문제
- 새 기능은 참조 기능을 복사해 이름을 바꾸는 방법뿐이다. 리뷰 16 실험 E
에서 이 방법은 12번 막혔다. 접두어 없는 전역 ID(NoRequest, qinv topic,
navigationOrder)는 치환으로 바뀌지 않고, 토큰 경계 없는 치환은
preference·supportReference를 깨뜨린다. 제품이 참조 기능을 지우면 복사할
원본도 없다.
고른 방법 (결정 D1·D2, 오케스트레이터 결정 2·4)
- scripts/create-feature.ts: pnpm create:feature <id> [--context <ctx>]
[--package @scope/name@x.y.z --digest sha256:… --revision <hex>].
템플릿을 이 파일 안에 두고 참조 기능을 import하지 않는다(D1).
- 뼈대: 파라미터 없는 목록 라우트 1, GET 1(SAFE, EXTERNAL_BEARER),
쿼리 1, topic 1, CollectionPage 1, ko-KR·en-US 문구. domain/ 없음.
검증은 공유 zodValidator, 링크는 route ID와 buildRouteUrl
(<base>-routes.ts). 빈 배열 응답은 공유 빈 상태로 그린다.
- 전역 ID는 모두 기능 접두어를 단다(D2): 스키마·mapper·operation·
contribution·policy·diagnostics·chunk·route·namespace·definitionId·
문구 키·telemetry kind·owner. topic은 qinv. + 무작위 26자(Crockford
base32)이고 설치된 topic과 겹치면 거부한다. navigationOrder는 설치된
최댓값 + 10.
- 패키지 인자가 없으면 결정 2의 자리표시자 상수를 import해 쓰고 경고를
출력한다. 인자가 있으면 external-contract-runtime의 신원 검사
(composeContractContributions)로 형식을 확인한다.
- 거부: kebab이 아닌 id, 기존 기능·context id(디렉터리 이름 포함),
같은 접두어를 쓰는 기존 기능, 이미 있는 <base>-context(--context 안내),
같은 라우트 루트·route ID·경로·chunk·문구 키.
- 폴더 밖은 새 context 선언과 pending a11y 기록만 쓴다. 기존 파일은
덮어쓰지 않고(wx), 쓰기나 직후 생성기 실행이 실패하면 만든 것을 지운다.
- 출력: 만든 파일, a11y 서명(FE-GATE-028), 돌릴 게이트 목록, 기준선
재승인이 필요 없다는 안내, 자리표시자 교체 방법.
- 테스트: tests/unit/create-feature.test.ts(렌더 결과만: 접두어, 샘플
토큰 없음, topic 형식·중복, 순서, 거부, 덮어쓰기·되돌리기).
생성된 기능의 테스트는 input 단위 테스트와 런타임 조립·라우터를 거치는
페이지 테스트다. MSW는 createHttpScenarioHandler(설치 계약)를 쓴다.
- 느린 드릴 test:feature-scaffold: removal-fixture로 만든 복사본(README·
CHANGELOG·docs 포함)에 기능을 만들고 커밋한 뒤 types, lint,
architecture, registries, i18n, design-system, diagnostics,
documentation, unit, component, integration, features, coverage,
check:ci, build를 돌린다. FE-GATE-020에 넣고 gates.json, 계약 기준선,
ci-workflow-generation 테스트의 개수를 맞췄다(workflow는 그대로).
- 결정 4: test:sample-removal이 기능 0개 검사 뒤 같은 복사본에서
create:feature로 기능을 만들고 같은 게이트를 scaffold- 이름으로 다시
돌린다.
- tests/release 고정 manifest가 계약 집합을 빈 배열로 고정해, EXTERNAL_
PACKAGE를 쓰는 첫 기능에서 7건이 release-mismatch로 깨졌다. 16-02가
tests/runtime-schema에 한 것처럼 설치된 집합에서 만든다.
- 버린 대안: 참조 기능 복사+토큰 치환(D1에 어긋나고 전역 ID를 놓친다),
topic을 뼈대에서 빼기(실제 기능이 같은 문제를 다시 만난다), 생성
테스트가 tests/mocks의 bootstrap·server를 쓰기(부팅 문서는 테스트 안의
fetcher가 주고, MSW는 setupServer와 http-scenarios만 쓴다).
위험·한계
- 생성기 파일이 1,408줄이다. 대부분 템플릿 문자열이다.
- context-module.ts는 생성기가 글로 읽는 선언이라 실행되지 않는다(참조
context와 같다). 나머지 생성 모듈은 생성된 테스트가 모두 실행한다
(함수 100%, 문장 100%, 페이지 분기 1개 미실행).
- --context reference-context로 참조 context에 넣으면 참조 기능의
installed-context-routing 테스트(라우트 4개 정확히 일치)가 깨진다.
