Files
document-haness/docs/clean-architecture-backend-template/tech-log-studio/runtime-contract-correctness/case/case-grpc-spring-boot-starter-f04.md
T
DongHyeonkaandClaude Opus 5 b2963105a8 docs(keycloak-session-store): import the session-storage lab as a new project
The keycloak project ended with four open questions that design could not
settle. A two-VM lab was built to answer them by measurement, and this is
that material: 26 experiments, 125 raw command outputs, 22 browser captures.

Follows the import procedure in README.md.

  source/     the originating repository verbatim — 78 documents, 28 SVGs,
              8 manifests, plus .source-revision recording the commit
  final/      the SSOT
    document.md   729 lines written from the 29 experiment documents, not
                  concatenated: what was predicted, what was measured, and
                  where the measurement itself was wrong
    evidence/raw    125 outputs, flattened to <experiment>__<file> because
                    the originals collided (01-baseline.txt appeared three
                    times) and the audit only globs the top level
    evidence/meta   one per raw file; command and exitCode are null and the
                    README says why rather than inventing them
    evidence/browser  22 captures
    assets/       three diagrams through techviz
    .techviz/     their VizSpecs

A separate project rather than an addition to keycloak: the B-layer answers
that project's four questions, but the A, C and D layers are about cluster
failure, SSO and operations, and one document.md should hold one subject.
The four question records there can point here through 관계.

Recorded rather than papered over: only three of the 28 diagrams were
remade. The repository forbids hand-drawn SVG and forbids titles inside the
canvas; all 28 originals carry both, so converting them is redrawing, not
reformatting. They stay in source/ and the gap is written into the document.

verify-pipeline.py passes. audit-records.py reports no issues.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-09-04 22:51:59 +09:00

4.4 KiB

kind, slug, title, topic, project, status, sourceRevision, rootTreeNode, evidenceCapturedOn, assets, evidence, source, module, priority
kind slug title topic project status sourceRevision rootTreeNode evidenceCapturedOn assets evidence source module priority
CASE grpc-spring-boot-starter-f04 반사 모드를 명시하면 서비스·역할 허용 목록이 조용히 하드코딩으로 바뀐다 runtime-contract-correctness clean-architecture-backend-template 게시 전 21234e38cdb9a926cbc92bb97a2aee2e4a7d2916 case:grpc-spring-boot-starter-f04 2026-09-01
key file
grpc-spring-boot-starter-f04 ../../../final/evidence/rendered/grpc-spring-boot-starter-f04.svg
../../../final/evidence/raw/grpc-spring-boot-starter-f04.txt
원본 분석 절은 analysis/grpc/grpc-spring-boot-starter.md#L249 이다.
grpc-spring-boot-starter P3

반사 모드를 명시하면 서비스·역할 허용 목록이 조용히 하드코딩으로 바뀐다

두 갈래가 만드는 것이 같은 종류의 값이 아니다. 설정하지 않으면 defaultFor(environment) — 환경이 서비스 목록과 역할 목록을 함께 결정한다.

문제

두 갈래가 만드는 것이 같은 종류의 값이 아니다.

설정하지 않으면 defaultFor(environment) — 환경이 서비스 목록과 역할 목록을 함께 결정한다.

결론

설정하면 모드만 운영자 것이고, 허용 서비스와 허용 역할은 이 자동 설정에 박힌 리터럴이 된다.

운영자가 조정한다고 생각하는 것은 노출 수위 하나인데, 실제로는 노출 대상 집합까지 바뀐다.

그리고 그 두 리터럴은 설정 표면에 노출되어 있지 않으므로 되돌릴 방법이 reflection-mode 를 다시 비우는 것뿐이다.

ca-skeleton.grpc.platform 은 ignoreUnknownFields = false 를 걸어 "오타가 조용히 기본값으로 남지 않게" 한 설정 표면이다.

같은 규율로 보면, 값을 하나 설정했을 때 설정하지 않은 두 값이 함께 바뀌는 것도 같은 종류의 침묵이다.

허용 서비스·역할을 GrpcPlatformProperties 에 올리거나, 명시 모드에서도 defaultFor(environment) 가 만든 정책의 모드만 바꾼 사본을 쓴다.

후자가 이 저장소의 다른 곳에서 쓰는 형태다(GrpcProtoStyleManifest.allowingWellKnownTypes 처럼 넓힌 사본).

검증 환경

OpenJDK : 21.0.12 java -version 으로 확인 Gradle : 9.0.0 src/gradle/wrapper/gradle-wrapper.properties 의 distributionUrl 로 확인 확인 방식 : 반사 모드 설정 유무에 따른 두 갈래가 만드는 값의 종류 대조 소스 수정 : x

재현 조건

원문은 analysis/grpc/grpc-spring-boot-starter.md#L249 에 있다.

본문

두 갈래가 만드는 것이 같은 종류의 값이 아니다. 설정하지 않으면 defaultFor(environment) — 환경이 서비스 목록과 역할 목록을 함께 결정한다. 설정하면 모드만 운영자 것이고, 허용 서비스와 허용 역할은 이 자동 설정에 박힌 리터럴이 된다.

GrpcPlatformProperties 참조 위치

:::evidence key="grpc-spring-boot-starter-f04" alt="코드베이스에서 GrpcPlatformProperties 를 검색한 출력 19줄. 이 기록이 세는 참조가 그 출력에 그대로 보인다." caption="GrpcPlatformProperties 코드베이스 검색 — 19줄 · exit 0" zoom="true" :::

운영자가 조정한다고 생각하는 것과 실제로 바뀌는 것

조정한다고 생각하는 것은 노출 수위 하나인데, 실제로는 노출 대상 집합까지 바뀐다. 그리고 그 두 리터럴은 설정 표면에 노출되어 있지 않으므로 되돌릴 방법이 reflection-mode 를 다시 비우는 것뿐이다.

같은 규율로 보면 같은 종류의 침묵이다

ca-skeleton.grpc.platformignoreUnknownFields = false 를 걸어 "오타가 조용히 기본값으로 남지 않게" 한 설정 표면이다. 값을 하나 설정했을 때 설정하지 않은 두 값이 함께 바뀌는 것도 같은 종류다.

수정

허용 서비스·역할을 GrpcPlatformProperties 에 올리거나, 명시 모드에서도 defaultFor(environment) 가 만든 정책의 모드만 바꾼 사본을 쓴다. 후자가 이 저장소의 다른 곳에서 쓰는 형태다(GrpcProtoStyleManifest.allowingWellKnownTypes 처럼 넓힌 사본).

확인하지 못한 것

반사 모드를 명시한 컨텍스트를 세워 허용 목록의 변화를 관측하지 않았다. 두 갈래의 생성 코드로 판정했다.