문제: a11y.json의 notChecked는 접근성 spec이 남긴 기록만으로 정해졌다. 기록이 없으면 "검사함"이었고, 어느 라우트에 기록이 있어야 하는지는 spec 말고 아무도 몰랐다. 리뷰 11-R2에서 실패 화면 분기의 기록 호출 reason을 null로 바꾸자 라우트 test 10건, write-a11y-report.ts, 증거 schema가 모두 통과하고 a11y.json이 상세 라우트를 scope(통과)에 넣고 notChecked: []를 적었다. 1103/11-01이 고친 거짓 주장이 한 줄로 돌아온다. 같은 실행 뒤 지난 실행의 기록 파일도 디렉터리에 남아 있었다. 고른 방법: 리뷰의 (다)와 기록 초기화. - scripts/lib/a11y-data-state.ts의 oneResourceReadRoutes가 설치된 descriptor만으로 "실패 화면으로만 볼 수 있는 라우트"를 찾는다. 로그인이 필요한 라우트의 paramsSchema가, 경로 파라미터가 있고 빈 목록을 거부하는 GET의 입력 스키마일 때다. GET 쪽 규칙은 tests/e2e/support/installed-api-answers.ts가 답하는 규칙과 같다. 참조 기능 상세와 create:feature --with-create 상세는 GET과 같은 <Pascal>Params를 쓰므로 이 규칙에 든다. - write-a11y-report.ts는 그 라우트가 기록(notChecked)에 없으면 `a11y.json not written:`과 라우트·operation을 찍고 rc=1로 끝난다. a11y.json은 쓰지 않는다. test:a11y(FE-GATE-009)가 실패한다. - accessibility.spec.ts의 라우트 test는 시작할 때 자기 기록을 지운다. 기록 호출에 닿지 못한 실행이 지난 실행의 기록을 그대로 쓰지 않는다. 엔진 셋이 같은 파일을 쓰지만 각 엔진은 지운 뒤에만 쓰고, 실행 중에 기록을 읽는 곳이 없어 순서가 섞여도 결과가 같다. - 단위 테스트: 가짜 descriptor로 규칙(목록·경로 아래 목록·DELETE·공개 라우트 제외)과 거절(null 기록은 거절, 기록이 있으면 통과, 기대 밖 기록은 허용). 참조 기능 테스트가 실제 descriptor에서 REFERENCE_RESOURCE_DETAIL 하나가 나오는지 본다. 이 줄이 없으면 규칙이 아무것도 찾지 못해도 모른다. 참조 기능과 함께 지워진다. - 11-R2 diff는 그대로 적용된다(문맥 줄 유지, 4줄 offset). 버린 대안: - (나) 두 상태 모두 기록하고 기록 없는 라우트를 실패: 기록 삭제는 잡지만 reason을 null로 바꾸는 11-R2는 못 잡는다. 실행 경계(TEST_RUN_ID)도 정해야 한다. - 증거 schema(release-artifacts.ts)에서 검사: schema 모듈이 기능 런타임 전체(top-level await)를 불러야 하고, 그 모듈을 쓰는 스크립트가 많다. - spec 안에서 기록을 다시 읽어 대조: 같은 test의 두 줄을 서로 대조할 뿐이고, 시작 시 초기화와 엔진 동시 실행이 겹치면 거짓 실패가 난다. - 기록 호출의 모양을 바꿔 사실(읽은 operation)을 적고 report가 판정: 11-R2 변이 자리가 사라져 리뷰 변이로 확인할 수 없다. 위험·한계: 방향은 하나다. 규칙이 찾은 라우트가 기록에 없으면 실패하고, 규칙이 못 찾는 라우트를 spec이 notChecked로 적는 것은 덜 주장하는 쪽이라 받는다. paramsSchema가 GET 입력과 다른 상세 페이지(손으로 쓴 기능)는 규칙이 찾지 못해 기록만으로 정해진다(이전과 같다). 공개 라우트는 spec이 API에 답하지 않으므로 이 규칙 밖이다. write-a11y-report.ts가 기능 런타임 전체를 불러온다(check:registries와 같은 경로). check:types:node가 그 그래프를 node 설정으로 검사한다. 노트북에서 아무것도 실행하지 않았다. 검증: desktop batch에서 확인. node scripts/run-vitest.ts run tests/unit/a11y-report.test.ts tests/features/reference-feature/reference-contract.test.ts 11-R2 변이와 기록 줄 삭제 변이에서 playwright(chromium, @a11y /) 뒤 node scripts/write-a11y-report.ts rc=1, 변이 없이 rc=0. corepack pnpm test:a11y Refs: 1106/11-01
20 KiB
20 KiB
실패 메시지와 고칠 파일
기능을 만들 때 흔히 보는 실패 메시지다. 메시지는 코드의 문자열을 그대로 옮겼다. <...>는 실제 값이 들어가는 자리다.
