The keycloak project ended with four open questions that design could not
settle. A two-VM lab was built to answer them by measurement, and this is
that material: 26 experiments, 125 raw command outputs, 22 browser captures.
Follows the import procedure in README.md.
source/ the originating repository verbatim — 78 documents, 28 SVGs,
8 manifests, plus .source-revision recording the commit
final/ the SSOT
document.md 729 lines written from the 29 experiment documents, not
concatenated: what was predicted, what was measured, and
where the measurement itself was wrong
evidence/raw 125 outputs, flattened to <experiment>__<file> because
the originals collided (01-baseline.txt appeared three
times) and the audit only globs the top level
evidence/meta one per raw file; command and exitCode are null and the
README says why rather than inventing them
evidence/browser 22 captures
assets/ three diagrams through techviz
.techviz/ their VizSpecs
A separate project rather than an addition to keycloak: the B-layer answers
that project's four questions, but the A, C and D layers are about cluster
failure, SSO and operations, and one document.md should hold one subject.
The four question records there can point here through 관계.
Recorded rather than papered over: only three of the 28 diagrams were
remade. The repository forbids hand-drawn SVG and forbids titles inside the
canvas; all 28 originals carry both, so converting them is redrawing, not
reformatting. They stay in source/ and the gap is written into the document.
verify-pipeline.py passes. audit-records.py reports no issues.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
16 lines
1.2 KiB
Plaintext
16 lines
1.2 KiB
Plaintext
### 20.3 P3 — 의미 지문이 길이 프레이밍 없이 구분자로 만들어진다
|
|
|
|
§19.4. 경로 변수 값과 헤더 값이 이스케이프 없이 구분자로 이어붙는다. 값 자체에 그 구분자가 들어가면(퍼센트 인코딩 `%1F`를 Spring이 디코딩해 `@PathVariable`로 전달한다) 서로 다른 두 요청이 같은 정규 문자열을 만들 수 있다 — 경로 변수가 둘 이상인 연산에서 하나를 통제하면 구성 가능하다.
|
|
|
|
악용 가치는 낮다. 멱등 레코드는 `principal` + `tenant`로 범위가 잡히므로 충돌시킬 수 있는 것은 **자기 자신의** 이전 요청뿐이고, 그것으로 얻는 것이 없다. 그리고 게이트 자체가 미조립이다(§20.1).
|
|
|
|
기록하는 이유는 일관성이다. 이 저장소는 다른 세 모듈에서 같은 문제를 길이 프레이밍으로 닫았고 그 이유를 명시했다. 여기서는 구분자를 골랐고 그 선택에 대한 근거가 없다. 값 앞에 길이를 붙이는 형태 하나면 닫힌다.
|
|
|
|
## 21. Sub-scope 05 완료 조건
|
|
|
|
- denominator 50 / 50 FULL_READ (probe가 `file_count=50` 확인)
|
|
- §8.1~§8.4 수행 — 도달성에서 P1 1건, 정규화에서 P3 1건, 기록 1건
|
|
- 소스 미변경
|
|
|
|
---
|