docs(keycloak-session-store): import the session-storage lab as a new project

The keycloak project ended with four open questions that design could not
settle. A two-VM lab was built to answer them by measurement, and this is
that material: 26 experiments, 125 raw command outputs, 22 browser captures.

Follows the import procedure in README.md.

  source/     the originating repository verbatim — 78 documents, 28 SVGs,
              8 manifests, plus .source-revision recording the commit
  final/      the SSOT
    document.md   729 lines written from the 29 experiment documents, not
                  concatenated: what was predicted, what was measured, and
                  where the measurement itself was wrong
    evidence/raw    125 outputs, flattened to <experiment>__<file> because
                    the originals collided (01-baseline.txt appeared three
                    times) and the audit only globs the top level
    evidence/meta   one per raw file; command and exitCode are null and the
                    README says why rather than inventing them
    evidence/browser  22 captures
    assets/       three diagrams through techviz
    .techviz/     their VizSpecs

A separate project rather than an addition to keycloak: the B-layer answers
that project's four questions, but the A, C and D layers are about cluster
failure, SSO and operations, and one document.md should hold one subject.
The four question records there can point here through 관계.

Recorded rather than papered over: only three of the 28 diagrams were
remade. The repository forbids hand-drawn SVG and forbids titles inside the
canvas; all 28 originals carry both, so converting them is redrawing, not
reformatting. They stay in source/ and the gap is written into the document.

verify-pipeline.py passes. audit-records.py reports no issues.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

docs/keycloak-session-store/source/docs/reverse-proxy-headers.md

@@ -0,0 +1,15 @@
+# Reverse proxy headers
+
+TLS를 reverse proxy에서 종료하면 Keycloak은 브라우저가 사용한 외부 origin을
+정확히 알아야 한다. 배포 예제는 다음 계약을 함께 적용한다.
+
+- nginx는 `Host`, `X-Forwarded-Host`, `X-Forwarded-Port`,
+  `X-Forwarded-Proto`, `X-Forwarded-For`를 덮어쓴다.
+- Keycloak은 `KC_PROXY_HEADERS=xforwarded`로 그 헤더 형식을 명시한다.
+- `KC_HOSTNAME`은 외부 HTTPS URL로 고정하고 strict hostname 검증을 켠다.
+- Keycloak의 8080 포트는 public으로 publish하지 않고 proxy network에서만
+  접근시킨다. 신뢰되지 않은 클라이언트가 forwarded header를 직접 넣을 수
+  있으면 안 된다.
+
+`scripts/verify-reverse-proxy-headers.sh`는 양쪽 설정의 짝과 nginx 구문을
+검증한다.