찾는 법: 메시지 앞부분으로 이 문서를 검색한다. 없으면 git grep '<메시지 앞부분>' -- src scripts로 코드를 찾는다. 코드가 정본이다.
메시지가 어느 단계에서 나오는지:
create:feature → 명령이 파일을 쓰기 전에 거부
generate:feature-index → 모든 빌드·검사 명령이 먼저 돌린다
조립·모듈 로드 → 테스트, 빌드, 앱 부팅 어디서든
check:registries → FE-GATE-010
lint / check:architecture / check:i18n → FE-GATE-002, FE-GATE-010
문서·접근성 → FE-GATE-017, FE-GATE-009, FE-GATE-028
릴리스 승인·공급망 → FE-GATE-027, FE-GATE-012
제거 드릴 → FE-GATE-020
<base>는 기능 ID에서 끝의 -feature를 뗀 것이다.
생성 명령 (create:feature)
모두 create:feature: 뒤에 나온다. 종료 코드는 1이다(인자 오류는 2).
| 메시지 | 원인 | 고칠 곳 |
|---|---|---|
feature id "<id>" must be kebab-case (lower-case words joined by single hyphens), at most 40 characters |
ID 형식 | 명령 인자 |
context id "<context>" must be kebab-case (lower-case words joined by single hyphens), at most 64 characters |
--context 형식 |
명령 인자 |
feature id <id> is already a feature or context |
같은 ID가 있다 | 다른 ID |
feature id <id> would prefix its ids with "<base>", which <other> already uses |
접두어가 기존 기능과 같다 | 다른 ID |
context <context> already exists; pass --context <context> to add the feature to it |
새로 만들 context가 이미 있다 | --context <context>를 준다 |
context id <context> is a feature id |
context ID가 기능 ID와 같다 | 다른 --context |
src/contexts has a <context> directory without a context declaration |
선언 없는 context 폴더 | src/contexts/<context>/context-module.ts를 만들거나 폴더를 지운다 |
another context already owns the route root <root>/* |
같은 라우트 루트를 다른 context가 가진다 | 다른 ID, 또는 그 context에 --context로 넣는다 |
a new context needs exactly one deployable app (declared: <apps>); pass --context <an existing context> |
앱이 여럿이라 새 context의 소속을 정할 수 없다 | --context |
route <ROUTE_ID> (<path>, <chunkId>) collides with installed route <ROUTE_ID> (<path>, <chunkId>) |
route ID·경로·chunk가 겹친다 | 다른 ID |
message keys already exist: <keys> |
문구 키가 겹친다 | 다른 ID |
generated topic <topic> is already installed; run the command again |
무작위 topic이 우연히 겹쳤다 | 명령을 다시 돌린다 |
contract package <packageId>@<version> is not a pinned identity: <reason> |
패키지 신원 형식. <reason> 예: <id>: package version must be exact SemVer, <id>: package digest, <id>: package sourceRevision, <id>: packageId |
--package, --digest, --revision |
--package, --digest and --revision go together. ... |
셋 중 일부만 줬다 | 셋을 함께 준다 |
--package must be @scope/name@<exact version>. ... |
버전 없는 패키지 이름 | @scope/name@1.2.3 꼴 |
--keyed needs --with-create. ... |
--keyed만 줬다 |
--with-create --keyed |
refusing to overwrite: <paths> |
쓸 파일이나 기능 폴더가 이미 있다 | 그 경로를 확인하고 지우거나 다른 ID |
the feature index generator rejected the feature, nothing was kept: |
생성기가 거부했다. 만든 파일은 모두 지웠다 | 뒤따르는 생성기 메시지(아래 절) |
생성기 (generate:feature-index)
| 메시지 | 원인 | 고칠 곳 |
|---|---|---|
Feature <id> belongs to undeclared context <context> |
context 선언이 없거나 FEATURE_CONTEXT_ID 오타 |
src/contexts/<context>/context-module.ts, 또는 src/features/<id>/feature-module.ts |
Context <context> belongs to undeclared app <app> |
CONTEXT_APP_ID 오타 |
src/contexts/<context>/context-module.ts |
<file> must export a literal <NAME> |
