migration-failed.md](../runbooks/migration-failed.md) "Recover a failed concurrent index
|
||||
migration", which removes the cause and deletes that one row.
|
||||
4. Re-apply the index migration.
|
||||
2. If a migration was building, rebuilding or dropping it, Flyway recorded that version as failed
|
||||
(`success = false`) and refuses every later deploy until that row is gone: dropping the index
|
||||
does not clear it. Follow [migration-failed.md](../runbooks/migration-failed.md) "Recover a
|
||||
failed concurrent index migration" instead of the next step. It removes the cause, drops the
|
||||
index a failed build or rebuild left, and deletes that one row. It leaves the index a failed
|
||||
`DROP INDEX CONCURRENTLY` left, for the deploy again to drop: dropped by hand, that statement
|
||||
finds no index and fails again.
|
||||
3. Otherwise run `DROP INDEX CONCURRENTLY IF EXISTS <invalid_index>;` outside a migration, and
|
||||
re-apply the index migration.
|
||||
|
||||
The platform does not drop these automatically: on a rolling deploy every instance would race to
|
||||
drop an index another instance was about to finish building.
|
||||
|
||||
@@ -63,13 +63,14 @@ status: active
|
||||
case — clean it up with `outbox-dead-letter.md` §8 and rerun, the migration stays as it is;
|
||||
- checksum mismatch: compare the deployed artifact with the already applied script before
|
||||
considering repair;
|
||||
- a concurrent index migration failed (`CREATE [UNIQUE] INDEX CONCURRENTLY` or `REINDEX …
|
||||
CONCURRENTLY` that Flyway ran outside a transaction): a duplicate value for a unique
|
||||
index, a deadlock, `statement_timeout` or a cancelled build. Outside a transaction nothing
|
||||
rolled back: the migration left an invalid index and a history row with
|
||||
`success = false` for that version, and every later deploy fails validation ("Detected failed
|
||||
migration to version …") until the row is gone. Dropping the index alone does not clear it.
|
||||
Follow "Recover a failed concurrent index migration" below;
|
||||
- a concurrent index migration failed (`CREATE [UNIQUE] INDEX CONCURRENTLY`, `DROP INDEX
|
||||
CONCURRENTLY` or `REINDEX … CONCURRENTLY` that Flyway ran outside a transaction): a duplicate
|
||||
value for a unique index, a deadlock, `statement_timeout` or a statement cancelled while it
|
||||
waited for an open transaction. Outside a transaction nothing rolled back: the migration left
|
||||
an invalid index and a history row with `success = false` for that version, and every later
|
||||
deploy fails validation ("Detected failed migration to version …") until the row is gone.
|
||||
Dropping the index alone does not clear it. Follow "Recover a failed concurrent index
|
||||
migration" below;
|
||||
- connection/TLS failure: fix transport or credentials without changing Flyway history.
|
||||
|
||||
## Action
|
||||
@@ -129,17 +130,25 @@ FROM pg_stat_progress_create_index
|
||||
WHERE datname = current_database();
|
||||
```
|
||||
|
||||
2. Drop the invalid index the build left (`docs/jpa/runbooks.md` "An invalid index exists" lists
|
||||
them). Run it on its own, not inside `BEGIN`: `CONCURRENTLY` refuses a transaction block.
|
||||
2. Remove the cause. For a unique index, clean up the duplicate rows with the data owner (a forward
|
||||
fix, never by editing the migration). For a deadlock, a timeout or a cancelled statement, end or
|
||||
wait out the transaction that held it: a build or a rebuild waits for every transaction older
|
||||
than itself, a drop for every transaction that holds a lock on its table. Do this before step 3,
|
||||
whose `DROP INDEX CONCURRENTLY` waits for the same transactions.
|
||||
3. Drop the invalid index a failed build or rebuild left: the index a `CREATE [UNIQUE] INDEX
|
||||
CONCURRENTLY` names, or the copy a `REINDEX … CONCURRENTLY` made, named after the index with
|
||||
`_ccnew` (or `_ccold`) on the end (`docs/jpa/runbooks.md` "An invalid index exists" lists them).
