DongHyeonka 3c31576940 test(contracts): V2 행과 V3 descriptor를 양방향과 스키마 id까지 맞춰 본다 (07-02)
문제
HTTP API 하나를 V2 행(check:registries가 보는 선언)과 V3 descriptor(실제로
실행되는 사본)에 두 번 쓴다. 15-01 뒤에도 둘은 feature-runtime.ts의
apiContract와 contractContributions로 나뉘어 그대로 두 벌이다. 둘을 잇는
parity 테스트는 V2 행에서 V3를 찾는 한 방향이고 6필드만 비교한다. 그래서
V3 검증기의 schemaId를 바꾸거나(L1) V3에만 API를 추가해도(L6) 테스트가
통과한다. V3에만 있는 API는 공개 경로·메서드가 FE-REG-API 게이트 밖에서
실행된다. "V2는 게이트용, V3는 실행용"이라는 사실은 테스트 주석에만 있다.

고른 방법 (리뷰 5.1절의 B, 1단계)
- 두 사본의 operation id 집합이 같아야 한다(양방향). V3만 있는 API와
  V2만 있는 API가 각각 실패한다.
- 비교 필드에 같은 사실의 사본 넷을 더했다: 쓰기 여부(V2 semantics ↔ V3
  commandEffect 유무, 실행기가 쓰기를 메서드가 아니라 effect로 정하므로),
  요청 본문(V2 requestSource body ↔ V3 requestBody JSON), 입력 스키마 id
  (V2 pathSchema/requestSchema 중 NoRequest가 아닌 것 ↔ V3 inputValidator),
  응답 스키마 id(V2 responseSchema ↔ V3 outputValidator).
- V2가 path와 request 스키마를 둘 다 가진 operation은 V3 입력 스키마 하나와
  대응 규칙이 아직 없다. 조용히 넘기지 않고 테스트가 실패하며 규칙을
  정하라고 알린다. 지금 설치된 operation에는 없다.
- RestOperationV2 위와 starter-experience.md "Adding a feature"에 V2는
  게이트용 선언, V3는 실행 사본이고 둘 다 쓴다는 것을 적었다.

버린 대안
- V2 행을 V3에서 생성(5.1절 C)하거나 FE-REG-API 스냅샷을 V3에서 투영하고
  V2 행을 없애기(D): 생성기·투영 함수와 기준선 재승인이 필요한 구조
  변경이라 이번 범위를 넘는다. 15-01로 V2와 V3가 같은
  defineFeatureRuntime 객체에 모였으므로 D로 갈 때 기능 단위 투영 지점은
  생겼다.
- "V2 행이 1개 이상" 단언: test:sample-removal이 참조 기능을 지운 사본에서
  이 파일을 돌리면 두 집합이 모두 비어 정상인데 실패한다. 양방향 집합
  비교가 한쪽만 빈 경우를 잡는다.
- 두 번째 기능 테스트(second-api-feature-registries)에 V3 기여 넣기:
  fixture 복사본에서 check:registries를 도는 테스트라 V3 기여를 넣어도 이
  parity 검사가 그 사본에서 돌지 않는다. 비용 대비 효과가 작아 뺐다.

위험·한계
- 시간 제한(V2 timeoutMs null ↔ V3 totalDeadlineMs 10000, L3)은 비교하지
  않는다. 맞추려면 V2 행 값을 바꿔야 하고 FE-REG-API 기준선이 바뀐다.
  주석에 비교하지 않는다고 적었다.
- 응답 스키마 본문, unknownFieldPolicy ↔ zod strip/strict(L7), 손 guard ↔
  zod DTO 차이는 여전히 대조하지 않는다.
- 설치된 기능에 대한 테스트다. CI 밖에서 V3만 추가한 다운스트림은 이
  파일을 돌려야 걸린다.

