DongHyeonkaandClaude Opus 5
b2963105a8
The keycloak project ended with four open questions that design could not
settle. A two-VM lab was built to answer them by measurement, and this is
that material: 26 experiments, 125 raw command outputs, 22 browser captures.
Follows the import procedure in README.md.
source/ the originating repository verbatim — 78 documents, 28 SVGs,
8 manifests, plus .source-revision recording the commit
final/ the SSOT
document.md 729 lines written from the 29 experiment documents, not
concatenated: what was predicted, what was measured, and
where the measurement itself was wrong
evidence/raw 125 outputs, flattened to <experiment>__<file> because
the originals collided (01-baseline.txt appeared three
times) and the audit only globs the top level
evidence/meta one per raw file; command and exitCode are null and the
README says why rather than inventing them
evidence/browser 22 captures
assets/ three diagrams through techviz
.techviz/ their VizSpecs
A separate project rather than an addition to keycloak: the B-layer answers
that project's four questions, but the A, C and D layers are about cluster
failure, SSO and operations, and one document.md should hold one subject.
The four question records there can point here through 관계.
Recorded rather than papered over: only three of the 28 diagrams were
remade. The repository forbids hand-drawn SVG and forbids titles inside the
canvas; all 28 originals carry both, so converting them is redrawing, not
reformatting. They stay in source/ and the gap is written into the document.
verify-pipeline.py passes. audit-records.py reports no issues.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
14 lines
848 B
JSON
14 lines
848 B
JSON
{
|
|
"raw": "evidence/raw/a1-jgroups-transport-block__01-baseline-cluster.txt",
|
|
"experiment": "a1-jgroups-transport-block",
|
|
"executedAt": "2026-09-04T22:38:38+09:00",
|
|
"executedAtSource": "파일 mtime. 수집 시각의 근사치이며, 원문 머리말에 적힌 시각이 있으면 그쪽이 정확하다",
|
|
"revision": "cdac9b8178391311d8eca1ebc6cac15bb62d79af",
|
|
"command": null,
|
|
"commandNote": "이 파일 하나를 만든 단일 명령이 없다. 여러 명령의 출력을 모은 기록이며 명령 전문은 해설 문서의 「재현 절차」 절에 있다",
|
|
"cwd": "kc-lab-1 (k3s server) 또는 dev 머신 — 원문 머리말 참조",
|
|
"exitCode": null,
|
|
"sourceDoc": "../source/docs/experiment-a1-jgroups-transport-block.md",
|
|
"sha256": "0c97ab54dac7b62da1a295dbf9a556a4cdd68eb51f5b7ee791092ca2a412370f",
|
|
"bytes": 823
|
|
} |