|
||||
Run it on its own, not inside `BEGIN`: `CONCURRENTLY` refuses a transaction block.
|
||||
**Skip this step when the failed statement is `DROP INDEX CONCURRENTLY`.** The invalid index it
|
||||
left is the index the migration drops, and the deploy in step 5 runs the same statement, which
|
||||
drops it. Dropped by hand first, that statement fails with `42704` ("index … does not exist")
|
||||
and leaves a new failed row.
|
||||
|
||||
<!-- runbook-sql: failed-concurrent-index-drop -->
|
||||
```sql
|
||||
DROP INDEX CONCURRENTLY IF EXISTS <invalid_index>;
|
||||
```
|
||||
|
||||
3. Remove the cause. For a unique index, clean up the duplicate rows with the data owner (a forward
|
||||
fix, never by editing the migration). For a deadlock or a timeout, end or wait out the
|
||||
transaction that held the build.
|
||||
4. Delete that version's failed row from the stream's history table, and nothing else. `<version>`
|
||||
is the `version` column of the failed row as the Diagnosis query shows it (`22.1` for
|
||||
`V22_1__…`). It must delete exactly one row; if it deletes none, this is not the failure this
|
||||
@@ -151,15 +160,18 @@ DELETE FROM <owned_history_table>
|
||||
WHERE version = '<version>' AND NOT success;
|
||||
```
|
||||
|
||||
5. Deploy again. Flyway runs the same migration from the start and builds the index.
|
||||
5. Deploy again. Flyway runs the same migration from the start: it builds the index, rebuilds it,
|
||||
or drops the index the failed drop left.
|
||||
|
||||
The failed row is the record of a version that never applied, so deleting it leaves the order and
|
||||
the checksum of every applied version as they were. Do not use `flyway repair` for this: it also
|
||||
rewrites the checksums and descriptions of the remaining rows to match the scripts on disk, which
|
||||
removes the evidence a checksum mismatch carries. `:adapter:outbound:persistence-jpa:postgresqlConcurrentIndexMigrationIntegrationTest`
|
||||
runs the three SQL blocks above, read from this file, against real PostgreSQL: a unique build fails
|
||||
on a duplicate, steps 1–4 run, and the next deploy applies the version with the index valid and the
|
||||
earlier version's checksum unchanged.
|
||||
runs the three SQL blocks above, read from this file, against real PostgreSQL for each statement
|
||||
this section covers: a unique build that fails on a duplicate, and a rebuild and a drop cancelled
|
||||
while they wait for an open transaction. Steps 1–4 run in order, step 3 for the build and the
|
||||
rebuild only, and the next deploy applies the version with no invalid index left and the earlier
|
||||
version's checksum unchanged.
|
||||
|
||||
## Escalation
|
||||
|
||||
|
||||
@@ -1373,18 +1373,24 @@ Flyway 기본값: 잠금 트랜잭션(열린 채) ──기다림──▶ 마
|
||||
검사 대상: `CREATE [UNIQUE] INDEX CONCURRENTLY`, `DROP INDEX CONCURRENTLY`, `REINDEX … CONCURRENTLY`
|
||||
(`REINDEX (CONCURRENTLY) TABLE` 같은 괄호 옵션 포함).
|
||||
|
||||
`requireIsolatedStatement`도 있다 — concurrent 빌드가 실패하면 invalid index와 그 버전의
|
||||
`requireIsolatedStatement`도 있다 — concurrent 문장이 실패하면 invalid index와 그 버전의
|
||||
**실패 이력 행**(`success = false`)이 남는다. Flyway는 그 행이 있는 한 다음 배포를 validate에서 거부한다.
|
||||
그래서 인덱스만 지우고 다시 배포하면 또 멈춘다.
