The probe accepts a decode only when it matches the primary candidate's
pixel size exactly. fit inside/outside keep the source ratio, so for any
asset whose ratio differs the preset could only fail with
INTEGRITY_FAILED, and PRIVATE_SIGNED forces the probe. Per D-12 the
registry now rejects PRIMARY_REQUIRED unless fit is cover, contain or
fill; ratio-preserving fits stay allowed on presets without the probe.
README and the architecture doc state the rule.
Verified: RED test "allows a PRIMARY_REQUIRED probe only with an
exact-size fit" (inside/outside were accepted) + all gates.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A corrupt row, or one a newer build wrote with an unknown schemaVersion,
failed both upload and abort with CORRUPT_DATA until the whole partition
was deleted. The checkpoint store port gains an optional
removeUnreadable(): in one transaction it deletes the row only if it does
not parse as a checkpoint (a readable row is CONFLICT, an absent row is a
success). Explicit abort calls it on a CORRUPT_DATA read and reports
ORPHANED; the server session is left to expire because the row names no
session. upload() still fails closed on such a row. The port change is
additive (optional method); the architecture doc notes the exception.
Verified: RED tests "removes an unreadable checkpoint row on abort and
reports ORPHANED" (was CORRUPT_DATA) and "removes only an unreadable row
without a revision" (method missing) + all gates.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
When a put failed before commit and the compensating ABORT_PUT or the
journal rollback did not complete, the coordinator returned a generic
CONFLICT / OBJECT_RECONCILE (or the rollback's own code). A user cancel or
a full disk reached the caller as a bare conflict.
compensatePreparedPut now takes the put's failure and returns it. If the
compensation completes, the failure is returned as before. If it does not,
the journal row is still left for reconciliation, and the failure keeps its
code, operation and retryable flag; only recovery becomes RECONCILE. The
architecture doc's compensation rule says the same.
Verified: new tests in tests/unit/opfs-byte-store.test.ts were RED (5
cases: failed cleanup, unknown cleanup effect, caller cancel, failed
rollback, FILES_READY failure) and are GREEN; the successful-compensation
case pins the unchanged path. All gates pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Decision D-13 keeps the storage schema as is: IndexedDB `remove` deletes
the row without a tombstone and an OPFS delete removes the logical object
row, so a recreated key starts again at revision 1 / generation 1.
The IndexedDB write receipt's `revision` and the durable object
descriptor's `generation` now say so in the port comments, and the storage
architecture doc says it in the IndexedDB record section and the OPFS
journal rules: callers must not treat `(key, revision)` or
`(objectId, generation)` as unique across the key's lifetime, and should
compare a value they own (or the integrity root digest) when it matters.
Documentation only. verify:documentation and all gates pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The runtime and maintenance each carried their own Stored* row types,
isStored* validators, record size formula, countBucket and failureOf, and
the dataset binding check had a third, hand-written budget validator. A
field added to one copy would make the other judge a healthy row corrupt.
indexeddb-records.ts now holds the row types, the validators, the budget
key and measureRecordBytes (payload + 512-byte envelope + UTF-16 key). Each
call site keeps its own failure code for a bad measurement (runtime
INVALID_INPUT, maintenance MIGRATION_FAILED), and only the binding check
still bounds a stored budget by hardBudgetBytes. The one validator
difference (maintenance's retention check did not re-validate the key it
compared against) is unobservable: it always passes a validated record key.
Verified: characterization tests added first in
tests/unit/indexeddb-maintenance.test.ts pin the size formula in both
writers, the per-site failure codes for NaN/negative/oversized sizes, and
the hardBudgetBytes bound at open (runtime and maintenance fail with
POLICY_REJECTED one byte over, open at the limit). They passed before and
after the refactor. INVENTORY.md (137/137) and the storage detail table
list the new file. All gates pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
6f6c48e added src/adapters/http/platform-error-mapping.ts and
src/adapters/telemetry/feature-telemetry.ts without ledger rows, so
check:adapter-inventory failed on the base branch. Add both rows, renumber,
update the total to 136/136 and add the matching detail-review rows.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Prepared objects were validated in three places with different rules. The
worker required integrity.chunkSizeBytes, chunk sizes, chunk count and
object size to match the current runtime policy; the journal checked the
object against itself; the page only checked the shape. Changing
chunkSizeBytes (allowed by opfs-policy) made every existing object fail:
open returned INTEGRITY_FAILED, FILES_READY reconcile failed CORRUPT_DATA
(and, had cleanup succeeded, would have rolled back a valid object), and
COMMITTED reconcile failed INVALID_INPUT at FINALIZE_PUT.
