pr / ci (pull_request) Successful in 3m37s
진단을 다시 돌리자(signing-check run 11) SIGNING_KEY가 바뀌어 있었다. 4,632글자 한 줄, base64로 읽으면 3,474바이트이고 그 첫 바이트가 `-`였다. 곧 armored 키 파일을 base64로 한 줄에 감싼 값이다(CI secret에 여러 줄 값을 넣을 때 흔히 쓰는 방법). Gradle의 useInMemoryPgpKeys는 armored 글만 읽어서 이 값도 「Could not read PGP secret key」로 실패한다. build-logic SigningKeys.armoured가 값을 받아, armored 블록을 base64로 감싼 것이면 풀어서 돌려준다. 그 밖의 값은 그대로 돌려줘 원래 오류로 실패하게 한다. 모듈 서명(LibraryPublishingPlugin)과 SBOM 서명(루트 build.gradle)이 이것을 거친다. check-signing-key.sh도 같은 규칙으로 풀어 본다. 「form: base64 of an armoured key file」을 알리고 풀린 글로 나머지를 검사한다. 키는 gpg에 환경 변수 대신 임시 폴더(0700, 끝나면 지움)의 파일로 넘긴다. 버린 대안: 소유자에게 여러 줄로 다시 넣게 하기. 지금 값도 키로는 맞을 수 있고, base64 한 줄은 secret 저장소가 여러 줄을 망가뜨릴 때의 표준 우회다. 검증(desktop, 버리는 RSA 4096 키): - SigningKeysTest: 클래스가 없어 컴파일 실패(RED) → 통과(GREEN) - check-signing-key.sh: armored·base64 둘 다 rc=0, base64 + 틀린 암호 rc=1, 지문 rc=1 - base64 키로 서명 리허설: rc=0, 서명된 artifact 10개, gpg --verify Good signature
