DongHyeonkaandClaude Opus 5
b2963105a8
The keycloak project ended with four open questions that design could not
settle. A two-VM lab was built to answer them by measurement, and this is
that material: 26 experiments, 125 raw command outputs, 22 browser captures.
Follows the import procedure in README.md.
source/ the originating repository verbatim — 78 documents, 28 SVGs,
8 manifests, plus .source-revision recording the commit
final/ the SSOT
document.md 729 lines written from the 29 experiment documents, not
concatenated: what was predicted, what was measured, and
where the measurement itself was wrong
evidence/raw 125 outputs, flattened to <experiment>__<file> because
the originals collided (01-baseline.txt appeared three
times) and the audit only globs the top level
evidence/meta one per raw file; command and exitCode are null and the
README says why rather than inventing them
evidence/browser 22 captures
assets/ three diagrams through techviz
.techviz/ their VizSpecs
A separate project rather than an addition to keycloak: the B-layer answers
that project's four questions, but the A, C and D layers are about cluster
failure, SSO and operations, and one document.md should hold one subject.
The four question records there can point here through 관계.
Recorded rather than papered over: only three of the 28 diagrams were
remade. The repository forbids hand-drawn SVG and forbids titles inside the
canvas; all 28 originals carry both, so converting them is redrawing, not
reformatting. They stay in source/ and the gap is written into the document.
verify-pipeline.py passes. audit-records.py reports no issues.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
22 lines
995 B
Plaintext
22 lines
995 B
Plaintext
[속성 키] 같은 URI 를 두 키로 각각 넣어 본다
|
|
spring.mongodb.uri -> [canary-host:31337]
|
|
spring.data.mongodb.uri -> [localhost:27017]
|
|
|
|
[선언] production 프로파일이 말하는 값
|
|
tlsRequired=true stableApiStrict=true connectTimeout=2000ms serverSelection=3000ms poolMax=40 uuid=STANDARD
|
|
이 선언을 설정 검증이 통과시킨다
|
|
|
|
[실제] Boot 가 클라이언트를 만들 때 쓰는 설정 (커스터마이저 적용 후)
|
|
커스터마이저 2개 적용
|
|
sslEnabled=false
|
|
connectTimeoutMs=10000 serverSelectionTimeoutMs=30000
|
|
poolMaxSize=100 serverApi=null uuidRepresentation=UNSPECIFIED
|
|
|
|
[다른 경로] URI 를 건드리지 않고 ssl 속성만 켠다
|
|
spring.mongodb.ssl.enabled=true -> sslEnabled=true
|
|
|
|
[미도달] 팩토리가 만들었을 설정
|
|
sslEnabled=true
|
|
connectTimeoutMs=2000 serverSelectionTimeoutMs=3000
|
|
poolMaxSize=40 serverApi=ServerApi{version=V1, deprecationErrors=true, strict=true} uuidRepresentation=STANDARD
|