문제 .env.example과 운영 문서는 runtime config를 재빌드 없이 바꿀 수 있다고 적는다(SERVICE_WORKER DISABLED, FEATURE_OVERRIDES). 그런데 고친 문서를 검사할 명령이 없다. check:release-admission은 dist/config.json만 읽고, build:profile은 BUILD_ID를 덮어 다시 만든다. 브라우저는 부팅 때 문서를 스키마로 검사하고 BUILD_ID를 HTML과 맞춰 보므로, 오타 하나나 BUILD_ID 변경 하나가 모든 사용자의 BOOT_CONFIG_FAILURE가 된다. FE-RB-001은 세 줄이고 고치는 방법이 없다. 고른 방법 - check-release-admission.ts가 `--config <고친 사본> --original <배포된 원본>`을 받는다. 사본에 기존 검사(스키마, 대상 규칙)를 그대로 돌리고, 원본과 비교해 CAPABILITY_OVERRIDES·FEATURE_OVERRIDES 밖의 필드가 하나라도 바뀌면 거절한다. BUILD_ID·RELEASE_ID 유지는 이 규칙에 들어 있다. `--original` 없이 `--config`만 주면 거절한다(비교 대상 없이 통과시키지 않는다). - 사본 검사는 artifacts/release/deployment-admission.json을 쓰지 않는다. 그 파일은 빌드의 승인 증거(CI artifact)이고 운영자의 사본은 빌드가 아니다. - FE-RB-001에 네 단계(사본 두 개 받기·고치기 → 검사 → 같은 파일시스템에서 rename으로 교체, 되돌리기도 같은 방법 → 깨끗한 세션 부팅 확인)를 적고, release-cache-rollback.md와 browser-file-storage-recovery.md의 스위치 설명이 그 절차를 가리킨다. .env.example 문장을 "비상 스위치만 재빌드 없이 바꾼다"로 좁혔다. - pnpm이 `--`를 넘겨도 되도록 맨 앞 `--`를 버린다. 버린 대안 - `--build-id <id>`로 BUILD_ID만 대조: API_BASE_URL·RELEASE_MANIFEST_URL처럼 빌드가 정한 다른 필드를 바꿔도 통과한다. 원본 전체 비교가 같은 비용으로 더 좁다. - release-manifest.json에서 build id를 읽기: 운영자가 받을 파일이 하나 더 늘고, 여전히 BUILD_ID만 본다. - 비상 스위치도 빌드로만 바꾸기: 장애 대응 시간이 빌드·승격 시간만큼 늘어 스위치의 목적이 사라진다(리뷰 대안 비교). 위험·한계 - 원본과 사본의 중첩 객체 비교는 JSON.stringify라 키 순서만 달라도 "바뀜"으로 거절한다(닫힌 쪽으로 실패). - 실제 서버에서 사본을 바꿔 부팅해 보지 않았다. 바뀐 문서가 release 기록(checksums.txt, 승격 archive)과 달라지는 점은 런북에 적기만 했다. 검증 - RED: node scripts/run-vitest.ts run tests/unit/deployment-admission.test.ts 새 6건 실패. 모두 "release admission refused: dist/config.json is unreadable"(--config를 무시하고 dist를 읽음) - GREEN: 같은 파일 22 passed. 스위치만 바꾼 사본 ADMITTED·기록 없음, SERVICE_WORKER "DISABLE" 오타·BUILD_ID/RELEASE_ID/API_BASE_URL 변경· --original 누락은 exit 1 - runbook-contract, runbook-drill, feature-override-diagnostics 포함 35 passed - 실제 local 빌드에서 인자 없는 기존 경로 ADMITTED(기록 작성), `-- --config dist/config.json --original public/config.json` ADMITTED - tsc(node, test), eslint 바뀐 파일, verify-documentation-readiness PASS_SCOPED Refs: docs/reviews/2026-11-01-maturity-review/13-build-release-supply-chain.md 13-05
29 lines
1.3 KiB
Bash
29 lines
1.3 KiB
Bash
# Build-time inputs (§6.1). These are compiled into the bundle by Vite, so
|
|
# everything here is public by definition. Never put a secret in this file or in
|
|
# any `.env*` file: a frontend has no confidential storage, and a value that
|
|
# reaches the browser has been published.
|
|
#
|
|
# Runtime configuration — API endpoints, auth mode, telemetry, capability
|
|
# switches — is NOT here. It lives in `config/runtime/<profile>.json` and is
|
|
# materialized into `dist/config.json` at build time. Only the emergency
|
|
# switches (CAPABILITY_OVERRIDES, FEATURE_OVERRIDES) may be changed in a
|
|
# deployed config.json without rebuilding, by the checked procedure in
|
|
# docs/runbooks/FE-RB-001.md. See the "Runtime configuration" section of
|
|
# README.md.
|
|
#
|
|
# Copy to `.env.local` (git-ignored) to override locally.
|
|
|
|
# Identifies the build in release manifests and the runtime document.
|
|
# CI supplies the real value; a developer build falls back to "local-build".
|
|
VITE_BUILD_ID=local-build
|
|
|
|
# Source revision the bundle was produced from.
|
|
VITE_COMMIT_SHA=local
|
|
|
|
# Sub-path the app is served under. Must start and end with "/".
|
|
# Feeds the router, the Service Worker scope and Vite's asset base together.
|
|
VITE_ROUTER_BASE_PATH=/
|
|
|
|
# Where the browser fetches the runtime document from at boot.
|
|
VITE_RUNTIME_CONFIG_URL=/config.json
|