지난 보고에서 P0·P1 단위로만 세고 리뷰 §26 완료 조건 대비로는 세지 않았다. 세어 보니
일곱이 빠져 있었다.
편집기에 맥락 패널이 없었다. 읽는 쪽은 맥락을 잃지 않게 해 놓고 쓰는 쪽은 잃게 두고
있었다 — 작성자는 지금 쓰는 글이 어느 프로젝트의 어느 주제에 속하고 무엇과 이어져
있는지를 기본 정보 칸까지 거슬러 올라가야만 볼 수 있었다.
대체 텍스트를 고칠 자리가 없었다. 업로드할 때 한 번 적고 끝이라 잘못 적은 것을 알아도
고칠 수 없었는데, 그 글은 그림을 못 보는 사람에게는 그림 자체다. 설명(caption)은 같은
그림을 기록마다 다르게 설명할 수 있으므로 자료가 아니라 본문이 갖는다.
자료를 종류와 쓰임으로 거른다. 종류는 계약이 주는 필터라 서버가 거르고, 쓰임은 계약에
없어 받아 온 목록에서 거른다 — 다음 쪽까지 세지 못한다는 사실을 화면에 적는다. 없는
필터를 있는 척하는 것이 가장 나쁘다.
작업본 목록에 「다음 할 일」 필터를 둔다. 작성자가 목록에서 실제로 묻는 것이 그것이다.
주제·관계 없음·자료 없음은 `DocumentSummary` 에 값이 없어 아직 못 한다.
레일에 앞뒤 단계를 붙인다. 맥락은 "어디에 속하는가"까지고, 길은 "어디에서 와서 어디로
가는가"다. 홈의 사슬에는 각 단계의 요약 첫 문장을 붙인다 — 무엇이 이어지는지만 적으면
목록이고, 왜 이어지는지를 적어야 길이 된다.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015c8cBFUaVr7KLVUx6ujz7D
Asset 상세는 이름과 사실 몇 줄뿐이었다. 목록의 썸네일은 "이게 그건가"를 가리는 데
쓰고, 상세에서는 실제로 무엇이 그려져 있는지 읽어야 한다 — 바꾸거나 지우기 전에
확인하는 자리다. 큰 그림을 싣고, 쓰이는 자료라면 지우기 전에 몇 개 기록이 깨지는지를
동작 옆에 못 박는다.
주제와 프로젝트 화면은 목록 둘뿐이라 여느 CMS 의 분류 관리와 같았다. 이 제품에서
값어치 있는 것은 그 둘의 관계다. 「구조」를 먼저 두고 프로젝트 → 주제 나무를 그린다.
답하는 질문이 비어 있는 주제와, 어느 프로젝트에도 걸리지 않은 주제를 함께 드러낸다 —
걸리지 않았다는 사실 자체가 구조의 상태이므로 숨기면 그 주제는 어느 화면에서도 보이지
않는다.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015c8cBFUaVr7KLVUx6ujz7D
Asset 목록이 `assetKey` 를 앞세우고 있었다. key 는 본문이 가리키는 불변 식별자이지
사람이 기억하는 이름이 아니다 — 스무 줄이면 해시 같은 문자열 스무 개에서 찾던 도식을
눈으로 골라야 했다. 파일 이름을 앞에 두고 형식·치수·크기를 함께 적는다. key 는 아래에
작게 남긴다(복사해 쓰는 값이라 지우지 않는다).
「사용 0건」과 「사용 3건」이 같은 회색으로 나란했다. 쓰이지 않는 자료는 지워도 되는
것이고 쓰이는 자료는 지우면 화면이 깨지므로, 그 차이를 말로 가른다. 상세에서는 어느
기록이 쓰는지를 링크로 연다 — 바꾸거나 지우기 전에 무엇이 깨질지 숫자만으로는 알 수
없다. 관리 상태도 `ARCHIVED` 대신 「보관됨」으로 적는다.
검증 결과는 오류와 경고가 한 목록에 섞여 있었다. 게시 전에 작성자가 알아야 하는 것은
"게시를 막는 것이 몇 개인가" 하나인데, 그 답을 얻으려면 줄마다 배지를 읽어야 했다.
둘을 갈라 각각의 수를 제목에 적는다.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015c8cBFUaVr7KLVUx6ujz7D
B1. 검증·미리보기 화면이 CSS 없이 배포됐다. `workflow.module.css` 를 import
하는 파일이 하나도 없었고, Vite 의 CSS Module 은 import 되어야 번들에 들어간다.
제목이 62px 가 아니라 16px 로 나왔고 미리보기의 링크 두 개가 공백 없이 붙었다.
규칙이 전부 `:global()` 이었으므로 모듈일 이유가 없다 — studio.css 로 옮겼다.