159 lines
7.5 KiB
Bash
Executable File
159 lines
7.5 KiB
Bash
Executable File
#!/usr/bin/env bash
|
|
# Checks the release signing secrets before anything is signed, without printing them.
|
|
#
|
|
# scripts/release/check-signing-key.sh [expected fingerprint]
|
|
#
|
|
# Reads SIGNING_KEY (an ASCII-armoured PGP secret key) and SIGNING_PASSWORD from the environment and
|
|
# prints only shapes and verdicts: line and character counts, whether the armour lines and the blank
|
|
# line after BEGIN are where OpenPGP puts them, whether the base64 body decodes and its CRC24 matches,
|
|
# the first packet's tag, whether gpg imports it, the imported key's fingerprint (public), and whether
|
|
# SIGNING_PASSWORD signs with it. No value, line or fragment of either secret is ever printed; do not
|
|
# add `set -x` here.
|
|
#
|
|
# Why it exists: Gradle's signing reports any of these problems as one "Could not read PGP secret
|
|
# key", and the cause sits in a secret nobody can look at in the job log (v1.0.0 release run 9).
|
|
# Exit codes: 0 = the key would sign, 1 = a check failed (the line says which), 2 = usage.
|
|
set -euo pipefail
|
|
|
|
expected=${1:-}
|
|
fail=0
|
|
|
|
if [ -z "${SIGNING_KEY:-}" ]; then
|
|
echo "check-signing-key: SIGNING_KEY is empty or not set"
|
|
exit 1
|
|
fi
|
|
[ -n "${SIGNING_PASSWORD:-}" ] || echo "check-signing-key: SIGNING_PASSWORD is empty (only right for a key without a passphrase)"
|
|
|
|
home=$(mktemp -d)
|
|
trap 'rm -rf "$home"' EXIT
|
|
chmod 700 "$home"
|
|
KEY_OUT=$home/key.asc EXPECTED_FINGERPRINT=$expected python3 - <<'PY' || fail=1
|
|
import base64, os, re, sys
|
|
|
|
key = os.environ["SIGNING_KEY"]
|
|
BEGIN = "-----BEGIN PGP PRIVATE KEY BLOCK-----"
|
|
END = "-----END PGP PRIVATE KEY BLOCK-----"
|
|
problems = []
|
|
|
|
print(f"shape: {len(key)} characters, {key.count(chr(10)) + 1} lines,"
|
|
f" CR {'present' if chr(13) in key else 'absent'},"
|
|
f" literal backslash-n sequences {key.count(chr(92) + 'n')},"
|
|
f" non-ASCII characters {sum(1 for c in key if ord(c) > 127)},"
|
|
f" leading whitespace {'yes' if key[:1].isspace() else 'no'},"
|
|
f" trailing whitespace {'yes' if key[-1:].isspace() else 'no'}")
|
|
|
|
stripped = key.strip()
|
|
compact = re.sub(r"\s", "", key)
|
|
if "-----BEGIN" not in key and re.fullmatch(r"[A-Za-z0-9+/]+={0,2}", compact or "x"):
|
|
try:
|
|
unwrapped = base64.b64decode(compact).decode("utf-8")
|
|
except Exception:
|
|
unwrapped = ""
|
|
if unwrapped.strip().startswith("-----BEGIN PGP PRIVATE KEY BLOCK-----"):
|
|
print("form: base64 of an armoured key file on one value; the build unwraps it (SigningKeys), so the checks below read the unwrapped text")
|
|
key = unwrapped
|
|
stripped = key.strip()
|
|
print(f"unwrapped shape: {len(key)} characters, {key.count(chr(10)) + 1} lines")
|
|
|
|
if re.fullmatch(r"(0x)?[0-9A-Fa-f]{8}|(0x)?[0-9A-Fa-f]{16}|[0-9A-Fa-f]{40}", stripped):
|
|
expected = os.environ.get("EXPECTED_FINGERPRINT", "")
|
|
same = " (the release key's fingerprint)" if expected and stripped.upper() == expected.upper() else ""
|
|
print(f"PROBLEM: SIGNING_KEY holds a {len(stripped)}-hex-digit key ID or fingerprint{same}, not the key."
|
|
" Put in the output of `gpg --armor --export-secret-keys <fingerprint>` instead, BEGIN to END lines.")
|
|
sys.exit(1)
|
|
|
|
lines = key.replace("\r\n", "\n").replace("\r", "\n").split("\n")
|
|
while lines and lines[-1].strip() == "":
|
|
lines.pop()
|
|
if "\n" not in key.replace("\r", "\n"):
|
|
problems.append("the value is one line: the newlines were lost (paste the file as is, with its line breaks)")
|
|
first = lines[0].strip() if lines else ""
|
|
last = lines[-1].strip() if lines else ""
|
|
print(f"armour: first line is BEGIN {'yes' if first == BEGIN else 'no'}, last line is END {'yes' if last == END else 'no'}")
|
|
if first != BEGIN:
|
|
kind = "a PUBLIC key block" if "PUBLIC KEY BLOCK" in first else "something else"
|
|
problems.append(f"the value does not start with the BEGIN PGP PRIVATE KEY BLOCK line (it starts with {kind})")
|
|
if last != END:
|
|
problems.append("the value does not end with the END PGP PRIVATE KEY BLOCK line (cut short?)")
