DongHyeonka 5d064b8ace test(features): 기능을 더해도 기능 밖 테스트와 시나리오 하네스가 깨지지 않게 한다 (16-02)
문제: 기능 하나를 더하면(리뷰 16 실험 E) 기능 밖 테스트 3개가 깨진다.
① installed-context-routing은 context 목록이 정확히
["reference-context"]이고 첫 context가 참조 context라고 단정한다.
② product-feature-switch는 정렬 첫 기능(INSTALLED_PRODUCT_FEATURE_IDS[0])을
끄고 참조 라우트를 본다. 새 기능이 앞에 정렬되면 깨진다.
③ release-manifest fixture가 contractSet.packages: []로 고정이다.
EXTERNAL_PACKAGE를 쓰는 첫 기능에서 반드시 깨진다.
또 시나리오 하네스의 operation ID 타입이 테스트 계약 3개 리터럴이고
시나리오 응답 함수가 /api/test-entities 핸들러 안에 묶여 있다. 새 기능
테스트가 자기 operation에 실패 시나리오를 쓰려면 카탈로그를 고쳐야 한다
(안 고치면 TS2345, 실행하면 catalog.ts:469 TypeError).

방법: 리뷰의 (b) 최소 개선.
① "목록에 reference-context가 있다"로 바꾸고, 라우트 검사는 id로 찾은
  context에서 한다.
② REFERENCE_FEATURE_ID를 쓴다.
③ fixture의 packages와 setDigest를 EXPECTED_CONTRACT_SET_PACKAGES에서
  만든다.
하네스: HttpScenarioOperationId를 string으로 넓혔다. 시나리오 사실(명령
여부, 응답 상한, 성공 status)은 httpScenarioOperationFacts가 설치된 V3
descriptor에서 읽는다. 시나리오 응답은 tests/mocks/handlers/
http-scenarios.ts의 createHttpScenarioHandler로 옮겼다. 경로와 method도
descriptor에서 만든다. test-entities 핸들러는 이 함수를 쓰고 카탈로그
확인(assertOperationScenario)을 그대로 거친다. 카탈로그 기대값 57개는
계속 테스트 계약 3개에만 있고, 그 타입도 3개로 둔다. 카탈로그에 없는
operation을 assertOperationScenario에 넘기면 TypeError 대신 그 사실을
말하는 오류가 난다. test-entities 핸들러는 요청의 이름·id를 되돌려 주던
응답을 카탈로그 payload로 고정했다(기대값과 같은 값이다).
새 기능 테스트의 MSW 시나리오: server.use(createHttpScenarioHandler(
<자기 설치 계약>, { scenario: "server-terminal-503", payload }))
버린 대안: (a) 현상 유지는 기능마다 4곳을 고친다. (c) 하네스를 기능별로
나누면 변경이 크고 test-evidence.json의 증거 경로가 바뀐다. 기능
operation을 카탈로그에 더하는 방식은 기능 추가를 공유 파일 수정으로
만든다.
test-evidence.json은 바꾸지 않았다(sourceContracts 토큰이 test-entities.ts에
그대로 있다). 제거 드릴의 플랫폼 보존 목록에 http-scenarios.ts를 더했고,
테스트 전략 문서 11절에 사용법을 적었다.

위험·한계:
- 앱 전체를 렌더하는 테스트에서 response-too-large는 끝나지 않는다.
  실행기가 MSW가 넘긴 본문을 cancel하는 promise가 끝나지 않는 기존
  제약이다. 카탈로그 통합 테스트는 프록시 fetcher로 우회한다.
- 같은 실험에서 기능 밖 테스트가 더 깨진다. 이 발견 범위 밖이라 두었다.
  http-operation-v2-v3-parity는 스키마 ID "NoRequest"를 센티널로 고정한다.
  스키마 ID는 전역이라 두 번째 기능은 다른 이름을 써야 하고, 그러면 이
  테스트가 깨진다. manual-a11y-evidence·documentation-readiness(라우트별
  a11y 기록, 16-01)와 second-api-feature-registries(무효화 그래프 추가가
  breaking, 16-01)도 깨진다.
- test:sample-removal, test:http-scenario-evidence는 pnpm이 필요해 돌리지
  않았다.