|
||||
|
||||
```
|
||||
실패한 동시 빌드 → invalid index + 실패 이력 행
|
||||
→ 빌드가 아직 도는지 확인 → DROP INDEX CONCURRENTLY → 원인 정리(중복 행 등)
|
||||
실패한 동시 인덱스 문장 → invalid index + 실패 이력 행
|
||||
→ 빌드가 아직 도는지 확인 → 원인 정리(중복 행, 붙잡던 열린 트랜잭션)
|
||||
→ 빌드·재빌드가 남긴 invalid index를 DROP INDEX CONCURRENTLY
|
||||
→ 그 버전의 실패 이력 행만 DELETE → 다시 배포
|
||||
```
|
||||
|
||||
- 원인 정리가 먼저다. 운영자의 `DROP INDEX CONCURRENTLY`도 그 테이블을 잡은 열린 트랜잭션을 기다린다.
|
||||
- 실패한 문장이 `DROP INDEX CONCURRENTLY`면 남은 invalid index는 그 마이그레이션이 지우려던 인덱스다.
|
||||
손으로 지우지 않는다. 다시 배포한 같은 문장이 지운다. 먼저 지우면 그 문장이 없는 인덱스(`42704`)로 또 실패한다.
|
||||
|
||||
- 절차와 SQL은 `docs/runbooks/migration-failed.md` "Recover a failed concurrent index migration"에 있다.
|
||||
`PostgreSqlConcurrentIndexMigrationIntegrationTest`가 그 SQL을 runbook에서 읽어 실제 PostgreSQL에서 돌린다.
|
||||
`PostgreSqlConcurrentIndexMigrationIntegrationTest`가 그 SQL을 runbook에서 읽어 세 문장(중복으로 실패한 unique 빌드,
|
||||
열린 트랜잭션을 기다리다 취소된 재빌드와 drop)마다 실제 PostgreSQL에서 돌린다.
|
||||
- 실패 이력 행을 지우는 것은 "이력을 고치지 않는다"의 하나뿐인 예외다(소유자 결정 2026-11-06).
|
||||
실패 행은 적용되지 않은 버전의 기록이라, 지워도 성공한 버전의 순서와 checksum은 그대로다.
|
||||
- `flyway repair`는 여전히 쓰지 않는다. 남은 행의 checksum·설명까지 디스크의 스크립트에 맞춰 다시 쓰기 때문이다.
|
||||
|
||||
@@ -4,7 +4,7 @@
|
||||
- 커밋: `34565130` High·P1 19건 · `1400dc15` 남은 발견·매뉴얼·생성 명령 · `5786126c` 남은 항목과 합친 뒤 결함 ·
|
||||
`7ef8d0b4` 재리뷰 기록 · `bbe944bd` 재리뷰 결함 · `ecc74b7d` 2차 재리뷰 기록·이 안내 · `1885bf8d` 2차 재리뷰 결함 ·
|
||||
`339cf8fd` 3차 확인 리뷰 기록 · `f40c03c6` 3차 확인 리뷰 Minor · `c2e55510` 마지막 확인 리뷰 기록 ·
|
||||
`2678955c` 테스트 코드 정적 분석(B-40) · `70fb80bf` 소유자가 다시 정한 기본값 3가지(늦은 멱등 완료 기록, `failure-retention` 기동 검사, workflow `cd`) · B4 성능 lane 단언 상시화(2026-11-06, B-43) · `paths` 필터 trigger를 단계 실행으로 세지 않음(2026-11-06 소유자 결정, B-36) · r8-f1 전송 오류 처리(2026-11-07, B-45~B-48) · 태그 push·`release` workflow는 `releaseCheck`에만 셈(2026-11-07 소유자 결정, B-36) — `docs(...)` 커밋은 문서만 바꾼다
|
||||
`2678955c` 테스트 코드 정적 분석(B-40) · `70fb80bf` 소유자가 다시 정한 기본값 3가지(늦은 멱등 완료 기록, `failure-retention` 기동 검사, workflow `cd`) · B4 성능 lane 단언 상시화(2026-11-06, B-43) · `paths` 필터 trigger를 단계 실행으로 세지 않음(2026-11-06 소유자 결정, B-36) · r8-f1 전송 오류 처리(2026-11-07, B-45~B-48) · 태그 push·`release` workflow는 `releaseCheck`에만 셈(2026-11-07 소유자 결정, B-36) · 실패한 동시 인덱스 drop의 복구 절차(2026-11-07, 재리뷰 RR8-03-01, 5절) — `docs(...)` 커밋은 문서만 바꾼다