검증
- RED: 기존 테스트와 새 테스트를 같은 변이에 돌렸다.
  L1(V3 GET_REFERENCE_RESOURCE outputValidator schemaId를
  ReferenceResourcePayloadV2로): 기존 통과, 새 테스트 실패
  ("responseSchema": "ReferenceResourcePayload" vs "...V2").
  L6(V3에만 GET_REFERENCE_RESOURCE_V3_ONLY 추가): 기존 통과, 새 테스트
  "cover the same operations" 실패(+ "GET_REFERENCE_RESOURCE_V3_ONLY").
- GREEN: 변이 없이 2/2 통과.
- 회귀: tsc test rc=0, 바꾼 파일 eslint rc=0. 전체 회귀는 다음 커밋들과
  함께 마지막에 돌렸다(이 커밋의 src 변경은 주석뿐).

Refs: docs/reviews/2026-11-01-maturity-review/07-contracts.md
2026-11-01 22:35:54 +09:00

Clean Architecture Frontend Template

A React/Vite reference implementation where architecture boundaries, integration behavior, release coherence, accessibility, performance, and operations are executable contracts rather than conventions.

Start locally

Requirements: the exact Node.js version in .nvmrc (currently 24.14.0) and Corepack. The repository pins pnpm in package.json.

Product source, tests, build/quality scripts, and supported tool configuration are TypeScript/TSX. allowJs is disabled. Node-side .ts scripts run directly on the pinned Node 24 runtime and are checked with NodeNext resolution plus erasable-syntax enforcement. Project-owned executable source contains no JavaScript-family files; negative architecture, security, and type-compatibility fixtures are TypeScript/TSX as well.

corepack pnpm install --frozen-lockfile
corepack pnpm dev

Runtime configuration

Runtime-public settings are validated against one schema before the product tree mounts (runtimeConfigV2ArtifactSchema in src/contracts/release-artifacts.ts). Client secrets are forbidden.

The source of truth is config/runtime/<profile>.json, one file per environment: local, development, staging, production. corepack pnpm build writes dist/config.json from the selected profile (scripts/generate-runtime-config.ts). public/config.json is only the local profile for corepack pnpm dev; the build replaces it, so settings put there never reach a deployment. Keep it equal to config/runtime/local.json plus BUILD_ID: local-build and RELEASE_ID: local-release; tests/unit/deployment-admission.test.ts fails when the two differ.

Build and deploy variables, lowest precedence first:

Variable Sets Default
APP_PROFILE which config/runtime/<profile>.json is used local; an empty value fails the build
RUNTIME_API_BASE_URL API_BASE_URL, overriding the profile the profile value
RUNTIME_TELEMETRY_ENDPOINT TELEMETRY_ENDPOINT, overriding the profile the profile value
VITE_BUILD_ID BUILD_ID in the runtime config and the release manifest local-build
RELEASE_ID RELEASE_ID in the runtime config and the release manifest local-release
RELEASE_TARGET the environment FE-GATE-027 admits the build to; must equal APP_PROFILE none; admission refuses without it

verify:documentation fails if this table stops naming a variable the build or admission reads (scripts/verify-documentation-readiness.ts).

Only the two RUNTIME_* values can differ from the reviewed profile. Anything else changes by editing the profile file. Staging and production reject demo auth and non-HTTPS endpoints.

A production build and its admission check:

APP_PROFILE=production \
RUNTIME_API_BASE_URL=https://api.example.com/ \
RUNTIME_TELEMETRY_ENDPOINT=https://telemetry.example.com/v1/events \
VITE_BUILD_ID=<unique build id> RELEASE_ID=<unique release id> \
corepack pnpm build
APP_PROFILE=production RELEASE_TARGET=production corepack pnpm check:release-admission

With CI=true the gate runner (corepack pnpm ci:gate) also requires VITE_COMMIT_SHA, SOURCE_DATE_EPOCH and CI_RUNNER_IMAGE before it runs a gate (scripts/lib/build-environment.ts, scripts/run-ci-gate.ts). The CI variable list is in docs/operations/ci-quality-gates.md.