검증:
RED: 참조 기능을 토큰 경계로 order로 바꾼 복사본(order-context,
EXTERNAL_PACKAGE 출처 포함, 커밋 안 함)을 넣고 tests/features
tests/component tests/runtime-schema를 돌렸다. 5파일 8개 실패. 기능 밖은
① 2개(["order-context","reference-context"]), ② 2개(order-feature를 꺼서
참조 링크가 남음), ③ 1개(ReleaseManifestError)다. 나머지 3개는 복사한
테스트다. 하네스 probe는 TS2345 2건, 실행 시 TypeError(catalog.ts:469).
새 통합 테스트는 기준 하네스에서 모듈 없음으로 실패하고, 기준
assertOperationScenario는 미등록 operation에 TypeError를 낸다.
GREEN: 같은 복사본으로 같은 폴더와 카탈로그 통합 테스트를 돌렸다. 78파일
중 실패는 출처를 바꾼 복사본 provenance 1파일뿐이고 ①~③은 통과한다.
order 테스트가 createHttpScenarioHandler(LIST_ORDER_RESOURCES_CONTRACT)로
content-type-mismatch·schema-mismatch·server-terminal-503을 화면에서
확인했다(카탈로그 수정 없음).
복사본을 지운 뒤: tests/features·component·runtime-schema·unit·
integration(security-followup-archive 제외)·contract 250파일 3111개 통과,
카탈로그 57/57, check-test-evidence --scenario-only·--source-only PASS,
tsc app·test·node 통과, verify-documentation-readiness PASS_SCOPED,
check-ci-contract PASS, 바꾼 파일 eslint 통과.

Refs: docs/reviews/2026-11-01-maturity-review/16-structure-patterns.md 16-02
2026-11-03 01:49:11 +09:00

Clean Architecture Frontend Template

A React/Vite reference implementation where architecture boundaries, integration behavior, release coherence, accessibility, performance, and operations are executable contracts rather than conventions.

Start locally

Requirements: the exact Node.js version in .nvmrc (currently 24.14.0) and Corepack. The repository pins pnpm in package.json.

Product source, tests, build/quality scripts, and supported tool configuration are TypeScript/TSX. allowJs is disabled. Node-side .ts scripts run directly on the pinned Node 24 runtime and are checked with NodeNext resolution plus erasable-syntax enforcement. Project-owned executable source contains no JavaScript-family files; negative architecture, security, and type-compatibility fixtures are TypeScript/TSX as well.

corepack pnpm install --frozen-lockfile
corepack pnpm dev

Runtime configuration

Runtime-public settings are validated against one schema before the product tree mounts (runtimeConfigV2ArtifactSchema in src/contracts/release-artifacts.ts). Client secrets are forbidden.

The source of truth is config/runtime/<profile>.json, one file per environment: local, development, staging, production. corepack pnpm build writes dist/config.json from the selected profile (scripts/generate-runtime-config.ts). public/config.json is only the local profile for corepack pnpm dev; the build replaces it, so settings put there never reach a deployment. Keep it equal to config/runtime/local.json plus BUILD_ID: local-build and RELEASE_ID: local-release; tests/unit/deployment-admission.test.ts fails when the two differ.

Build and deploy variables, lowest precedence first:

Variable Sets Default
APP_PROFILE which config/runtime/<profile>.json is used local; an empty value fails the build
RUNTIME_API_BASE_URL API_BASE_URL, overriding the profile; the CI workflow cannot pass it (see below) the profile value
RUNTIME_TELEMETRY_ENDPOINT TELEMETRY_ENDPOINT, overriding the profile; the CI workflow cannot pass it (see below) the profile value
VITE_BUILD_ID BUILD_ID in the runtime config and the release manifest local-build
RELEASE_ID RELEASE_ID in the runtime config and the release manifest local-release
RELEASE_TARGET the environment FE-GATE-027 admits the build to; must equal APP_PROFILE none; admission refuses without it

verify:documentation fails if this table stops naming a variable the build or admission reads (scripts/verify-documentation-readiness.ts).

Only the two RUNTIME_* values can differ from the reviewed profile. Anything else changes by editing the profile file. Staging and production reject demo auth, non-HTTPS endpoints and the names reserved for examples and tests (example.com, example.net, example.org and their subdomains, .example, .invalid, .test). The shipped staging and production profiles use *.example.com, so admission refuses them until a project sets its own endpoints.

In CI the only way to set the endpoints is to commit them to config/runtime/<profile>.json. The CI contract binds just APP_PROFILE and RELEASE_TARGET to the build job (scripts/contracts/ci-gates.ts), so a RUNTIME_* repository variable never reaches the build.