The journal's policy-free rules move to opfs-prepared-object.ts, the one
definition of isPreparedObject (and of the physical schema check). The
worker's VERIFY_OBJECT, READ_CHUNK, FINALIZE_PUT and FILES_READY receipt
paths and the page's FINISH_PUT parse use it, so a stored object is
checked against its own manifest. The current policy still governs new
writes only: validateObjectWriteInput, BEGIN_PUT's chunk size check and
APPEND_CHUNK's size and count limits are unchanged. stableJson keeps its
two copies; they differ in how a non-finite number fails and unifying
them would change error mapping.
Verified: new test "R-5.5 stored objects are checked against their own
chunk size" writes an object with 64 KiB chunks, then reconciles and opens
it through a 128 KiB runtime. Before the fix reconcile failed CORRUPT_DATA
and open failed INTEGRITY_FAILED; now reconcile commits without rollback,
the bytes read back, and a new put uses 128 KiB chunks. A new journal test
pins that a 4 MiB-chunk object round-trips and an inconsistent one is
still rejected (passes before and after). Inventory and the storage
detail review list the new file.
Gates: check:architecture, check:types:app/test/web-worker, lint,
test:component pass; test:unit passes except removal-fixture.test.ts
(needs gitignored release artifacts absent from a fresh worktree);
check:adapter-inventory accepts the new row but still reports two rows
already missing at f0d3953 (http/platform-error-mapping.ts,
telemetry/feature-telemetry.ts).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The default policy has allowedVaryHeaderNames: [], so any Vary header was
POLICY_REJECTED. nginx `gzip_vary` and most CDNs send
`Vary: Accept-Encoding` on JS and CSS, so the default policy could not
stage real assets. Accept-Encoding is a forbidden request header, so a
policy could not allowlist it as a request header either.
validateVary now skips `accept-encoding`. No script-built Request carries
that header, so the stored and lookup requests both lack it and Cache.match
still matches exactly. Every other Vary name keeps the existing checks.
A policy whose allowedResponseHeaderNames lacked `content-type` passed
assertPublicCachePolicy, but activation re-validates the stored
Content-Type, so every activation failed as INTEGRITY_FAILED. The policy
check now rejects it. The ops runbook lists both rules.
Verified: "stages, activates and looks up a Vary: Accept-Encoding response
with the default policy" (stage returned ok:false) and "rejects a policy
that strips Content-Type from stored responses" (no throw) failed before
the fix and pass now. check:architecture, check:types:app,
check:types:test, lint, test:component, verify:documentation pass.
test:unit passes except removal-fixture, which needs generated
artifacts/release files that a fresh worktree lacks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A tab whose BroadcastChannel postMessage failed once called
closeBroadcast(), which also removed its receive listener. Publishers
that broadcast successfully never write a storage pulse, so from then on
the tab missed every other tab's event while reporting
ACTIVE_STORAGE_FALLBACK. A tab whose BroadcastChannel failed to open had
the same blind spot and the same healthy-looking status.
Per D-4 there is no dual broadcast+storage publishing. Instead:
- A publish failure only sets broadcastPublishFailed. Later publishes go
to storage, and the channel stays open for receiving.
- BROADCAST_OPEN_FAILED now yields the additive status
DEGRADED_STORAGE_FALLBACK (the union lives in the adapter and is only
passed through by bootstrap). A browser without BroadcastChannel at all
keeps ACTIVE_STORAGE_FALLBACK, because every tab there uses storage.
- A successful storage publish recomputes the status instead of forcing
ACTIVE_STORAGE_FALLBACK, so it cannot hide the degraded state.
Existing tests fixed: "falls back when BroadcastChannel open or publish
fails" and "enters explicit local-only degradation when every transport
fails" expected ACTIVE_STORAGE_FALLBACK for a tab whose channel failed to
open. The ops runbook lists the new status.
Verified: "keeps receiving broadcasts after its own broadcast publish
fails" (received [] instead of [BROADCAST]) and the open-failure status
assertion (ACTIVE_STORAGE_FALLBACK) failed before the fix and pass now.
check:architecture, check:types:app, check:types:test, lint,
test:component, verify:documentation pass. test:unit passes except
removal-fixture, which needs generated artifacts/release files that a
fresh worktree lacks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Record the whole-src review findings by area with severity, location,
failure scenario, fix direction and test coverage.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>