헤더를 상수 참조나 식으로 썼다. 생성기는 글자로 읽는다 | 그 파일. export const <NAME> = "<값>"; 꼴 |
<file> must export a positive integer <NAME> |
예산 값이 정수 리터럴이 아니다 | 그 파일 |
src/features/<dir> has no feature-module.ts; add one or mark the directory with NOT_A_FEATURE |
기능 폴더에 선언 파일이 없다 | feature-module.ts를 만들거나, 기능이 아닌 샘플 폴더면 NOT_A_FEATURE 파일을 둔다 |
src/features/<dir> has both feature-module.ts and NOT_A_FEATURE; … |
기능이 아니라고 표시한 폴더에 선언 파일이 있다 | 기능으로 설치하려면 NOT_A_FEATURE를 지운다. 설치하지 않으려면 feature-module.ts를 지운다 |
Duplicate generated feature ids: <id> |
두 폴더가 같은 FEATURE_MODULE_ID |
한쪽 feature-module.ts |
Duplicate context id: <id> |
두 폴더가 같은 CONTEXT_MODULE_ID |
한쪽 context-module.ts |
Context <context> feature cardinality <n> exceeds budget <max> |
context의 기능 수가 예산을 넘었다 | CONTEXT_MAX_FEATURES, 또는 새 context |
App <app> context cardinality <n> exceeds budget <max> |
앱의 context 수가 예산을 넘었다 | src/apps/<app>/app-module.ts의 APP_MAX_CONTEXTS |
조립·모듈 로드
테스트, 빌드, 앱 부팅 어디서든 나온다. 한 기능의 실수가 거의 모든 게이트를 같이 실패시킨다. 첫 메시지를 본다.
인증 프로필
| 메시지 | 원인 | 고칠 곳 |
|---|---|---|
<featureId>/<operationId>: unknown authProfileId <id> (계약 조립 오류의 reason) |
없는 인증 프로필 | contracts/<base>-contract-contribution.ts의 frontend.authProfileId. 제품 프로필이면 src/contracts/product-contracts.ts |
<featureId>/<operationId>: <METHOD> with cookie profile <id> must require x-csrf-token or x-xsrf-token (계약 조립 오류의 reason) |
쿠키 인증 프로필로 쓰기 요청을 보내는데 프로필이 CSRF 헤더를 요구하지 않는다 | src/contracts/product-contracts.ts의 그 프로필 requiredCredentialHeaders. 짝 백엔드는 x-xsrf-token |
Product REST auth profile <id> reuses a template profile id. |
제품 프로필 ID가 템플릿 것과 같다 | src/contracts/product-contracts.ts |
계약·스키마·mapper
| 메시지 | 원인 | 고칠 곳 |
|---|---|---|
부팅 화면 CONTRACT_SET_PACKAGE_MISSING / CONTRACT_SET_PACKAGE_UNEXPECTED(corepack pnpm dev, dev server를 쓰는 브라우저 테스트) |
dev manifest public/release-manifest.json의 계약 패키지가 설치된 기능과 다르다. 기능을 손으로 더하거나 지웠다 |
node scripts/write-dev-release-manifest.ts로 다시 쓰고 커밋한다. tests/unit/dev-release-manifest.test.ts가 같은 어긋남을 잡는다 |
Invalid or duplicate schema definition: <schemaId> |
스키마 ID 중복 또는 메타 형식 | contracts/<base>-schema-metadata.ts. 접두어를 붙인다 |
duplicate operation: <operationId> (계약 조립 오류의 reason) |
operation ID 중복 | contracts/<base>-contract-contribution.ts. 접두어를 붙인다 |
FE-REG-API.<operationId>.requestSchema references unknown FE-REG-SCHEMA.schemaId=<id> |
descriptor의 입력 스키마 ID가 스키마 메타데이터에 없다 (responseSchema, problemSchema도 같은 꼴. 실패 본문 행은 boundary: "api-problem") |
contracts/<base>-schema-metadata.ts |
<schemaId>: row <boundary>, used as <boundary> (tests/unit/schema-metadata-policy.test.ts) |
스키마 메타 행의 boundary가 그 스키마가 쓰인 자리와 다르다. no FE-REG-SCHEMA row는 쓰이는데 행이 없다 |
contracts/<base>-schema-metadata.ts |
<operationId> <schemaId>: row states no direction, used as <direction> 또는 row states no unknownFieldPolicy, validator <policy> (tests/unit/schema-metadata-policy.test.ts) |
descriptor가 쓰는 스키마의 행이 direction·unknownFieldPolicy를 적지 않았다(1106/07-02) |
contracts/<base>-schema-metadata.ts에 두 칸을 적는다. 값은 쓰인 자리와 검증기가 정한다 |