드릴은 새 context를 쓴다.
- test:feature-scaffold, test:sample-removal, check:architecture는
pnpm이 필요해 worktree에서 돌리지 않았다.
- tests/unit/feature-shape-growth.test.ts는 기준 커밋에서도 1 KiB를 넘어
실패한다(이번 측정 1035·1068). 기능이 하나 더 있으면 통과한다.
검증
- RED: 생성한 기능을 넣고 돌리면 tests/release 7건 실패("expected
{ state: 'release-mismatch' } to match { state: 'booted' }"),
ci-workflow-generation 1건 실패(98 vs 99). 접두어 테스트는 템플릿의
스키마 ID를 "NoRequest"로 바꾼 변이에서 실패한다.
- GREEN(worktree에 order-feature 생성): tsc app·test·node rc=0, 전체
eslint rc=0, check-registries "11 registries PASS; compatibility=
additive"(기준선 재승인 없음), verify-documentation-readiness
PASS_SCOPED, check-i18n PASS, check-design-system·check-diagnostics·
check-adapter-inventory PASS, check-ci-contract·workflow·artifact
schema PASS, 생성 테스트 7/7, run-vitest tests/unit·component·features
238파일 통과, integration·contract·runtime-schema·platform·architecture·
release·scripts 59파일 통과(pnpm을 띄우는 2파일 제외).
- --context reference-context와 --package 변형도 tsc·registries·생성
테스트 통과. 참조 기능을 지운 복사본에서 생성 → tsc app·test, i18n,
생성 테스트·release·router 테스트 통과(결정 4 모의).
- 생성물을 지운 뒤 같은 검사 통과(feature-shape-growth 기존 실패 1건
제외), git status 깨끗.
Clean Architecture Frontend Template
A React/Vite reference implementation where architecture boundaries, integration behavior, release coherence, accessibility, performance, and operations are executable contracts rather than conventions.
Start locally
Requirements: the exact Node.js version in .nvmrc (currently 24.14.0) and
Corepack. The repository pins pnpm in package.json.
Product source, tests, build/quality scripts, and supported tool configuration
are TypeScript/TSX. allowJs is disabled. Node-side .ts scripts run directly
on the pinned Node 24 runtime and are checked with NodeNext resolution plus
erasable-syntax enforcement. Project-owned executable source contains no
JavaScript-family files; negative architecture, security, and type-compatibility
fixtures are TypeScript/TSX as well.
corepack pnpm install --frozen-lockfile
corepack pnpm dev
Runtime configuration
Runtime-public settings are validated against one schema before the product
tree mounts (runtimeConfigV2ArtifactSchema in
src/contracts/release-artifacts.ts). Client secrets are forbidden.
The source of truth is config/runtime/<profile>.json, one file per
environment: local, development, staging, production. corepack pnpm build writes dist/config.json from the selected profile
(scripts/generate-runtime-config.ts). public/config.json is only the local
profile for corepack pnpm dev; the build replaces it, so settings put there
never reach a deployment. Keep it equal to config/runtime/local.json plus
BUILD_ID: local-build and RELEASE_ID: local-release;
tests/unit/deployment-admission.test.ts fails when the two differ.
Build and deploy variables, lowest precedence first:
| Variable | Sets | Default |
|---|---|---|
APP_PROFILE |
which config/runtime/<profile>.json is used |
local; an empty value fails the build |
RUNTIME_API_BASE_URL |
API_BASE_URL, overriding the profile; the CI workflow cannot pass it (see below) |
the profile value |
RUNTIME_TELEMETRY_ENDPOINT |
TELEMETRY_ENDPOINT, overriding the profile; the CI workflow cannot pass it (see below) |
the profile value |
VITE_BUILD_ID |
BUILD_ID in the runtime config and the release manifest |
local-build |
RELEASE_ID |
RELEASE_ID in the runtime config and the release manifest |
local-release |
RELEASE_TARGET |
the environment FE-GATE-027 admits the build to; must equal APP_PROFILE |
none; admission refuses without it |
verify:documentation fails if this table stops naming a variable the build or
admission reads (scripts/verify-documentation-readiness.ts).
Only the two RUNTIME_* values can differ from the reviewed profile. Anything
else changes by editing the profile file. Staging and production reject demo
auth, non-HTTPS endpoints and the names reserved for examples and tests
(example.com, example.net, example.org and their subdomains, .example,
.invalid, .test). The shipped staging and production profiles use
*.example.com, so admission refuses them until a project sets its own
endpoints.
In CI the only way to set the endpoints is to commit them to
config/runtime/<profile>.json. The CI contract binds just APP_PROFILE and
RELEASE_TARGET to the build job (scripts/contracts/ci-gates.ts), so a
RUNTIME_* repository variable never reaches the build.
