Files
document-haness/docs/clean-architecture-backend-template/tech-log-studio/state-machines-and-ownership/concept/concept-adapter-outbound-objectstorage-c07.md
T
DongHyeonkaandClaude Opus 5 b2963105a8 docs(keycloak-session-store): import the session-storage lab as a new project
The keycloak project ended with four open questions that design could not
settle. A two-VM lab was built to answer them by measurement, and this is
that material: 26 experiments, 125 raw command outputs, 22 browser captures.

Follows the import procedure in README.md.

  source/     the originating repository verbatim — 78 documents, 28 SVGs,
              8 manifests, plus .source-revision recording the commit
  final/      the SSOT
    document.md   729 lines written from the 29 experiment documents, not
                  concatenated: what was predicted, what was measured, and
                  where the measurement itself was wrong
    evidence/raw    125 outputs, flattened to <experiment>__<file> because
                    the originals collided (01-baseline.txt appeared three
                    times) and the audit only globs the top level
    evidence/meta   one per raw file; command and exitCode are null and the
                    README says why rather than inventing them
    evidence/browser  22 captures
    assets/       three diagrams through techviz
    .techviz/     their VizSpecs

A separate project rather than an addition to keycloak: the B-layer answers
that project's four questions, but the A, C and D layers are about cluster
failure, SSO and operations, and one document.md should hold one subject.
The four question records there can point here through 관계.

Recorded rather than papered over: only three of the 28 diagrams were
remade. The repository forbids hand-drawn SVG and forbids titles inside the
canvas; all 28 originals carry both, so converting them is redrawing, not
reformatting. They stay in source/ and the gap is written into the document.

verify-pipeline.py passes. audit-records.py reports no issues.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-09-04 22:51:59 +09:00

3.0 KiB

kind, slug, title, topic, project, status, sourceRevision, rootTreeNode, evidenceCapturedOn, assets, evidence, source, module
kind slug title topic project status sourceRevision rootTreeNode evidenceCapturedOn assets evidence source module
CONCEPT adapter-outbound-objectstorage-c07 durable record가 비밀을 담지 않는다 state-machines-and-ownership clean-architecture-backend-template 게시 전 21234e38cdb9a926cbc92bb97a2aee2e4a7d2916 concept:adapter-outbound-objectstorage-c07 2026-09-01
key file
adapter-outbound-objectstorage-c07 ../../../final/evidence/rendered/adapter-outbound-objectstorage-c07.svg
../../../final/evidence/raw/adapter-outbound-objectstorage-c07.txt
원본 분석 절은 analysis/09-adapter-outbound-objectstorage.md#L420 이다.
adapter-outbound-objectstorage

durable record가 비밀을 담지 않는다

DirectTransferSessionRecord의 javadoc 한 줄이 이 sub-scope의 출발점이다 — "Durable non-secret direct-transfer session state; bearer material is deliberately absent."

본문

durable record가 비밀을 담지 않는다는 것이 출발점이다. DirectTransferSessionRecord의 한 줄 javadoc이 그것이다 — "Durable non-secret direct-transfer session state; bearer material is deliberately absent." 저장되는 것은 generation·제약 다이제스트·서명 시각·만료·credential revision·reference revision뿐이고, presigned URI와 서명 헤더는 process-local 캐시에만 남는다.

프로세스가 재시작하면 이미 발급된 grant는 재현되지 않고 "issued direct grant bearer material is unavailable after process restart"로 명시적으로 실패한다 — 조용히 새로 서명해서 두 번째 bearer를 만드는 대신이다.

DirectTransferSessionRecord 참조 위치

:::evidence key="adapter-outbound-objectstorage-c07" alt="코드베이스에서 DirectTransferSessionRecord 를 검색한 출력 10줄. 이 기록이 세는 참조가 그 출력에 그대로 보인다." caption="DirectTransferSessionRecord 코드베이스 검색 — 10줄 · exit 0" zoom="true" :::

CAS가 고정하는 순서

SESSION_RESERVED → GRANT_PREPARED → GRANT_ISSUED → DATA_UPLOADED이고, test 이름이 그 순서를 그대로 못박는다 — preparedCasPrecedesSigningAndIssuedCasPrecedesReturningTheBearerGrant. 서명 전에 prepared가 durable해야 하고, bearer를 반환하기 전에 issued가 durable해야 한다.

완료를 지평이 지날 때까지 거부한다

multipart 쪽에서 가장 흥미로운 것은 완료 시점의 admission drain이다. DirectMultipartCompletionVerifier.requireAdmissionDrained는 provider가 "controlled ingress가 비었다"고 권위 있게 말해 주지 않으면, 마지막 grant 만료 + 검증된 시계 오차 + 최대 in-flight 지평 이 지나기 전에는 완료를 거부한다. 이미 발급된 part PUT이 아직 날아가고 있을 수 있기 때문이다. test 이름이 completionHorizonRejectsWhileIssuedPartRequestsMayStillArrivelateGrantAdmissionRejectsAfterCompletionFence로 양방향 모두 고정한다.