Unregistered route codec: <codecId> |
URL 함수가 기능 codec을 buildRouteUrl에 넘기지 않았다 |
presentation/<base>-routes.ts |
contract package <packageId> is declared, but no loaded contribution pins it |
계약 contractPackages에 적은 패키지를 계약 기여가 쓰지 않는다 |
contracts/<base>-contract-contribution.ts의 source |
<id> contributes contract package <packageId>, which no installed feature declares in contracts.contractPackages |
계약 기여의 신원과 계약 선언의 신원이 다르다 | 둘 다 <BASE>_CONTRACT_PACKAGE 하나를 쓰게 한다 |
contract package <packageId> is declared with conflicting identities |
두 기능이 같은 패키지를 다른 버전·digest로 선언했다 | 두 기능의 <BASE>_CONTRACT_PACKAGE를 맞춘다 |
계약 조립 실패의 메시지는 Installed contract contribution is not composable: <reason>이다. reason은 오류 객체(ContractContributionError)의 reason 속성에도 있다.
reason |
원인 | 고칠 곳 |
|---|---|---|
<id>: TEMPLATE_FIXTURE REFERENCE_FEATURE_V1 belongs to reference-feature only; pin an EXTERNAL_PACKAGE |
참조 기능 전용 출처를 다른 기능이 썼다 | contracts/<base>-contract-contribution.ts의 source를 EXTERNAL_PACKAGE로 |
duplicate operation: <operationId> |
두 기여가 같은 operation ID | 접두어를 붙인다 |
duplicate contributionId: <id> |
두 기여가 같은 contributionId |
contracts/<base>-contract-contribution.ts |
<id>/<operationId>: unknown authProfileId <profile> |
V3 frontend.authProfileId가 없는 프로필 |
V3 frontend.authProfileId |
<id>/<operationId>: retry budget contradicts NEVER retry semantics |
NEVER인데 retryBudget가 0이 아니다 |
V3 frontend.retryBudget |
<id>/<operationId>: KEYED commands require a recovery descriptor |
KEYED인데 commandRecovery가 없다 |
V3 commandRecovery |
<id>/<operationId>: <GET·HEAD> is a read; its retrySemantics is SAFE or IDEMPOTENT, not <값> |
읽기에 KEYED나 NEVER를 적었다 |
V3 retrySemantics. 재시도를 막으려면 frontend.retryBudget: 0 |
<id>/<operationId>: command operations require a command effect descriptor |
쓰기에 commandEffect가 없다 |
V3 commandEffect |
<id>/<operationId>: refusedBeforeWrite cannot declare <code>; contract 6.1 reads this platform code as possibly raised after the write |
commandEffect.refusedBeforeWrite에 계약 문서 6.1절이 "쓰기 뒤 가능"으로 둔 플랫폼 code(BAD_PARAMETER, DB_* 등)를 적었다 |
그 code를 목록에서 지운다. 그 실패는 결과 불명으로 남는다(02 결정표 4절) |
<id>/<operationId>: read operations carry no command descriptors |
GET에 commandEffect·commandRecovery를 적었다 |
둘 다 null |
<id>/<operationId>: responseEnvelope NONE, but <other> in the same contribution reads ENVELOPE_V1; ... |
한 계약 기여 안에서 operation 하나만 응답 모양이 다르다. 손으로 더한 operation에 "NONE"을 적었거나, TypeScript 밖에서 만든 descriptor가 줄을 뺐다 |
그 operation에 responseEnvelope: "ENVELOPE_V1" as const를 적는다. 정말 다른 백엔드면 기여를 나눈다 |
check:types: Property 'responseEnvelope' is missing in type ... (descriptor의 satisfies InstalledHttpContract<...>) |
descriptor에 응답 모양 줄이 없다. 1103/16-01부터 필수 칸이다 | 짝 백엔드면 responseEnvelope: "ENVELOPE_V1" as const, 감싸지 않는 백엔드면 "NONE" as const |
<id>: package version must be exact SemVer |
버전 범위(^1.2.0)나 형식 오류 |
<BASE>_CONTRACT_PACKAGE.version |
라우트·context
| 메시지 | 원인 | 고칠 곳 |
|---|---|---|
Duplicate route registry key: <ROUTE_ID> |
route ID 중복 | 계약 routes. 접두어를 붙인다 |