Included starter experience

The default build mounts a domain-neutral application shell with a header, responsive sidebar, route focus management, session integration status, and a persistent system / light / dark theme selector.

Route Purpose
/ implementation readiness and starter links
/examples/ui buttons, fields, cards, alerts, badges, modal, and tokens
/examples/states loading, refresh, empty, error, auth, forbidden, and not-found states
/examples/auth reactive external-auth integration seam
/examples/reference-resources removable, session-required reference feature

AUTH_MODE=demo is credential-free and accepted only in local/development environments. Deployments use AUTH_MODE=external and provide the opaque auth owner described in docs/architecture/starter-experience.md. The client route policy is user experience only; server authorization remains authoritative.

Support scope

Four tiers. The status words on the right are the ones the catalogs and design documents use; the next table maps them.

Tier What it covers Status words
Default In the default build and covered by the merge gates: the application shell and example routes, the REST HTTP executor, TanStack Query server state, Local/Session Storage registries, cross-tab invalidation, runtime config profiles and the release manifest check, AUTH_MODE=external (demo only in local/development), the typed message catalog, and the removable reference feature. dist/ is served by a static host (docs/architecture/static-delivery.md) COMPOSED
Optional (recipe) Not installed. A project copies one of the recipes in config/recipes/frontend-capability-recipes.json and narrows it (docs/architecture/optional-adapter-recipes.md). realtime, offline-indexeddb, service-worker-pwa and file-transfer also ship a tested reference runtime that the default build leaves out RECIPE_AVAILABLE, NOT_INSTALLED, AVAILABLE_NOT_COMPOSED
Experimental Designed and decided, but the runtime is missing or unfinished; finish it before building on it. GraphQL, gRPC-Web, Connect-Web and Protobuf adapters, Range resumable download, IndexedDB query persistence, the local preview decode-safety probe. src/features/local-draft-feature is an architecture sample, not installed DESIGNED_NOT_IMPLEMENTED
Not supported Deliberately not selected, or browsers cannot guarantee it: SSR, app-managed background upload and download, directory selection, persistent file handles, product query persistence, exactly-once delivery between tabs NOT_SELECTED, PLATFORM_LIMITED

The rows come from docs/architecture/browser-data-capability-completion-ledger.md, docs/architecture/client-cache-and-storage.md and docs/architecture/api-contract-schema-mapper-and-server-state.md.

Status word Where it appears Meaning Tier
COMPOSED capability ledger, design documents wired into the default production path Default
INSTALLED a project's own recipe catalog (step 10 of the recipe procedure) the project added the recipe Default, for that project
RECIPE_AVAILABLE recipe catalog status a recipe exists to copy; nothing is installed Optional
NOT_INSTALLED recipe catalog defaultStatus; a src/features/<id>/NOT_INSTALLED marker file not part of the build Optional (recipe) or Experimental (feature)
AVAILABLE_NOT_COMPOSED capability ledger; recipe referenceRuntime.status code and tests exist; the default build leaves it out Optional
DESIGNED_NOT_IMPLEMENTED capability ledger, design documents design approved, runtime missing Experimental
NOT_SELECTED capability ledger, design documents deliberately not chosen Not supported
PLATFORM_LIMITED capability ledger browsers cannot guarantee it; offered only behind a probe and a fallback, if at all Not supported as a guarantee

Gate results (PASS, PASS_SCOPED, UNVERIFIED, FAIL_UNVERIFIED) are verdicts on evidence, not support tiers.

Browsers: the build targets Chrome and Edge 111, Firefox 128, and Safari and iOS 16.4. That is the higher of Vite 8's default JavaScript target (baseline-widely-available; vite.config.ts sets no build.target) and the CSS targets of Tailwind CSS 4. There is no browserslist. The end-to-end suite runs on the desktop Chromium, Firefox and WebKit builds that Playwright 1.62 pins, plus one Chromium phone-size smoke (playwright.config.ts). Older versions inside the target range and real mobile browsers are not tested.

