DongHyeonkaandClaude Opus 5
b2963105a8
The keycloak project ended with four open questions that design could not
settle. A two-VM lab was built to answer them by measurement, and this is
that material: 26 experiments, 125 raw command outputs, 22 browser captures.
Follows the import procedure in README.md.
source/ the originating repository verbatim — 78 documents, 28 SVGs,
8 manifests, plus .source-revision recording the commit
final/ the SSOT
document.md 729 lines written from the 29 experiment documents, not
concatenated: what was predicted, what was measured, and
where the measurement itself was wrong
evidence/raw 125 outputs, flattened to <experiment>__<file> because
the originals collided (01-baseline.txt appeared three
times) and the audit only globs the top level
evidence/meta one per raw file; command and exitCode are null and the
README says why rather than inventing them
evidence/browser 22 captures
assets/ three diagrams through techviz
.techviz/ their VizSpecs
A separate project rather than an addition to keycloak: the B-layer answers
that project's four questions, but the A, C and D layers are about cluster
failure, SSO and operations, and one document.md should hold one subject.
The four question records there can point here through 관계.
Recorded rather than papered over: only three of the 28 diagrams were
remade. The repository forbids hand-drawn SVG and forbids titles inside the
canvas; all 28 originals carry both, so converting them is redrawing, not
reformatting. They stay in source/ and the gap is written into the document.
verify-pipeline.py passes. audit-records.py reports no issues.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
44 lines
2.9 KiB
Plaintext
44 lines
2.9 KiB
Plaintext
# 컴팩트 생성자가 네 입력을 세 방식으로 처리한다
|
|
public MongoPlatformSettings {
|
|
// Absent rather than empty is the normal case: a deployment that has opted the module in but
|
|
// configured no platform profile yet must still start, so binding treats "no profiles" as an
|
|
// empty map instead of a binding failure.
|
|
profiles = profiles == null ? Map.of() : Map.copyOf(profiles);
|
|
// Experimental, and therefore not a switch (MNG-INT-003). The driver-side source — watch,
|
|
// resumeAfter/startAfter, cursor lifetime, reconnection — is not shipped; what exists is policy
|
|
// and value objects that do not add up to a running consumer. Accepting the flag and ignoring
|
|
// it
|
|
// would leave an operator believing it took effect, so the value is refused rather than stored:
|
|
// zero beans, zero threads, and a `true` that cannot be honoured never becomes one that looks
|
|
// honoured.
|
|
changeStreams = false;
|
|
// Absent means the platform default, and a negative count is refused rather than clamped: a
|
|
// requirement of -1 is not a lenient requirement, it is a typo, and reading it as "no
|
|
// secondaries needed" is how a health view comes to report a cluster it never checked.
|
|
if (requiredSecondaries == null) {
|
|
requiredSecondaries = DEFAULT_REQUIRED_SECONDARIES;
|
|
}
|
|
if (requiredSecondaries < 0) {
|
|
throw MongoOperationRejectedException.of(
|
|
"config.secondaries",
|
|
"the required secondary count must not be negative; " + requiredSecondaries + " is");
|
|
}
|
|
|
|
# 시작 검증기의 변경 스트림 분기
|
|
104: if (changeStreamsEnabled && !capabilities.isStable(MongoCapability.CHANGE_STREAM)) {
|
|
105- throw MongoOperationRejectedException.of(
|
|
106- "startup.capability",
|
|
|
|
# 그 분기가 내는 문장이 저장소에 나오는 곳 전수
|
|
…/autoconfigure/MongoStartupValidator.java:107: "change streams are enabled but unavailable here: "
|
|
|
|
# changeStreams 라는 이름이 나오는 곳 전수 (다른 타입의 동명 정적 팩터리 포함)
|
|
test/java/dev/caskeleton/adapter/outbound/mongo/autoconfigure/MongoStartupValidationTest.java:63: assertThat(MongoPlatformSettings.empty().changeStreams())
|
|
test/java/dev/caskeleton/adapter/outbound/mongo/autoconfigure/MongoStartupValidationTest.java:76: assertThat(asked.changeStreams())
|
|
test/java/dev/caskeleton/adapter/outbound/mongo/api/profile/MongoRuntimeProfileTest.java:66: assertThatThrownBy(() -> standalone.require(MongoTopologyRequirement.changeStreams()))
|
|
main/java/dev/caskeleton/adapter/outbound/mongo/autoconfigure/MongoPlatformAutoConfiguration.java:363: properties.changeStreams(),
|
|
|
|
# MongoStartupValidator 를 만드는 곳 전수
|
|
test/java/dev/caskeleton/adapter/outbound/mongo/autoconfigure/MongoStartupValidatorTest.java:143: return new MongoStartupValidator(
|
|
main/java/dev/caskeleton/adapter/outbound/mongo/autoconfigure/MongoPlatformAutoConfiguration.java:354: new MongoStartupValidator(
|