B2. Asset 라이브러리에 스타일이 없고 진입 경로도 없었다. 네 클래스에 규칙이
하나도 없어 key·상태·사용 수가 공백 없이 이어 붙었다. 스무 개짜리 목록에
썸네일도 없어 무엇을 고르는지 눌러 봐야 알았다. 내비게이션에도 없어서 URL 을
직접 쳐야 닿았다 — "정리하는 화면" 에 정리하러 갈 길이 없었다.
B3. 삭제에 확인이 없었다. 문서·주제·프로젝트·릴리즈·Asset 전부 한 번에 영구
삭제였고, 그 「삭제」가 행에서 시각적으로 가장 강한 요소였다(16px/600 빨강).
정작 그 행에서 해야 할 일인 「검증하기」는 13px/400 이었다. 확인 창을 하나
만들어 다섯 곳에 붙이고, 행의 우선순위를 되돌렸다.
B4(일부). robots.txt 가 광고하던 sitemap 이 404 였다. 무엇이 게시됐는지는
서버만 알므로 정적 파일이 아니라 조회로 만든다(백엔드 커밋 참조). robots.txt
가 그 주소를 가리키게 했다.
B5. 라우트 프리픽스 밖 URL 이 nginx 의 맨 `Not Found` 로 끝났다. 404 상태는
그대로 두고 — 크롤러에게 링크가 깨졌다고 말하는 것이 그것이다 — 본문만 앱을
주도록 `error_page 404 @not_found` 를 뒀다.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PTnWufiY9ATv57egkKKVAV
`StudioAssetGateway.listAssets` has always accepted `q`/`cursor` and
returned `nextCursor`, and this screen's own heading promises search
("업로드한 Asset을 검색하고..."). The component asked for `{ limit: 50 }`
and dropped `nextCursor`, so past the 51st asset older assets were
unmanageable with nothing on screen admitting anything was left out.
Follows `document-list.tsx`'s established shape: a `searchDraft`/`q`
pair so only a submitted query is an effect dependency (exactly one
request per deliberate search, never a trailing one), and a
`nextCursor`-driven control that appends rather than replaces.
Two things the pattern did not already cover:
- `RequestOptions.signal` is advisory, so aborting is not enough to stop
an abandoned response from painting over a newer one. An `active` flag
that flips synchronously on dependency change closes that race.
- "더 보기" unmounts exactly when the last page arrives, which would
strand focus on `<body>`. Focus moves to the first appended row
unconditionally, falling back to the page heading -- the same anchor
the delete path already uses.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Fix round 1 for the Task 11 asset library review. I1 (Important): a
successful delete removed the row from state, so remove()'s reuse of
closeDetail() queued .focus() on a now-detached button -- a silent
no-op that stranded focus on <body>. Splits closeDetail() (cancel/close,
row still on screen, restores focus to the trigger) from a new
closeDetailAfterRemoval() (post-delete, focuses the page heading, the
one anchor guaranteed to survive any list change) so the two paths
stop sharing a helper that only one of them can safely use.
Also closes four Minors from the same review round:
- route-contract.test.ts's "27-route inventory" test title corrected
to 28.
- canHardDelete's usageCount clause gets its own isolating assertion
(every prior case used usageCount: 0, so that clause was never
independently falsified).
- Dropped a duplicate role="status" announcement on a listAssets
load failure; the existing role="alert" paragraph is now the sole
announcement.
- Added success-path tests for archive() and remove() via a new
recordingGateway() test helper that pins the exact gateway call
shape (expectedVersion, managementStatus: ARCHIVED, idempotency
keys), not just the resulting UI text; the delete-success test also
pins the I1 focus fix so a regression back to the removed trigger
fails loudly.
See task-11-report.md's "Fix round 1" section for the RED/GREEN
evidence (the pre-fix code reliably crashes the test worker rather
than failing the assertion cleanly -- explained there) and the
correction to this task's original claim about matching
publication-list.tsx's focus pattern.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Adds TECH_LOG_STUDIO_ASSETS (/studio/assets) as a route reachable but
excluded from primary Studio navigation (navigationLabel/navigationOrder
null), plus the AssetLibrary screen that lists assets, shows usage, and
lets an operator archive or hard-delete one. canHardDelete() is a pure
gate mirroring the server's ASSET_IN_USE rule so the screen never offers
an action the server would refuse.
Adding a 28th route also required updating the route-scoped CI
accessibility-evidence gate (FE-GATE-009 in config/ci/gates.json, plus
its authority-baseline counts and shape digest in
scripts/contracts/ci-gates.ts) and the Vite route-to-chunk map that
scripts/generate-build-manifest.ts depends on, or test:unit and the
production build both fail. See task-11-report.md for the full
breakdown.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>