|
||||
- 근거 문서: `docs/reviews/2026-11-01-maturity-review/README.md` 13~16절, `docs/reviews/2026-11-03-rereview/README.md`
|
||||
4·6·8~13절, 각 커밋의 `BREAKING CHANGE:` 꼬리말
|
||||
- 아래 표의 각 줄은 위 범위의 diff와 코드로 확인했다. 확인하지 못한 것은 그 자리에 "확인 못 함"으로 적었고 9절에
|
||||
@@ -254,7 +254,7 @@ V21 실패의 분류는 `docs/runbooks/migration-failed.md` "Classify the failur
|
||||
| 서버 로그(STOMP 거부·감싼 carrier, 2026-11-07) | `@MessageMapping` 앞에서 Spring이 거부한 메시지를 WARN 한 줄 `request refused as <code> by <예외 타입>`으로 남긴다: 읽지 못한 payload(`MessageConversionException`)·비었거나 검증에 걸린 payload(`MethodArgumentNotValidException`)는 `VALIDATION_FAILED`, 변환되지 않는 `@DestinationVariable`·`@Header`(`ConversionFailedException`)는 `BAD_PARAMETER`. 전에는 ERROR에 예외 메시지(받은 JSON 조각·값)까지 남겼다. 응답을 쓰지 못한 변환 실패는 그대로 ERROR. 네 전송 모두 감싼 carrier를 그 carrier 줄로 남긴다(감싼 persistence 실패는 분류만, SQL 원인 없음) | ERROR 경보가 클라이언트의 잘못된 메시지에 울리지 않는다. 그 실패를 찾던 로그 검색은 WARN으로 바꾼다 | r8-f1(재리뷰 RR7-01-06·RR7-01-05) · `src/adapter/inbound/websocket/.../stomp/StompHandlerFailureLog.java`, `src/shared-contract/.../error/ServerFailureLog.java` `refused` |
|
||||
| sample-portfolio | 익명 쓰기 401, 포스터 제목 대소문자 무시 유일(409 `POSTER_ALREADY_EXISTS`), 관리자도 남의 work log 수정 불가, 샘플 이벤트 tenant `global` | sample을 남긴 서비스만 | `34565130`, `1400dc15` |
|
||||
| Flyway 잠금 | Flyway의 PostgreSQL 마이그레이션 잠금을 트랜잭션 대신 세션에 둔다. Spring Boot의 Flyway는 module-defaults `spring.flyway.postgresql.transactional-lock: false`, 템플릿이 직접 만드는 Flyway(멱등성·알림·sample stream, schema-per-tenant, testkit `MigrationContractRunner`)는 `FlywaySchemaPolicy.configure()`, messaging inbox stream은 같은 값을 직접 넣는다. 운영 코드의 `Flyway.configure()` 직접 호출과 설정 객체 직접 생성(`new FluentConfiguration()`·`new ClassicConfiguration()`·그 하위 클래스, round7 RR7-03-06)은 `JpaProductionArchitectureTest`가 거부한다 | Flyway 기본값에서는 동시 인덱스 마이그레이션이 Flyway 자신의 열린 트랜잭션을 기다려 끝나지 않았다. 이제 끝난다. 마이그레이션은 잠금을 잡은 연결 하나로 돈다. transaction 모드 PgBouncer 뒤에서는 잠금 해제가 다른 서버 연결로 가 다음 배포가 기다릴 수 있으니 마이그레이션은 직접 연결이나 session 모드 pool로 돌린다. 배포 도구는 이 repo 밖이라 2절 15번으로 맞춘다 | 재리뷰 round6 RR6-03-01 · `persistence-jpa.yml`, `.../migration/FlywaySchemaPolicy.java`, `docs/jpa/migration-guide.md` "Who may change the schema"·"Concurrent index builds" |
|
||||
