Files
document-haness/docs/clean-architecture-backend-template/tech-log-studio/security-policy-enforcement/case/case-grpc-advanced-diagnostics-f02.md
T
DongHyeonkaandClaude Opus 5 b2963105a8 docs(keycloak-session-store): import the session-storage lab as a new project
The keycloak project ended with four open questions that design could not
settle. A two-VM lab was built to answer them by measurement, and this is
that material: 26 experiments, 125 raw command outputs, 22 browser captures.

Follows the import procedure in README.md.

  source/     the originating repository verbatim — 78 documents, 28 SVGs,
              8 manifests, plus .source-revision recording the commit
  final/      the SSOT
    document.md   729 lines written from the 29 experiment documents, not
                  concatenated: what was predicted, what was measured, and
                  where the measurement itself was wrong
    evidence/raw    125 outputs, flattened to <experiment>__<file> because
                    the originals collided (01-baseline.txt appeared three
                    times) and the audit only globs the top level
    evidence/meta   one per raw file; command and exitCode are null and the
                    README says why rather than inventing them
    evidence/browser  22 captures
    assets/       three diagrams through techviz
    .techviz/     their VizSpecs

A separate project rather than an addition to keycloak: the B-layer answers
that project's four questions, but the A, C and D layers are about cluster
failure, SSO and operations, and one document.md should hold one subject.
The four question records there can point here through 관계.

Recorded rather than papered over: only three of the 28 diagrams were
remade. The repository forbids hand-drawn SVG and forbids titles inside the
canvas; all 28 originals carry both, so converting them is redrawing, not
reformatting. They stay in source/ and the gap is written into the document.

verify-pipeline.py passes. audit-records.py reports no issues.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-09-04 22:51:59 +09:00

2.9 KiB

kind, slug, title, topic, project, status, sourceRevision, rootTreeNode, evidenceCapturedOn, assets, evidence, source, module, priority
kind slug title topic project status sourceRevision rootTreeNode evidenceCapturedOn assets evidence source module priority
CASE grpc-advanced-diagnostics-f02 금지 필드 검사가 키에만 적용되고 값에는 적용되지 않는다 security-policy-enforcement clean-architecture-backend-template 게시 전 21234e38cdb9a926cbc92bb97a2aee2e4a7d2916 case:grpc-advanced-diagnostics-f02 2026-09-01
key file
grpc-advanced-diagnostics-f02 ../../../final/evidence/rendered/grpc-advanced-diagnostics-f02.svg
../../../final/evidence/raw/grpc-advanced-diagnostics-f02.txt
원본 분석 절은 analysis/grpc/grpc-advanced-diagnostics.md#L206 이다.
grpc-advanced-diagnostics P3

금지 필드 검사가 키에만 적용되고 값에는 적용되지 않는다

redact(...) 도 같다 — 금지 이름의 키를 버리고, 남은 값은 주소 필드일 때만 마스킹한다. 값 자체가 자격증명 형태인지는 보지 않는다.

문제

redact(...) 도 같다 — 금지 이름의 키를 버리고, 남은 값은 주소 필드일 때만 마스킹한다.

값 자체가 자격증명 형태인지는 보지 않는다.

결론

grpc-observability 의 태그 정책은 값도 본다(UUID·sha256:·bearer 패턴).

같은 저장소의 두 관측 편집기가 값 검사에서 갈린다.

xDS 자원 버전은 보통 짧은 숫자나 해시라 도달성이 낮다.

기록하는 이유는 두 편집기의 규율이 다르다는 점이다.

검증 환경

OpenJDK : 21.0.12 java -version 으로 확인 Gradle : 9.0.0 src/gradle/wrapper/gradle-wrapper.properties 의 distributionUrl 로 확인 확인 방식 : redact 가 검사하는 대상(키)과 검사하지 않는 대상(값)의 코드 대조 소스 수정 : x

재현 조건

원문은 analysis/grpc/grpc-advanced-diagnostics.md#L206 에 있다.

본문

redact(...) 는 금지 이름의 키를 버리고, 남은 값은 주소 필드일 때만 마스킹한다. 값 자체가 자격증명 형태인지는 보지 않는다.

redact 가 보는 것

:::evidence key="grpc-advanced-diagnostics-f02" alt="분석 문서 analysis/grpc/grpc-advanced-diagnostics.md 에서 이 기록의 근거 절을 그대로 잘라낸 15줄. 코드베이스를 측정한 것이 아니라 원본 판정이 무엇을 적었는지를 보여 준다." caption="analysis/grpc/grpc-advanced-diagnostics.md 발췌 — 15줄" zoom="true" :::

같은 저장소의 다른 편집기는 값도 본다

grpc-observability 의 태그 정책은 UUID·sha256:·bearer 패턴을 본다. 두 관측 편집기가 값 검사에서 갈린다.

도달성은 낮다

xDS 자원 버전은 보통 짧은 숫자나 해시다. 기록하는 이유는 두 편집기의 규율이 다르다는 점이다.

확인하지 못한 것

자격증명 형태의 값을 실제로 넣어 통과를 관측하지 않았다. 배선 경로가 없어 실제 Channelz 스냅숏을 만들 수 없다.