DongHyeonkaandClaude Opus 5
b2963105a8
The keycloak project ended with four open questions that design could not
settle. A two-VM lab was built to answer them by measurement, and this is
that material: 26 experiments, 125 raw command outputs, 22 browser captures.
Follows the import procedure in README.md.
source/ the originating repository verbatim — 78 documents, 28 SVGs,
8 manifests, plus .source-revision recording the commit
final/ the SSOT
document.md 729 lines written from the 29 experiment documents, not
concatenated: what was predicted, what was measured, and
where the measurement itself was wrong
evidence/raw 125 outputs, flattened to <experiment>__<file> because
the originals collided (01-baseline.txt appeared three
times) and the audit only globs the top level
evidence/meta one per raw file; command and exitCode are null and the
README says why rather than inventing them
evidence/browser 22 captures
assets/ three diagrams through techviz
.techviz/ their VizSpecs
A separate project rather than an addition to keycloak: the B-layer answers
that project's four questions, but the A, C and D layers are about cluster
failure, SSO and operations, and one document.md should hold one subject.
The four question records there can point here through 관계.
Recorded rather than papered over: only three of the 28 diagrams were
remade. The repository forbids hand-drawn SVG and forbids titles inside the
canvas; all 28 originals carry both, so converting them is redrawing, not
reformatting. They stay in source/ and the gap is written into the document.
verify-pipeline.py passes. audit-records.py reports no issues.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
26 lines
1.2 KiB
Plaintext
26 lines
1.2 KiB
Plaintext
=== 양쪽 노드의 readiness — 둘 다 DOWN 이면 전면 장애다 ===
|
|
Traceback (most recent call last):
|
|
File "<string>", line 3, in <module>
|
|
d=json.load(sys.stdin)
|
|
File "/usr/lib/python3.14/json/__init__.py", line 298, in load
|
|
return loads(fp.read(),
|
|
cls=cls, object_hook=object_hook,
|
|
parse_float=parse_float, parse_int=parse_int,
|
|
parse_constant=parse_constant, object_pairs_hook=object_pairs_hook, **kw)
|
|
File "/usr/lib/python3.14/json/__init__.py", line 352, in loads
|
|
return _default_decoder.decode(s)
|
|
~~~~~~~~~~~~~~~~~~~~~~~^^^
|
|
File "/usr/lib/python3.14/json/decoder.py", line 348, in decode
|
|
raise JSONDecodeError("Extra data", s, end)
|
|
json.decoder.JSONDecodeError: Extra data: line 21 column 2 (char 446)
|
|
|
|
=== 파드 Ready 상태 ===
|
|
keycloak-0 false 0
|
|
keycloak-1 true 0
|
|
|
|
=== ★ Service 엔드포인트 — 트래픽을 받는 파드가 남아 있는가 ===
|
|
ready 주소: [10.42.0.35] notReady : [10.42.1.67]
|
|
=== ★ 외부 진입점으로 실제 로그인이 되는가 (nginx→Traefik→Service) ===
|
|
https://auth.hyeonworks.com/realms/master HTTP 200
|
|
토큰 발급 HTTP 200
|