| 실패한 동시 인덱스 마이그레이션 복구 | `docs/runbooks/migration-failed.md`에 「Recover a failed concurrent index migration」을 더했다: 진행 중인 빌드가 없는지 보고, 무효 인덱스를 `DROP INDEX CONCURRENTLY`로 지우고, 원인을 정리하고, 그 버전의 실패 이력 행(`success = false`)만 지운 뒤 다시 배포한다. 「Do not」의 이력 수정 금지에 이 한 가지 예외를 적었다. `flyway repair`는 계속 쓰지 않는다 | 전에는 안내가 "`DROP INDEX` 하나"였고, 그대로 하면 남은 실패 이력 때문에 다음 배포가 validate에서 다시 멈췄다. 동시 인덱스 마이그레이션을 쓰는 서비스의 운영자는 이 절차로 복구한다 | 재리뷰 round7 RR7-03-03, 소유자 결정 2026-11-06 · `docs/jpa/migration-guide.md` "Concurrent index builds", `PostgreSqlConcurrentIndexMigrationIntegrationTest` |
|
||||
| 실패한 동시 인덱스 마이그레이션 복구 | `docs/runbooks/migration-failed.md`에 「Recover a failed concurrent index migration」을 더했다: 진행 중인 빌드가 없는지 보고, 원인(중복 행, 문장을 붙잡던 열린 트랜잭션)을 정리하고, 실패한 빌드·재빌드가 남긴 무효 인덱스를 `DROP INDEX CONCURRENTLY`로 지우고, 그 버전의 실패 이력 행(`success = false`)만 지운 뒤 다시 배포한다. 실패한 문장이 `DROP INDEX CONCURRENTLY`면 남은 무효 인덱스는 지우지 않는다. 그 마이그레이션이 지우려던 인덱스라 다시 배포한 같은 문장이 지운다. 「Do not」의 이력 수정 금지에 이 한 가지 예외를 적었다. `flyway repair`는 계속 쓰지 않는다 | 전에는 안내가 "`DROP INDEX` 하나"였고, 그대로 하면 남은 실패 이력 때문에 다음 배포가 validate에서 다시 멈췄다. 실패한 drop의 인덱스를 손으로 지우면 다시 배포한 문장이 `42704`(없는 인덱스)로 또 실패한다. 동시 인덱스 마이그레이션을 쓰는 서비스의 운영자는 이 절차로 복구한다 | 재리뷰 round7 RR7-03-03, round8 RR8-03-01, 소유자 결정 2026-11-06 · `docs/jpa/migration-guide.md` "Concurrent index builds", `PostgreSqlConcurrentIndexMigrationIntegrationTest` |
|
||||
| 성능 lane(HTTP client·Mongo) | httpclient `LargeBodyResourceTest`의 힙 상한(32 MiB 스트리밍 중 힙 증가 16 MiB 미만)을 매번 단언한다. 전에는 `-Pperformance.assertions.enabled=true`일 때만 단언하고 아니면 건너뛴다는 줄만 찍었다. Mongo `MongoResourceBudgetLaneTest`는 표준 gate 전체(p99 500ms, pool 대기 250ms, 힙 512 MiB, examined/returned 10, spill 금지)를 Gradle 밖 실행에서도 단언한다(B-43) | 손으로 돌린 `performanceCheck`가 상한을 실제로 재므로, 전에는 통과하던 느린 기계에서 실패할 수 있다 | B4(2026-11-06) · `LargeBodyResourceTest`, `MongoResourceBudgetLaneTest` |
|
||||
| 보안 필터 로그 레벨 | 보안 필터(`AuthErrorResponseWriter`)의 `security failure` 줄을 5xx(`AUTH_JWKS_UNAVAILABLE` 503, `INTERNAL_AUTH_MISCONFIGURATION` 500)면 ERROR, 4xx면 WARN으로 남긴다. 전에는 모두 WARN이었다. 다른 경로가 5xx를 ERROR로 남기는 규칙(`ServerFailureLog`)과 같아졌다 | ERROR로 거르는 로그 경보·대시보드에 JWKS 장애와 인증 설정 오류가 새로 잡힌다. 401·403은 그대로 WARN | 설계 메모 2026-11-06 7절 결정 2 · `src/adapter/inbound/web/.../auth/AuthErrorResponseWriter.java`, `docs/superpowers/specs/2026-11-06-error-code-log-level-design.md` |
|
||||
|
||||
|
||||
Reference in New Issue
Block a user