Files
document-haness/docs/clean-architecture-backend-template/tech-log-studio/identity-and-identifier/case/case-analysis-finding-a07-f005.md
T
DongHyeonkaandClaude Opus 5 b2963105a8 docs(keycloak-session-store): import the session-storage lab as a new project
The keycloak project ended with four open questions that design could not
settle. A two-VM lab was built to answer them by measurement, and this is
that material: 26 experiments, 125 raw command outputs, 22 browser captures.

Follows the import procedure in README.md.

  source/     the originating repository verbatim — 78 documents, 28 SVGs,
              8 manifests, plus .source-revision recording the commit
  final/      the SSOT
    document.md   729 lines written from the 29 experiment documents, not
                  concatenated: what was predicted, what was measured, and
                  where the measurement itself was wrong
    evidence/raw    125 outputs, flattened to <experiment>__<file> because
                    the originals collided (01-baseline.txt appeared three
                    times) and the audit only globs the top level
    evidence/meta   one per raw file; command and exitCode are null and the
                    README says why rather than inventing them
    evidence/browser  22 captures
    assets/       three diagrams through techviz
    .techviz/     their VizSpecs

A separate project rather than an addition to keycloak: the B-layer answers
that project's four questions, but the A, C and D layers are about cluster
failure, SSO and operations, and one document.md should hold one subject.
The four question records there can point here through 관계.

Recorded rather than papered over: only three of the 28 diagrams were
remade. The repository forbids hand-drawn SVG and forbids titles inside the
canvas; all 28 originals carry both, so converting them is redrawing, not
reformatting. They stay in source/ and the gap is written into the document.

verify-pipeline.py passes. audit-records.py reports no issues.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-09-04 22:51:59 +09:00

4.2 KiB

kind, slug, title, topic, project, status, sourceRevision, rootTreeNode, evidenceCapturedOn, body, assets, evidence, source
kind slug title topic project status sourceRevision rootTreeNode evidenceCapturedOn body assets evidence source
CASE analysis-finding-a07-f005 README의 세 가지 사실 오류 identity-and-identifier clean-architecture-backend-template 게시 전 21234e38cdb9a926cbc92bb97a2aee2e4a7d2916 case:analysis-finding-a07-f005 2026-09-01 case-analysis-finding-a07-f005.body.md
key file
analysis-finding-a07-f005 ../../../final/evidence/rendered/analysis-finding-a07-f005.svg
../../../final/evidence/raw/analysis-finding-a07-f005.txt
원본 분석 절은 analysis/07-adapter-outbound-identifier.md#L150 이다.

README의 세 가지 사실 오류

리프 README 의 세 서술이 각각 패키지 루트와 테스트 라이브러리 판본과 의존성 허용 경로에서 실제와 다르다. 셋 다 메커니즘 자체는 실재하고 동작한다. 틀린 것은 이름과 판본이다.

관계

  • 문서가 선언됐다는 둘은 없고, 선언된 하나는 그 문장에 없다 같은 리프의 다른 문서 오류다.
  • 사라진 가드가 문서에만 남았고 그 부재는 이미 승인된 결정이다 같은 계열이다.
  • 문서가 아니라 빌드 파일이 의존성의 진실이다 셋째 오류가 그 규칙의 형태다.

문제

리프 README 가 패키지 루트와 테스트 스택과 의존성 허용 경로를 적는다. 그 셋을 실제와 대조했다.

결론

세 서술이 모두 다르다.

패키지 루트는 어댑터 다음에 바로 리프 이름이 오는 형태로 적혀 있는데, 실제는 그 사이에 방향 구획이 하나 더 있다. 같은 저장소의 리프 지침 문서 쪽은 정확하다.

테스트 스택은 Spock 판본에 붙는 그루비 변형을 4 계열로 적는데, 실제 선언은 5 계열이다.

셋째가 가장 구조적이다.

README 는 이 리프의 프로젝트 간 의존성 간선이 루트 빌드 파일의 허용 맵으로 허용된다고 적고, 그 맵의 키를 방향 구획이 빠진 이름으로 든다.

실제 그 허용 맵은 리터럴 맵이 아니다. 레지스트리의 모듈 목록을 순회해 파생된다. 그리고 이 모듈의 키는 방향 구획이 들어간 이름이다.

즉 키 이름도 틀렸고 그 맵이 어디서 오는지도 틀렸다.

셋 다 메커니즘 자체는 실재하고 동작한다. 패키지는 있고 테스트는 돌고 간선은 허용된다. 틀린 것은 이름과 판본이다.

그래서 판정은 P3 다.

검증 환경

Gradle : 9.0.0 확인 방식 : README 와 소스 트리, 빌드 파일 대조 소스 수정 : x

재현 조건

원문은 final/evidence/raw/140 계열에 있다.

  1. README 의 패키지 루트 줄을 읽고 실제 소스 트리와 대조한다.
  2. 테스트 스택 줄을 읽고 빌드 파일의 선언과 대조한다.
  3. 의존성 허용 경로 줄을 읽는다.
  4. 루트 빌드 파일에서 허용 맵이 어떻게 만들어지는지 확인한다.
  5. 레지스트리에서 이 모듈의 키 이름을 확인한다.

본문

README에 세 가지 사실 오류가 있다.

README 실제
:3 패키지 루트 dev.caskeleton.adapter.identifier dev.caskeleton.adapter.outbound.identifier (CLAUDE.md:11은 정확)
:59 "Spock 2.4 / Groovy 4.0 variant" spock-core:2.4-groovy-**5.0**
:64 edge는 src/build.gradleallowedProjectDependencies['**adapter-identifier**']로 허용 build.gradle:1416allowedProjectDependencies는 리터럴 맵이 아니라 registry.modules.collectEntries { … }레지스트리에서 파생되며, 이 모듈의 키는 adapter-outbound-identifier

README 의 세 문장

:::evidence key="analysis-finding-a07-f005" alt="분석 문서 analysis/07-adapter-outbound-identifier.md 에서 이 기록의 근거 절을 그대로 잘라낸 15줄. 코드베이스를 측정한 것이 아니라 원본 판정이 무엇을 적었는지를 보여 준다." caption="analysis/07-adapter-outbound-identifier.md 발췌 — 15줄" zoom="true" :::

메커니즘은 실재하고 동작한다

틀린 것은 이름과 버전이다. P3.

확인하지 못한 것

README 의 서술이 언제부터 어긋났는지 확인하지 않았다.