Files
document-haness/docs/clean-architecture-backend-template/tech-log-studio/transport-and-provider-semantics/case/case-messaging-policy-f03.md
T
DongHyeonkaandClaude Opus 5 b2963105a8 docs(keycloak-session-store): import the session-storage lab as a new project
The keycloak project ended with four open questions that design could not
settle. A two-VM lab was built to answer them by measurement, and this is
that material: 26 experiments, 125 raw command outputs, 22 browser captures.

Follows the import procedure in README.md.

  source/     the originating repository verbatim — 78 documents, 28 SVGs,
              8 manifests, plus .source-revision recording the commit
  final/      the SSOT
    document.md   729 lines written from the 29 experiment documents, not
                  concatenated: what was predicted, what was measured, and
                  where the measurement itself was wrong
    evidence/raw    125 outputs, flattened to <experiment>__<file> because
                    the originals collided (01-baseline.txt appeared three
                    times) and the audit only globs the top level
    evidence/meta   one per raw file; command and exitCode are null and the
                    README says why rather than inventing them
    evidence/browser  22 captures
    assets/       three diagrams through techviz
    .techviz/     their VizSpecs

A separate project rather than an addition to keycloak: the B-layer answers
that project's four questions, but the A, C and D layers are about cluster
failure, SSO and operations, and one document.md should hold one subject.
The four question records there can point here through 관계.

Recorded rather than papered over: only three of the 28 diagrams were
remade. The repository forbids hand-drawn SVG and forbids titles inside the
canvas; all 28 originals carry both, so converting them is redrawing, not
reformatting. They stay in source/ and the gap is written into the document.

verify-pipeline.py passes. audit-records.py reports no issues.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-09-04 22:51:59 +09:00

3.8 KiB

kind, slug, title, topic, project, status, sourceRevision, rootTreeNode, evidenceCapturedOn, assets, evidence, source, module, priority
kind slug title topic project status sourceRevision rootTreeNode evidenceCapturedOn assets evidence source module priority
CASE messaging-policy-f03 재시도와 DLQ 각각에 두 개의 구현이 있고 정본이 표시되지 않았다 transport-and-provider-semantics clean-architecture-backend-template 게시 전 21234e38cdb9a926cbc92bb97a2aee2e4a7d2916 case:messaging-policy-f03 2026-09-01
key file
messaging-policy-f03 ../../../final/evidence/rendered/messaging-policy-f03.svg
../../../final/evidence/raw/messaging-policy-f03.txt
원본 분석 절은 analysis/messaging/messaging-policy.md#L799 이다.
messaging-policy P3

재시도와 DLQ 각각에 두 개의 구현이 있고 정본이 표시되지 않았다

재시도: DefaultRetryDecisionEngine(6모드·백오프·순서 인식) vs DefaultDeliveryProcessor(고정 지연·시도 횟수 미확인). DLQ: DeadLetterOrchestrator(예약 헤더 6개 부착) vs DefaultDeliveryProcessor.DeadLetterPublisher(헤더 없음).

관계

  • 구성 오류는 한 예외 타입과 안정 코드로 보고한다 같은 분석 리프에서 끌어낸 규칙이다.
  • 저장소 밖 문서를 절 번호로 인용하지 않는다 같은 분석 리프에서 끌어낸 규칙이다.
  • 부팅 경로의 알고리즘 복잡도는 문서화한다 같은 분석 리프에서 끌어낸 규칙이다.

문제

재시도: DefaultRetryDecisionEngine(6모드·백오프·순서 인식) vs DefaultDeliveryProcessor(고정 지연·시도 횟수 미확인).

DLQ: DeadLetterOrchestrator(예약 헤더 6개 부착) vs DefaultDeliveryProcessor.DeadLetterPublisher(헤더 없음).

결론

둘 다 조립되지 않았다.

오늘 경쟁하지 않지만, 소비 경로를 배선하는 사람이 둘 중 하나를 고르게 되고 코드가 어느 쪽이 정본인지 말하지 않는다.

두 javadoc이 각각 자기가 플랫폼 규칙의 구현이라고 서술한다.

그리고 선택 결과가 다르다 — DefaultDeliveryProcessor 경로로 DLQ된 메시지에는 실패 카테고리·코드·원본 목적지·시도 횟수가 붙지 않는다.

검증 환경

OpenJDK : 21.0.12 java -version 으로 확인 Gradle : 9.0.0 src/gradle/wrapper/gradle-wrapper.properties 의 distributionUrl 로 확인 확인 방식 : DefaultRetryDecisionEngine 참조 6건 검색과 두 구현의 javadoc·분기 대조 소스 수정 : x

재현 조건

원문은 analysis/messaging/messaging-policy.md#L799 에 있다.

본문

재시도와 DLQ 각각에 구현이 둘이다.

한쪽 다른쪽
재시도 DefaultRetryDecisionEngine(6모드·백오프·순서 인식) DefaultDeliveryProcessor(고정 지연·시도 횟수 미확인)
DLQ DeadLetterOrchestrator(예약 헤더 6개 부착) DefaultDeliveryProcessor.DeadLetterPublisher(헤더 없음)

DefaultRetryDecisionEngine 참조 위치

:::evidence key="messaging-policy-f03" alt="코드베이스에서 DefaultRetryDecisionEngine 를 검색한 출력 6줄. 이 기록이 세는 참조가 그 출력에 그대로 보인다." caption="DefaultRetryDecisionEngine 코드베이스 검색 — 6줄 · exit 0" zoom="true" :::

둘 다 조립되지 않았다

오늘 경쟁하지 않지만, 소비 경로를 배선하는 사람이 둘 중 하나를 고르게 되고 코드가 어느 쪽이 정본인지 말하지 않는다. 두 javadoc이 각각 자기가 플랫폼 규칙의 구현이라고 서술한다.

선택 결과가 다르다

DefaultDeliveryProcessor 경로로 DLQ된 메시지에는 실패 카테고리·코드·원본 목적지·시도 횟수가 붙지 않는다.

확인하지 못한 것

두 재시도 구현 중 어느 쪽이 정본인지 확인할 수 없었다. 소비 경로 배선 계획이라는 같은 미지수에 걸린다.