A local production build and its admission check:

APP_PROFILE=production \
RUNTIME_API_BASE_URL=<your-api-origin>/ \
RUNTIME_TELEMETRY_ENDPOINT=<your-telemetry-endpoint> \
VITE_BUILD_ID=<unique build id> RELEASE_ID=<unique release id> \
corepack pnpm build
APP_PROFILE=production RELEASE_TARGET=production corepack pnpm check:release-admission

With CI=true the gate runner (corepack pnpm ci:gate) also requires VITE_COMMIT_SHA, SOURCE_DATE_EPOCH and CI_RUNNER_IMAGE before it runs a gate (scripts/lib/build-environment.ts, scripts/run-ci-gate.ts). The CI variable list is in docs/operations/ci-quality-gates.md.

Included starter experience

The default build mounts a domain-neutral application shell with a header, responsive sidebar, route focus management, session integration status, a persistent system / light / dark theme selector, and a language selector.

The route list is ROUTE_REGISTRY (src/features/installed-feature-contracts.ts): the platform routes of src/contracts/routes.ts plus the routes of every installed feature, the removable reference feature included. The platform overview page (/examples/platform) shows the composed list at runtime, so this README keeps no copy of it and adding a feature does not edit it.

AUTH_MODE=demo is credential-free and accepted only in local/development environments. Deployments use AUTH_MODE=external and provide the opaque auth owner described in docs/architecture/starter-experience.md. The client route policy is user experience only; server authorization remains authoritative.

Support scope

Four tiers. The status words on the right are the ones the catalogs and design documents use; the next table maps them.

Tier What it covers Status words
Default In the default build and covered by the merge gates: the application shell and example routes, the REST HTTP executor, TanStack Query server state, Local/Session Storage registries, cross-tab invalidation, runtime config profiles and the release manifest check, AUTH_MODE=external (demo only in local/development), the typed message catalog, and the removable reference feature. dist/ is served by a static host (docs/architecture/static-delivery.md) COMPOSED
Optional (recipe) Not installed. A project copies one of the recipes in config/recipes/frontend-capability-recipes.json and narrows it (docs/architecture/optional-adapter-recipes.md). realtime, offline-indexeddb, service-worker-pwa and file-transfer also ship a tested reference runtime that the default build leaves out RECIPE_AVAILABLE, NOT_INSTALLED, AVAILABLE_NOT_COMPOSED
Experimental Designed and decided, but the runtime is missing or unfinished; finish it before building on it. GraphQL, gRPC-Web, Connect-Web and Protobuf adapters, Range resumable download, IndexedDB query persistence, the local preview decode-safety probe. src/features/local-draft-feature is an architecture sample, not installed DESIGNED_NOT_IMPLEMENTED
Not supported Deliberately not selected, or browsers cannot guarantee it: SSR, app-managed background upload and download, directory selection, persistent file handles, product query persistence, exactly-once delivery between tabs NOT_SELECTED, PLATFORM_LIMITED

The rows come from docs/architecture/browser-data-capability-completion-ledger.md, docs/architecture/client-cache-and-storage.md and docs/architecture/api-contract-schema-mapper-and-server-state.md.

Status word Where it appears Meaning Tier
COMPOSED capability ledger, design documents wired into the default production path Default
INSTALLED a project's own recipe catalog (step 10 of the recipe procedure) the project added the recipe Default, for that project
RECIPE_AVAILABLE recipe catalog status a recipe exists to copy; nothing is installed Optional
NOT_INSTALLED recipe catalog defaultStatus; a src/features/<id>/NOT_INSTALLED marker file not part of the build Optional (recipe) or Experimental (feature)
AVAILABLE_NOT_COMPOSED capability ledger; recipe referenceRuntime.status code and tests exist; the default build leaves it out Optional
DESIGNED_NOT_IMPLEMENTED capability ledger, design documents design approved, runtime missing Experimental
NOT_SELECTED capability ledger, design documents deliberately not chosen Not supported
PLATFORM_LIMITED capability ledger browsers cannot guarantee it; offered only behind a probe and a fallback, if at all Not supported as a guarantee

Gate results (PASS, PASS_SCOPED, UNVERIFIED, FAIL_UNVERIFIED) are verdicts on evidence, not support tiers.

Browsers: the build targets Chrome and Edge 111, Firefox 128, and Safari and iOS 16.4. That is the higher of Vite 8's default JavaScript target (baseline-widely-available; vite.config.ts sets no build.target) and the CSS targets of Tailwind CSS 4. There is no browserslist. The end-to-end suite runs on the desktop Chromium, Firefox and WebKit builds that Playwright 1.62 pins, plus one Chromium phone-size smoke (playwright.config.ts). Older versions inside the target range and real mobile browsers are not tested.