|
|
|
|
body = lines[1:-1] if first == BEGIN and last == END else lines
|
|
headers = []
|
|
while body and ":" in body[0] and body[0].strip():
|
|
headers.append(body.pop(0))
|
|
blank_after = bool(body) and body[0].strip() == ""
|
|
print(f"armour headers: {len(headers)}, blank line after them {'yes' if blank_after else 'no'}")
|
|
if not blank_after:
|
|
problems.append("no blank line between the BEGIN line (and its headers) and the base64 body")
|
|
data = [l.strip() for l in body if l.strip()]
|
|
checksum = data.pop() if data and data[-1].startswith("=") else None
|
|
lengths = [len(l) for l in data]
|
|
full = sum(1 for n in lengths[:-1] if n == lengths[0]) if lengths else 0
|
|
print(f"body: {len(data)} base64 lines, first {lengths[0] if lengths else 0} characters wide,"
|
|
f" {full + (1 if lengths else 0)} of {len(data)} lines that width or the last,"
|
|
f" checksum line {'present' if checksum else 'absent'}")
|
|
if lengths and any(n != lengths[0] for n in lengths[:-1]):
|
|
problems.append("base64 lines of different widths before the last one (lines joined, split or cut)")
|
|
joined = "".join(data)
|
|
bad = sum(1 for c in joined if not re.match(r"[A-Za-z0-9+/=]", c))
|
|
if bad:
|
|
problems.append(f"{bad} characters outside the base64 alphabet in the body")
|
|
try:
|
|
raw = base64.b64decode(joined, validate=False)
|
|
except Exception as error:
|
|
raw = b""
|
|
problems.append(f"the body does not decode as base64 ({type(error).__name__})")
|
|
if raw:
|
|
def crc24(data):
|
|
crc = 0xB704CE
|
|
for byte in data:
|
|
crc ^= byte << 16
|
|
for _ in range(8):
|
|
crc <<= 1
|
|
if crc & 0x1000000:
|
|
crc ^= 0x1864CFB
|
|
return crc & 0xFFFFFF
|
|
if checksum:
|
|
try:
|
|
stated = int.from_bytes(base64.b64decode(checksum[1:]), "big")
|
|
match = stated == crc24(raw)
|
|
except Exception:
|
|
match = False
|
|
print(f"CRC24 of the decoded body matches the checksum line: {'yes' if match else 'no'}")
|
|
if not match:
|
|
problems.append("the CRC24 checksum does not match: the base64 body was changed (a line lost, added or edited)")
|
|
header = raw[0]
|
|
tag = (header & 0x3F) if header & 0x40 else ((header & 0x3C) >> 2)
|
|
names = {5: "secret key", 6: "public key", 7: "secret subkey"}
|
|
print(f"first packet: tag {tag} ({names.get(tag, 'not a key packet')}), {len(raw)} bytes decoded")
|
|
if not header & 0x80 or tag != 5:
|
|
problems.append("the first packet is not a secret key packet (tag 5)")
|
|
|
|
for problem in problems:
|
|
print(f"PROBLEM: {problem}")
|
|
with open(os.environ["KEY_OUT"], "w", encoding="utf-8") as out:
|
|
out.write(key)
|
|
sys.exit(1 if problems else 0)
|
|
PY
|
|
|
|
if [ -s "$home/key.asc" ] && GNUPGHOME="$home" gpg --batch --quiet --import "$home/key.asc" >/dev/null 2>&1; then
|
|
fingerprint=$(GNUPGHOME="$home" gpg --batch --with-colons --list-secret-keys 2>/dev/null | awk -F: '/^fpr/{print $10; exit}')
|
|
echo "gpg import: ok, secret key fingerprint ${fingerprint:-none}"
|
|
if [ -n "$expected" ] && [ "${fingerprint:-}" != "$expected" ]; then
|
|
echo "PROBLEM: the imported key is not the release key ${expected}"
|
|
fail=1
|
|
fi
|
|
printf 'signing check\n' > "$home/message"
|
|
if printf '%s' "${SIGNING_PASSWORD:-}" | GNUPGHOME="$home" gpg --batch --pinentry-mode loopback \
|
|
--passphrase-fd 0 --local-user "${fingerprint:-none}" --detach-sign --output "$home/message.sig" \
|
|
"$home/message" >/dev/null 2>&1; then
|
|
echo "signing with SIGNING_PASSWORD: ok"
|
|
else
|
|
echo "PROBLEM: SIGNING_PASSWORD does not unlock the key for signing (wrong passphrase, or the key is not a signing key)"
|
|
fail=1
|
|
fi
|
|
else
|
|
echo "PROBLEM: gpg cannot import SIGNING_KEY"
|
|
fail=1
|
|
fi
|
|
exit "$fail"
|