Files
document-haness/docs/clean-architecture-backend-template/tech-log-studio/runtime-reachability-and-composition/case/case-grpc-spring-boot-starter-f01.md
T
DongHyeonkaandClaude Opus 5 b2963105a8 docs(keycloak-session-store): import the session-storage lab as a new project
The keycloak project ended with four open questions that design could not
settle. A two-VM lab was built to answer them by measurement, and this is
that material: 26 experiments, 125 raw command outputs, 22 browser captures.

Follows the import procedure in README.md.

  source/     the originating repository verbatim — 78 documents, 28 SVGs,
              8 manifests, plus .source-revision recording the commit
  final/      the SSOT
    document.md   729 lines written from the 29 experiment documents, not
                  concatenated: what was predicted, what was measured, and
                  where the measurement itself was wrong
    evidence/raw    125 outputs, flattened to <experiment>__<file> because
                    the originals collided (01-baseline.txt appeared three
                    times) and the audit only globs the top level
    evidence/meta   one per raw file; command and exitCode are null and the
                    README says why rather than inventing them
    evidence/browser  22 captures
    assets/       three diagrams through techviz
    .techviz/     their VizSpecs

A separate project rather than an addition to keycloak: the B-layer answers
that project's four questions, but the A, C and D layers are about cluster
failure, SSO and operations, and one document.md should hold one subject.
The four question records there can point here through 관계.

Recorded rather than papered over: only three of the 28 diagrams were
remade. The repository forbids hand-drawn SVG and forbids titles inside the
canvas; all 28 originals carry both, so converting them is redrawing, not
reformatting. They stay in source/ and the gap is written into the document.

verify-pipeline.py passes. audit-records.py reports no issues.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-09-04 22:51:59 +09:00

5.0 KiB

kind, slug, title, topic, project, status, sourceRevision, rootTreeNode, evidenceCapturedOn, assets, evidence, source, module, priority
kind slug title topic project status sourceRevision rootTreeNode evidenceCapturedOn assets evidence source module priority
CASE grpc-spring-boot-starter-f01 시작 검증기가 시작 시 실행되지 않는다 runtime-reachability-and-composition clean-architecture-backend-template 게시 전 21234e38cdb9a926cbc92bb97a2aee2e4a7d2916 case:grpc-spring-boot-starter-f01 2026-09-01
key file
grpc-spring-boot-starter-f01 ../../../final/evidence/rendered/grpc-spring-boot-starter-f01.svg
key file
grpc-spring-boot-starter-f01-diagram ../../../final/assets/diagrams/grpc-spring-boot-starter-f01.svg
../../../final/evidence/raw/grpc-spring-boot-starter-f01.txt
원본 분석 절은 analysis/grpc/grpc-spring-boot-starter.md#L183 이다.
grpc-spring-boot-starter P2

시작 검증기가 시작 시 실행되지 않는다

GrpcPlatformStartupValidator 를 이름으로 부르는 파일은 둘뿐이다 — 자기 자신과 자기 테스트. GrpcPlatformAutoConfiguration 은 빈 9개를 만들고 requireValid 를 부르지 않는다.

문제

GrpcPlatformStartupValidator 를 이름으로 부르는 파일은 둘뿐이다 — 자기 자신과 자기 테스트.

GrpcPlatformAutoConfiguration 은 빈 9개를 만들고 requireValid 를 부르지 않는다.

결론

초기화 콜백도, @PostConstruct 도, ApplicationRunner 도 없다.

그래서 클래스 javadoc 이 약속한 성질이 성립하지 않는다 — "Refuses to start on a configuration that would be wrong in a way nobody would notice." 지금은 그 설정으로 그냥 시작한다.

검증기가 유일한 소비자인 설정 키가 넷이다.

transport — production 이 아닌 전송을 거부할 곳이 없다.

게다가 자동 설정은 이 값을 보지 않고 GrpcServerProfile.stableNetty(...) 를 하드코딩한다(§17.2).

tls-enabled · trust-all-certificates — 배포 환경의 TLS 바닥을 강제할 곳이 없다.

operation-ledger-enabled — 멱등 키 필수 메서드가 원장 없이 열리는 것을 막을 곳이 없다.

같은 저장소가 이 형태를 두 번 기록했다 — WebPlatformStartupValidator 가 시작 시 실행되지 않고, BrokerAclManifest 의 시작 자기점검이 없다.

검증 환경

OpenJDK : 21.0.12 java -version 으로 확인 Gradle : 9.0.0 src/gradle/wrapper/gradle-wrapper.properties 의 distributionUrl 로 확인 확인 방식 : GrpcPlatformStartupValidator 참조 15건 검색과 자동 설정이 만드는 빈 목록 대조 소스 수정 : x

재현 조건

원문은 analysis/grpc/grpc-spring-boot-starter.md#L183 에 있다.

본문

GrpcPlatformStartupValidator 를 이름으로 부르는 파일은 둘뿐이다 — 자기 자신과 자기 테스트.

검증기가 도는 데 빠진 것

:::evidence key="grpc-spring-boot-starter-f01-diagram" alt="설정 프로퍼티 셋만 검증기 입력 안에 놓이고 모듈 id 집합 생산자와 requireValid 호출 지점이 바깥에 빗금으로 놓인다" caption="검증기가 도는 데 빠진 것" zoom="false" :::

GrpcPlatformAutoConfiguration 은 빈 9개를 만들고 requireValid 를 부르지 않는다. 초기화 콜백도, @PostConstruct 도, ApplicationRunner 도 없다. 그래서 클래스 javadoc 이 약속한 성질이 성립하지 않는다 — "Refuses to start on a configuration that would be wrong in a way nobody would notice."

GrpcPlatformStartupValidator 참조 위치

:::evidence key="grpc-spring-boot-starter-f01" alt="코드베이스에서 GrpcPlatformStartupValidator 를 검색한 출력 15줄. 이 기록이 세는 참조가 그 출력에 그대로 보인다." caption="GrpcPlatformStartupValidator 코드베이스 검색 — 15줄 · exit 0" zoom="true" :::

함께 사라지는 설정 키 넷

transport — production 이 아닌 전송을 거부할 곳이 없다(게다가 자동 설정은 이 값을 보지 않고 GrpcServerProfile.stableNetty(...) 를 하드코딩한다, §17.2). tls-enabled · trust-all-certificates — 배포 환경의 TLS 바닥을 강제할 곳이 없다. operation-ledger-enabled — 멱등 키 필수 메서드가 원장 없이 열리는 것을 막을 곳이 없다.

정본이 저장소 안에 둘 있다

messaging 의 StartupProfileValidationInitializingBean.afterPropertiesSet 으로 돌려 그 문제를 이미 한 번 해결했고, fileserver 는 attestMapping() 을 app-bootstrap 의 @Bean 으로 연결했다. 반대로 같은 저장소가 이 형태를 두 번 기록했다 — WebPlatformStartupValidator 가 시작 시 실행되지 않고, BrokerAclManifest 의 시작 자기점검이 없다.

왜 배선되지 않았는지가 서명에 보인다

violations 는 넷을 받고 그중 셋에 생산자가 없다. 특히 마지막은 "스타터가 해석한 모듈 id 집합" 인데 그것을 실행 중에 산출하는 코드가 없다. P2.

확인하지 못한 것

스타터를 실제 애플리케이션에 올려 컨텍스트를 세우지 않았다. build-only 이고 이 스타터를 의존하는 모듈이 저장소에 없다.