Files
document-haness/docs/clean-architecture-backend-template/tech-log-studio/contract-domain-and-bounds/reference/reference-messaging-inbox-jdbc-postgresql-f06.md
T
DongHyeonkaandClaude Opus 5 b2963105a8 docs(keycloak-session-store): import the session-storage lab as a new project
The keycloak project ended with four open questions that design could not
settle. A two-VM lab was built to answer them by measurement, and this is
that material: 26 experiments, 125 raw command outputs, 22 browser captures.

Follows the import procedure in README.md.

  source/     the originating repository verbatim — 78 documents, 28 SVGs,
              8 manifests, plus .source-revision recording the commit
  final/      the SSOT
    document.md   729 lines written from the 29 experiment documents, not
                  concatenated: what was predicted, what was measured, and
                  where the measurement itself was wrong
    evidence/raw    125 outputs, flattened to <experiment>__<file> because
                    the originals collided (01-baseline.txt appeared three
                    times) and the audit only globs the top level
    evidence/meta   one per raw file; command and exitCode are null and the
                    README says why rather than inventing them
    evidence/browser  22 captures
    assets/       three diagrams through techviz
    .techviz/     their VizSpecs

A separate project rather than an addition to keycloak: the B-layer answers
that project's four questions, but the A, C and D layers are about cluster
failure, SSO and operations, and one document.md should hold one subject.
The four question records there can point here through 관계.

Recorded rather than papered over: only three of the 28 diagrams were
remade. The repository forbids hand-drawn SVG and forbids titles inside the
canvas; all 28 originals carry both, so converting them is redrawing, not
reformatting. They stay in source/ and the gap is written into the document.

verify-pipeline.py passes. audit-records.py reports no issues.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-09-04 22:51:59 +09:00

2.4 KiB
Raw Blame History

kind, slug, title, topic, project, status, sourceRevision, rootTreeNode, verifiedOn, source
kind slug title topic project status sourceRevision rootTreeNode verifiedOn source
REFERENCE messaging-inbox-jdbc-postgresql-f06 같은 안전 규칙은 한 공식과 한 강제 시점을 갖는다 contract-domain-and-bounds clean-architecture-backend-template 게시 전 21234e38cdb9a926cbc92bb97a2aee2e4a7d2916 reference:messaging-inbox-jdbc-postgresql-f06
analysis/messaging/messaging-inbox-jdbc-postgresql.md#L693

같은 안전 규칙은 한 공식과 한 강제 시점을 갖는다

관계

  • bounded purge가 구현돼 있고 호출되지 않아, cleanup이 스스로 막겠다고 한 장애를 일으킨다 이 규칙의 근거는 같은 분석 리프의 판정이 소유한다.
  • 속성을 이름으로 주장하는 테스트가 그 속성을 보일 수 없는 fake 위에서 통과한다 이 규칙의 근거는 같은 분석 리프의 판정이 소유한다.
  • SQL 실패가 재시도 불가로 분류된다 이 규칙의 근거는 같은 분석 리프의 판정이 소유한다.

목적

같은 종류의 시간 관계가 곱셈과 덧셈으로 다르게 표현되고 강제 시점까지 다르면, 어느 배포가 그 규칙의 보호를 받는지 코드에서 읽을 수 없게 된다.

규칙

  1. 같은 규칙이 몇 곳에 있는지 센다 보존 규칙은 세 곳에 있다. InboxRepository javadoc 은 강제하지 않고, 이 leaf 의 InboxRetentionPolicy 는 × 2.0 이며, messaging-claim-check 의 ClaimCheckPolicy 는 brokerRetention + maxRedeliveryWindow 다.

  2. 공식이 같은지 본다 곱셈과 덧셈은 같은 안전 여유를 표현하지 않는다.

  3. 언제 강제되는지 본다 InboxRetentionPolicy.validate() 는 InboxCleanupJob 을 만들 때만 불린다. cleanup 을 배선하지 않은 배포는 보존 검사를 아예 받지 않는다. ClaimCheckPolicy 는 항상 강제한다.

적용 조건

보존 기간·재전달 창·타임아웃처럼 시간 관계를 안전 여유로 표현하는 정책이 여러 leaf 에 흩어져 있는 자리.

예외

leaf 마다 다른 여유가 필요한 경우는 공식이 아니라 계수가 달라야 한다. 지금은 계수가 아니라 연산 자체가 다르고, 그 차이의 이유가 어느 쪽에도 적혀 있지 않다.

예시

세 위치의 공식과 강제 시점. 확인 방법은 그 셋을 나란히 놓고 대조하는 것이다.