Architecture

This repository is a Frontend Application Foundation: a starter/composition skeleton plus a reusable capability platform. Platform capabilities stay horizontal while product business features use vertical slices.

Dependencies point inward:

presentation -> application -> domain
adapters -----^
bootstrap composes concrete adapters
feature use case -> feature port <- feature-owned capability binding

See docs/architecture/frontend-application-foundation.md, docs/architecture/overview.md, docs/architecture/layers.md, and docs/architecture/starter-experience.md. The removable vertical slice is under src/features/reference-feature; its domain, application input, HTTP binding, contracts, route runtime, and presentation own their contributions. The central installed catalogs only aggregate selected contributions. The generic starter routes continue to typecheck, test, and build after that feature is removed.

Platform capability review

The starter shell is implemented, but the repository review also records the remaining work required before feature teams can use every declared contract through one end-to-end application path:

These documents distinguish repository defaults from opt-in adapters and project-owned integrations. They are target designs and review findings; a capability is not treated as implemented until its branch acceptance criteria and executable gates pass.

Documentation

docs/README.md sorts the documents into current contracts, target designs and work history.

Files you can delete after copying

These record how the template was built. Nothing in the build or the gates reads them, except the one file noted below (tests/unit/deletable-history-documents.test.ts checks this).

Path Contents
docs/superpowers/ past plans and specs
docs/reviews/ reviews and the review guide. Keep docs/reviews/adapters/INVENTORY.md: check:adapter-inventory (FE-GATE-010) reads it
SPEC.md, tasks/ requirements and task list of the 2026-09-25 review fix round
CLAUDE.md review instructions for the template repository itself; replace it with your own
PRODUCT.md product context of the template itself (users, purpose, principles) for design tools; replace it with your product's

The reference feature is not in this list: deleting its directory alone leaves tests, policy entries and CI scripts behind that fail the gates. scripts/test-sample-removal.ts removes it from a copy of the repository and lists everything that has to go with it (its header comment and SAMPLE_EXTRAS); do the same in your project and run the gates.

Verification

Common local checks:

corepack pnpm lint
corepack pnpm check:types
corepack pnpm check:types:app
corepack pnpm check:types:node
corepack pnpm check:types:test
corepack pnpm check:architecture
corepack pnpm test:all
corepack pnpm test:contract
corepack pnpm test:e2e
corepack pnpm test:a11y
corepack pnpm build
corepack pnpm check:bundle
corepack pnpm test:performance
corepack pnpm verify:compatibility
corepack pnpm verify:release
corepack pnpm check:registries
corepack pnpm drill:runbooks
corepack pnpm check:ci

drill:runbooks stops at the first drill that is not PASS. Without provider evidence every drill ends UNVERIFIED (exit 3), because a drill never reports a check it could not run locally as PASS; see "Runbook jobs" in docs/operations/ci-quality-gates.md.

test:all is the ordinary product-development loop and intentionally excludes host-level CI-runner assurance. Run corepack pnpm test:system only on the compatible Linux assurance host described in docs/testing/taxonomy.md.

check:types는 source, Node scripts/config와 tests를 분리된 TypeScript project로 모두 검사한다. type/architecture/security/registry의 invalid fixture는 config/ci/gates.json에서 “실패해야 통과”하는 negative gate로 실행된다. 도구 호환성 결정은 VD-01에 기록돼 있다.

Application feature input은 module augmentation으로 닫힌 ID와 정확한 input shape를 제공하며, 공통 Result<Value, Failure = AppFailure>는 error registry의 failure kind만 application/presentation 경계를 통과시킨다. Architecture gate는 TypeScript/TSX의 static, dynamic, type import를 별도 정적 그래프로 분석하고 runtime/source 영역의 JavaScript 재유입도 거절한다. 해석되지 않은 import, parse failure, 금지 계층 edge와 순환 의존은 모두 fail-closed이며 전용 TypeScript/TSX negative fixture로도 검증된다.