Architecture

This repository is a Frontend Application Foundation: a starter/composition skeleton plus a reusable capability platform. Platform capabilities stay horizontal while product business features use vertical slices.

src/ has nine top-level folders. The descriptions match the table in docs/architecture/layers.md, which also names every import rule:

  • src/bootstrap — the composition root: runtime configuration, concrete adapter construction and the React mount
  • src/apps — deployable apps: each app-module.ts declares an app and its context budget; template-app.ts is the app this build produces
  • src/contexts — bounded contexts: each context-module.ts declares its app, route root and feature budget
  • src/features — removable vertical slices (src/features/<id>/{domain,application,contracts,adapters,presentation}) and the installed-feature catalogs (src/features/*.ts)
  • src/presentation — generic UI and the inbound adapter: routes, layouts, the design system, pages and providers
  • src/adapters — reusable capability runtimes that implement application ports: HTTP, auth, storage, query cache, telemetry, workers and more
  • src/application — generic use cases, ports, policies and view-models
  • src/contracts — shared vocabulary and registries read by several layers, the workers and the build and release scripts
  • src/platform — product-neutral primitives any folder may use: budgets, execution context, resilience, the telemetry pipeline, error envelopes and release coherence

Dependencies point inward. Every folder may also import contracts and platform:

presentation -> application -> contracts -> platform
adapters -----^
bootstrap composes concrete adapters
apps -> contexts -> features   (an app deploys contexts; a context owns features)
feature use case -> feature port <- feature-owned capability binding

Domain code lives inside each feature; there is no top-level domain folder.

See docs/architecture/frontend-application-foundation.md, docs/architecture/overview.md, docs/architecture/layers.md, and docs/architecture/starter-experience.md. The removable vertical slice is under src/features/reference-feature; its domain, application input, HTTP binding, contracts, route runtime, and presentation own their contributions. The central installed catalogs only aggregate selected contributions. The generic starter routes continue to typecheck, test, and build after that feature is removed.

Platform capability review

The starter shell is implemented, but the repository review also records the remaining work required before feature teams can use every declared contract through one end-to-end application path:

These documents distinguish repository defaults from opt-in adapters and project-owned integrations. They are target designs and review findings; a capability is not treated as implemented until its branch acceptance criteria and executable gates pass.

Documentation

docs/README.md sorts the documents into current contracts, target designs and work history.

Files you can delete after copying

These record how the template was built. Nothing in the build or the gates reads them, except the one file noted below (tests/unit/deletable-history-documents.test.ts checks this).

Path Contents
docs/superpowers/ past plans and specs
docs/reviews/ reviews and the review guide. Keep docs/reviews/adapters/INVENTORY.md: check:adapter-inventory (FE-GATE-010) reads it
SPEC.md, tasks/ requirements and task list of the 2026-09-25 review fix round
CLAUDE.md review instructions for the template repository itself; replace it with your own
PRODUCT.md product context of the template itself (users, purpose, principles) for design tools; replace it with your product's

The reference feature is not in this list: deleting its directory alone leaves tests, policy entries and CI scripts behind that fail the gates. scripts/test-sample-removal.ts removes it from a copy of the repository and lists everything that has to go with it (its header comment and SAMPLE_EXTRAS); do the same in your project and run the gates.

Verification

Common local checks:

corepack pnpm lint
corepack pnpm check:types
corepack pnpm check:types:app
corepack pnpm check:types:node
corepack pnpm check:types:test
corepack pnpm check:architecture
corepack pnpm test:all
corepack pnpm test:contract
corepack pnpm test:e2e
corepack pnpm test:a11y
corepack pnpm build
corepack pnpm check:bundle
corepack pnpm test:performance
corepack pnpm verify:compatibility
corepack pnpm verify:release
corepack pnpm check:registries
corepack pnpm drill:runbooks
corepack pnpm check:ci

drill:runbooks stops at the first drill that is not PASS. Without provider evidence every drill ends UNVERIFIED (exit 3), because a drill never reports a check it could not run locally as PASS; see "Runbook jobs" in docs/operations/ci-quality-gates.md.

test:all is the ordinary product-development loop and intentionally excludes host-level CI-runner assurance. Run corepack pnpm test:system only on the compatible Linux assurance host described in docs/testing/taxonomy.md.

check:types는 source, Node scripts/config와 tests를 분리된 TypeScript project로 모두 검사한다. type/architecture/security/registry의 invalid fixture는 config/ci/gates.json에서 “실패해야 통과”하는 negative gate로 실행된다. 도구 호환성 결정은 VD-01에 기록돼 있다.