A local production build and its admission check:
APP_PROFILE=production \
RUNTIME_API_BASE_URL=<your-api-origin>/ \
RUNTIME_TELEMETRY_ENDPOINT=<your-telemetry-endpoint> \
VITE_BUILD_ID=<unique build id> RELEASE_ID=<unique release id> \
corepack pnpm build
APP_PROFILE=production RELEASE_TARGET=production corepack pnpm check:release-admission
With CI=true the gate runner (corepack pnpm ci:gate) also requires
VITE_COMMIT_SHA, SOURCE_DATE_EPOCH and CI_RUNNER_IMAGE before it runs a
gate (scripts/lib/build-environment.ts, scripts/run-ci-gate.ts). The CI variable
list is in docs/operations/ci-quality-gates.md.
Included starter experience
The default build mounts a domain-neutral application shell with a header,
responsive sidebar, route focus management, session integration status, a
persistent system / light / dark theme selector, and a language selector.
The route list is ROUTE_REGISTRY (src/features/installed-feature-contracts.ts):
the platform routes of src/contracts/routes.ts plus the routes of every
installed feature, the removable reference feature included. The platform
overview page (/examples/platform) shows the composed list at runtime, so
this README keeps no copy of it and adding a feature does not edit it.
AUTH_MODE=demo is credential-free and accepted only in local/development
environments. Deployments use AUTH_MODE=external and provide the opaque auth
owner described in
docs/architecture/starter-experience.md.
The client route policy is user experience only; server authorization remains
authoritative.
Support scope
Four tiers. The status words on the right are the ones the catalogs and design documents use; the next table maps them.
| Tier | What it covers | Status words |
|---|---|---|
| Default | In the default build and covered by the merge gates: the application shell and example routes, the REST HTTP executor, TanStack Query server state, Local/Session Storage registries, cross-tab invalidation, runtime config profiles and the release manifest check, AUTH_MODE=external (demo only in local/development), the typed message catalog, and the removable reference feature. dist/ is served by a static host (docs/architecture/static-delivery.md) |
COMPOSED |
| Optional (recipe) | Not installed. A project copies one of the recipes in config/recipes/frontend-capability-recipes.json and narrows it (docs/architecture/optional-adapter-recipes.md). realtime, offline-indexeddb, service-worker-pwa and file-transfer also ship a tested reference runtime that the default build leaves out |
RECIPE_AVAILABLE, NOT_INSTALLED, AVAILABLE_NOT_COMPOSED |
| Experimental | Designed and decided, but the runtime is missing or unfinished; finish it before building on it. GraphQL, gRPC-Web, Connect-Web and Protobuf adapters, Range resumable download, IndexedDB query persistence, the local preview decode-safety probe. src/features/local-draft-feature is an architecture sample, not installed |
DESIGNED_NOT_IMPLEMENTED |
| Not supported | Deliberately not selected, or browsers cannot guarantee it: SSR, app-managed background upload and download, directory selection, persistent file handles, product query persistence, exactly-once delivery between tabs | NOT_SELECTED, PLATFORM_LIMITED |
The rows come from
docs/architecture/browser-data-capability-completion-ledger.md,
docs/architecture/client-cache-and-storage.md
and
docs/architecture/api-contract-schema-mapper-and-server-state.md.
| Status word | Where it appears | Meaning | Tier |
|---|---|---|---|
COMPOSED |
capability ledger, design documents | wired into the default production path | Default |
INSTALLED |
a project's own recipe catalog (step 10 of the recipe procedure) | the project added the recipe | Default, for that project |
RECIPE_AVAILABLE |
recipe catalog status |
a recipe exists to copy; nothing is installed | Optional |
NOT_INSTALLED |
recipe catalog defaultStatus; a src/features/<id>/NOT_INSTALLED marker file |
not part of the build | Optional (recipe) or Experimental (feature) |
AVAILABLE_NOT_COMPOSED |
capability ledger; recipe referenceRuntime.status |
code and tests exist; the default build leaves it out | Optional |
DESIGNED_NOT_IMPLEMENTED |
capability ledger, design documents | design approved, runtime missing | Experimental |
NOT_SELECTED |
capability ledger, design documents | deliberately not chosen | Not supported |
PLATFORM_LIMITED |
capability ledger | browsers cannot guarantee it; offered only behind a probe and a fallback, if at all | Not supported as a guarantee |
Gate results (PASS, PASS_SCOPED, UNVERIFIED, FAIL_UNVERIFIED) are
verdicts on evidence, not support tiers.
Browsers: the build targets Chrome and Edge 111, Firefox 128, and Safari and
iOS 16.4. That is the higher of Vite 8's default JavaScript target
(baseline-widely-available; vite.config.ts sets no build.target) and
the CSS targets of Tailwind CSS 4. There is no browserslist. The end-to-end
suite runs on the desktop Chromium, Firefox and WebKit builds that Playwright
1.62 pins, plus one Chromium phone-size smoke (playwright.config.ts). Older
versions inside the target range and real mobile browsers are not tested.