Install the pinned Playwright browser engines before the first cross-browser run:

corepack pnpm exec playwright install --with-deps chromium firefox webkit

Two gates intentionally need external evidence:

  • review:a11y-manual (release gate FE-GATE-028) needs a signed human keyboard/focus/screen-reader review for all ten registered routes: APP_HOME, EXAMPLES_PLATFORM, EXAMPLES_UI, EXAMPLES_STATES, EXAMPLES_AUTH, NOT_FOUND, REFERENCE_RESOURCE_LIST, REFERENCE_RESOURCE_DETAIL, REFERENCE_RESOURCE_FORM and REFERENCE_RESOURCE_STATUS. verify:documentation derives that list from the route registry and fails if this paragraph falls behind it. The merge gate FE-GATE-009 runs only review:a11y-manual -- --format-only, which checks that every route record keeps the template's fields, reviewed or still pending.
  • collect:web-vitals-evidence stays FAIL_UNVERIFIED until a reviewed minimum eligible-sample threshold and 28 days of production data exist.

Live hosting verification (FE-GATE-019, production stage) requires HOSTING_BASE_URL and a deployed promoted release; without it the result is UNVERIFIED, not PASS.

CI and evidence

The gate registry is config/ci/gates.json; the Gitea workflow is .gitea/workflows/quality-gates.yml. It follows:

MERGE_READY -> RELEASE_READY -> PROD_PROMOTION_READY -> FIELD_SLO_READY

DOCUMENTATION_READY is independent. No gate is downgraded to a warning.

The workflow runs on pull requests, pushes to main and develop, and v* tags. The Git host of this repository may not have Actions enabled, so a pull request can show no gate status at all; no status is not a pass. Until the host runs the workflow and marks the merge gates as required checks, run the 13 merge gates locally before merging (FE-GATE-008 and 009 need Playwright browsers):

for gate in 001 002 003 004 005 006 007 008 009 010 011 013 020; do
  corepack pnpm ci:gate -- "FE-GATE-$gate" || break
done

Machine-readable evidence is written below artifacts/; generated evidence is ignored by Git while .gitkeep files preserve the taxonomy.

Operational details are in docs/operations/, with incident procedures in docs/runbooks/.

Updating a copied project

Template versions are Git tags vX.Y.Z. CHANGELOG.md lists the changes between tags, marks security fixes [보안] and contract changes [계약] (backend, deployment, CI or feature code must change too), and names the affected paths.

Record where you started. Right after copying, commit a one-line .template-origin file at the root of your project with the template tag (or commit) you copied and the date, for example v0.2.0 2026-09-26.

Take a template fix with Git. cherry-pick works even when your repository does not share the template's history, because it merges against the picked commit's parent:

git remote add template <template repository URL>
git fetch template --tags
git log --oneline <your origin>..template/main   # what changed since you copied
git cherry-pick -x <commit>                      # one fix; -x records its origin

When the files have moved or diverged too far for a clean pick, read the change as a diff and apply it by hand:

git diff <commit>^ <commit> -- <paths from CHANGELOG>

Afterwards run the local merge gates from "CI and evidence", apply the backend or deployment change a [계약] row names, and update .template-origin once you have caught up to a tag. git revert undoes a pick.

Defects: if a problem reproduces on an unmodified checkout of your .template-origin commit, it is a template defect. Report it on the template repository with that commit and the reproduction; the template maintainer classifies it and ships the fix with a CHANGELOG entry. A problem that needs your changes to reproduce belongs to your project, and applying a template fix to your copy is your project's job.

S
Description
No description provided
Readme
20 MiB
Languages
TypeScript 98.2%
Python 1%
CSS 0.5%
Shell 0.3%