Application feature input은 module augmentation으로 닫힌 ID와 정확한 input shape를 제공하며, 공통 Result<Value, Failure = AppFailure>는 error registry의 failure kind만 application/presentation 경계를 통과시킨다. Architecture gate는 TypeScript/TSX의 static, dynamic, type import를 별도 정적 그래프로 분석하고 runtime/source 영역의 JavaScript 재유입도 거절한다. 해석되지 않은 import, parse failure, 금지 계층 edge와 순환 의존은 모두 fail-closed이며 전용 TypeScript/TSX negative fixture로도 검증된다.

Install the pinned Playwright browser engines before the first cross-browser run:

corepack pnpm exec playwright install --with-deps chromium firefox webkit

Two gates intentionally need external evidence:

  • review:a11y-manual (release gate FE-GATE-028) needs a signed human keyboard/focus/screen-reader review of every registered route, one record per route at artifacts/tests/a11y-manual/<ROUTE_ID>.md. The routes are ROUTE_REGISTRY; verify:documentation fails, naming the route ID, when a registered route has no record. The merge gate FE-GATE-009 runs only review:a11y-manual -- --format-only, which checks that every route record keeps the template's fields, reviewed or still pending.
  • collect:web-vitals-evidence stays FAIL_UNVERIFIED until a reviewed minimum eligible-sample threshold and 28 days of production data exist.

Live hosting verification (FE-GATE-019, production stage) requires HOSTING_BASE_URL and the promoted release deployed by the workflow's deployment job. That job is an empty slot until the project fills it (docs/operations/ci-quality-gates.md); until then the result is UNVERIFIED, not PASS. A host serving another release fails.

CI and evidence

The gate registry is config/ci/gates.json; the Gitea workflow is .gitea/workflows/quality-gates.yml. It follows:

MERGE_READY -> RELEASE_READY -> PROD_PROMOTION_READY -> FIELD_SLO_READY

DOCUMENTATION_READY is independent. No gate is downgraded to a warning.

The workflow runs on pull requests, pushes to main and develop, and v* tags. The Git host of this repository may not have Actions enabled, so a pull request can show no gate status at all; no status is not a pass. Until the host runs the workflow and marks the merge gates as required checks, run the 13 merge gates locally before merging (FE-GATE-008 and 009 need Playwright browsers):

for gate in 001 002 003 004 005 006 007 008 009 010 011 013 020; do
  corepack pnpm ci:gate -- "FE-GATE-$gate" || break
done

Machine-readable evidence is written below artifacts/; generated evidence is ignored by Git while .gitkeep files preserve the taxonomy.

Operational details are in docs/operations/, with incident procedures in docs/runbooks/.

Updating a copied project

Template versions are Git tags vX.Y.Z. CHANGELOG.md lists the changes between tags, marks security fixes [보안] and contract changes [계약] (backend, deployment, CI or feature code must change too), and names the affected paths.

Record where you started. Right after copying, commit a one-line .template-origin file at the root of your project with the template tag (or commit) you copied and the date, for example v0.2.0 2026-09-26.

Take a template fix with Git. cherry-pick works even when your repository does not share the template's history, because it merges against the picked commit's parent:

git remote add template <template repository URL>
git fetch template --tags
git log --oneline <your origin>..template/main   # what changed since you copied
git cherry-pick -x <commit>                      # one fix; -x records its origin

When the files have moved or diverged too far for a clean pick, read the change as a diff and apply it by hand:

git diff <commit>^ <commit> -- <paths from CHANGELOG>

Afterwards run the local merge gates from "CI and evidence", apply the backend or deployment change a [계약] row names, and update .template-origin once you have caught up to a tag. git revert undoes a pick.

Defects: if a problem reproduces on an unmodified checkout of your .template-origin commit, it is a template defect. Report it on the template repository with that commit and the reproduction; the template maintainer classifies it and ships the fix with a CHANGELOG entry. A problem that needs your changes to reproduce belongs to your project, and applying a template fix to your copy is your project's job.

S
Description
No description provided
Readme
20 MiB
Languages
TypeScript 98.2%
Python 1%
CSS 0.5%
Shell 0.3%