Duplicate route runtime contract key: <ROUTE_ID> |
routeRuntimeContracts 중복 |
계약 routeRuntimeContracts |
Route <ROUTE_ID> (<path>) of feature <id> is not under the route root of its context <context> (<root>): the router would answer NOT_FOUND. |
라우트가 context 루트 밖 | 계약 routes.*.path, 또는 CONTEXT_ROUTE_PATH |
Route <ROUTE_ID> (<path>) of feature <id> is not under the route root of its context <context> (<root>): context <other> (<root>) takes that URL. |
다른 context의 루트 아래 | 같은 곳 |
Route handle <ROUTE_ID> loaded by context <context> is not a contract route of its features (<ids>). |
context-routes.ts의 handle이 계약에 없는 route ID |
src/features/<id>/context-routes.ts |
문구·서버 상태
| 메시지 | 원인 | 고칠 곳 |
|---|---|---|
Duplicate <locale> message key: <key> |
문구 키 중복 | contracts/<base>-message-catalog.ts. 접두어를 붙인다 |
Duplicate invalidation topic: <topic> |
topic 중복. 복사한 topic | 계약 invalidation. topic을 새로 만든다 |
Duplicate invalidation namespace: <key> |
namespace 중복 | defineQueryNamespaceIdentity 이름 |
Query invalidation topic is invalid. |
topic 형식이 qinv. + 26자가 아니다 |
defineQueryInvalidationTopic 값 |
Orphan invalidation topic: <topic> |
edge가 없는 topic | 계약 invalidation.edges |
Unregistered server-state profile: <profileId> |
없는 profile | 쿼리 바인딩의 profileId |
commandMutationIdentity: <operationId> is a GET; a mutation binds a write operation |
뮤테이션 정책에 읽기 descriptor를 넘겼다 | 정책의 commandMutationIdentity(...) 인자를 쓰기 descriptor로 |
조립 기여
| 메시지 | 원인 | 고칠 곳 |
|---|---|---|
feature <id> needs <capability>, which the host did not provide |
템플릿이 만들지 않는 capability | src/bootstrap/product-composition.ts의 capabilities, 또는 needs |
feature adapter contribution <id> installed an input for <other> |
기여의 featureId와 만든 input의 featureId가 다르다 |
adapters/create-<base>-feature-input.ts |
duplicate feature adapter contribution: <id> |
두 기여가 같은 기능 ID | 복사한 기여 파일 |
Feature <id> installed an input for <other> |
지연 로드한 기능이 다른 기능의 input을 냈다 | adapters/create-<base>-feature-input.ts |
레지스트리 (check:registries)
모두 Registry governance failed: 다음 줄에 나온다.
| 메시지 | 원인 | 고칠 곳 |
|---|---|---|
FE-REG-ROUTE.<ROUTE_ID> duplicates path=<path> from <ROUTE_ID> |
경로 중복 (chunkId=도 같은 꼴) |
계약 routes |
FE-REG-ROUTE.<ROUTE_ID>.loadingSurface value <value> does not match <pattern> |
로딩 화면 이름이 케밥 표기가 아니다 | 계약 routes.*.loadingSurface |
FE-REG-ROUTE.<ROUTE_ID>.<field> has unknown value <value> |
access·errorSurface가 정해진 값이 아니다 |
계약 routes |
FE-REG-ROUTE.<ROUTE_ID>.paramsSchema references unknown FE-REG-SCHEMA.schemaId=<id> |
라우트 스키마 ID를 기능이 등록하지 않았다 (searchSchema도 같은 꼴) |
계약 스키마 메타 |
FE-REG-API.<operationId> has no executable consumer for operationId=<operationId> |
계약의 operation을 기능 adapters/·application/에서 쓰지 않는다 |
쓰지 않으면 descriptor를 지운다 |
missing registry source <path>: <message> |
레지스트리 source를 읽다가 오류가 났다. 계약 조립 실패면 <message>가 Installed contract contribution is not composable: <reason>이고 <reason>이 위 reason 표의 값이다. 다른 오류가 reason 속성을 message와 따로 가지면 끝에 (reason: <reason>)이 붙는다. 읽지 못한 레지스트리는 removed 증거를 요구하지 않는다 |
<reason>이 가리키는 곳 |
breaking change missing evidence: <changeId> |
행을 빼거나 바꿨는데 승인이 없다 | update:registry-baseline 또는 config/contracts/registry-change-evidence.json |
stale breaking evidence <changeId>: no breaking change in the current diff has this changeId. ... |
지금 diff와 맞지 않는 증거 행 | 그 행을 지운다 |
registry baseline approval digest mismatch: approved=<digest> actual=<digest> |
기준선 파일을 손으로 고쳤다 | update:registry-baseline으로 다시 찍는다 |
경계·lint·문구
| 메시지 | 원인 | 고칠 곳 |
|---|---|---|
check:architecture 출력의 규칙 이름 (feature-presentation-does-not-know-outbound-adapters 등) |
금지된 import | 규칙 뜻은 docs/architecture/layers.md의 "Rules" 표가 정본 |
Screen words come from the message catalog: use message(key) (0929/08-02). |
화면에 문자를 직접 썼다 | 문구 catalog에 키를 더하고 message(key) |
en-US catalog keys do not match ko-KR (I18n contract failed: 다음) |
두 locale의 키가 다르다 | contracts/<base>-message-catalog.ts |
en-US:<key> interpolation parameters do not match |
{name} 자리가 locale마다 다르다 |
같은 파일 |
문서·접근성
| 메시지 | 원인 | 고칠 곳 |
|---|---|---|
artifacts/tests/a11y-manual/ has no record for route IDs: <ids> (verify:documentation) |
라우트의 a11y 기록 파일이 없다 | 기존 pending 기록을 복사해 제목과 Route ID를 바꾼다 |
Manual accessibility record format is invalid: 다음 artifacts/tests/a11y-manual/<ROUTE_ID>.md: missing record (FE-GATE-009) |
같은 원인 | 같은 곳 |
a11y.json not written: 다음 a11y: <ROUTE_ID> reads one resource (<operationId>) but has no failure-state record in artifacts/tests/a11y-data-state (test:a11y, FE-GATE-009) |
라우트의 paramsSchema가 한 자원을 읽는 GET의 입력인데, 접근성 spec이 그 라우트를 실패 화면으로만 봤다는 기록을 남기지 않았다(1106/11-01). 그대로면 a11y.json이 그 라우트를 통과로 센다 |
tests/e2e/accessibility.spec.ts의 기록 호출(recordA11yDataState). 기능 파일은 고치지 않는다 |
Manual accessibility evidence is incomplete: 다음 <ROUTE_ID>: <failures> (FE-GATE-028) |
서명하지 않은 기록 | 03 문서 |
release IDs do not match (FE-GATE-028) |
라우트마다 다른 릴리스로 검토했다 | 같은 릴리스 후보로 다시 검토한다 |
<doc> names paths that do not exist: <paths> (verify:documentation) |
문서가 없는 경로를 적었다 | 그 문서 |
릴리스 승인·공급망
| 메시지 | 원인 | 고칠 곳 |
|---|---|---|
release admission refused for <target>: 다음 contractPackages.<packageId>: pins the placeholder identity create:feature writes; pin the published package's version, digest and revision (FE-GATE-027) |
자리표시자 계약 신원으로 공개 대상 승인 | 03 문서 "자리표시자 계약 신원 교체" |
high-risk dependency missing review: add:<name>@<version> (generate:supply-chain) |
production 의존성을 더했는데 검토 기록이 없다 | config/security/dependency-change-evidence.json |
제거 드릴
| 메시지 | 원인 | 고칠 곳 |
|---|---|---|
<id> removal failed: 다음 fixture-id-residue: residue: <files> (test:sample-removal) |
기능을 지운 뒤에도 그 기능을 가리키는 파일이 남았다. src는 기능 ID나 폴더 이름을 담은 파일, tests는 이름이 기능 ID를 담거나 기능 폴더(src/features/<id>/, tests/features/<id>/)에서 import하는 파일이다 |
그 파일을 기능 폴더 안으로 옮기거나, 기능을 가리키지 않게 한다. 목록에 템플릿 파일이 나오면 템플릿 결함이다. 그 파일을 고치지 말고 템플릿에 알린다 |
No installed feature declares FEATURE_MODULE_ID "<id>" |
--feature=에 없는 기능 ID |
명령 인자 |
feature scaffold failed: 다음 <check>: <failure> (test:feature-scaffold) |
생성한 기능이 게이트 하나를 통과하지 못했다 | scripts/create-feature.ts의 템플릿. 제품 팀이 아니라 템플릿을 고칠 일이다 |