Architecture
This repository is a Frontend Application Foundation: a starter/composition skeleton plus a reusable capability platform. Platform capabilities stay horizontal while product business features use vertical slices.
src/ has nine top-level folders. The descriptions match the table in
docs/architecture/layers.md, which also names every import rule:
src/bootstrap— the composition root: runtime configuration, concrete adapter construction and the React mountsrc/apps— deployable apps: eachapp-module.tsdeclares an app and its context budget;template-app.tsis the app this build producessrc/contexts— bounded contexts: eachcontext-module.tsdeclares its app, route root and feature budgetsrc/features— removable vertical slices (src/features/<id>/{domain,application,contracts,adapters,presentation}) and the installed-feature catalogs (src/features/*.ts)src/presentation— generic UI and the inbound adapter: routes, layouts, the design system, pages and providerssrc/adapters— reusable capability runtimes that implement application ports: HTTP, auth, storage, query cache, telemetry, workers and moresrc/application— generic use cases, ports, policies and view-modelssrc/contracts— shared vocabulary and registries read by several layers, the workers and the build and release scriptssrc/platform— product-neutral primitives any folder may use: budgets, execution context, resilience, the telemetry pipeline, error envelopes and release coherence
Dependencies point inward. Every folder may also import contracts and
platform:
presentation -> application -> contracts -> platform
adapters -----^
bootstrap composes concrete adapters
apps -> contexts -> features (an app deploys contexts; a context owns features)
feature use case -> feature port <- feature-owned capability binding
Domain code lives inside each feature; there is no top-level domain folder.
See
docs/architecture/frontend-application-foundation.md,
docs/architecture/overview.md, docs/architecture/layers.md, and
docs/architecture/starter-experience.md. The removable vertical slice is
under src/features/reference-feature; its domain, application input, HTTP
binding, contracts, route runtime, and presentation own their contributions.
The central installed catalogs only aggregate selected contributions. The
generic starter routes continue to typecheck, test, and build after that
feature is removed.
Platform capability review
The starter shell is implemented, but the repository review also records the remaining work required before feature teams can use every declared contract through one end-to-end application path:
- platform capability review
- ports, adapters, and feature boundaries
- REST, GraphQL, Connect/gRPC-Web, Schema, Mapper, and Server State
- Protobuf browser transports and REST Gateway
- backend API and Server State handoff contract
- TypeScript, state ownership, and data flow
- routing, page templates, and reusable patterns
- browser data capability completion ledger
- browser file and origin-storage platform
- client cache and storage
- realtime events, Web Push, and bounded polling
- presigned transfer, resumable upload, streaming download, and Image CDN
- server file capability infrastructure
- design-system platform
- frontend platform testing strategy
- implementation roadmap
These documents distinguish repository defaults from opt-in adapters and project-owned integrations. They are target designs and review findings; a capability is not treated as implemented until its branch acceptance criteria and executable gates pass.
Documentation
docs/README.md sorts the documents into current contracts,
target designs and work history.
Files you can delete after copying
These record how the template was built. Nothing in the build or the gates
reads them, except the one file noted below
(tests/unit/deletable-history-documents.test.ts checks this).
| Path | Contents |
|---|---|
docs/superpowers/ |
past plans and specs |
docs/reviews/ |
reviews and the review guide. Keep docs/reviews/adapters/INVENTORY.md: check:adapter-inventory (FE-GATE-010) reads it |
SPEC.md, tasks/ |
requirements and task list of the 2026-09-25 review fix round |
CLAUDE.md |
review instructions for the template repository itself; replace it with your own |
PRODUCT.md |
product context of the template itself (users, purpose, principles) for design tools; replace it with your product's |
The reference feature is not in this list: deleting its directory alone
leaves tests, policy entries and CI scripts behind that fail the gates.
scripts/test-sample-removal.ts removes it from a copy of
the repository and lists everything that has to go with it (its header comment
and SAMPLE_EXTRAS); do the same in your project and run the gates.
Verification
Common local checks:
corepack pnpm lint
corepack pnpm check:types
corepack pnpm check:types:app
corepack pnpm check:types:node
corepack pnpm check:types:test
corepack pnpm check:architecture
corepack pnpm test:all
corepack pnpm test:contract
corepack pnpm test:e2e
corepack pnpm test:a11y
corepack pnpm build
corepack pnpm check:bundle
corepack pnpm test:performance
corepack pnpm verify:compatibility
corepack pnpm verify:release
corepack pnpm check:registries
corepack pnpm drill:runbooks
corepack pnpm check:ci
drill:runbooks stops at the first drill that is not PASS. Without provider
evidence every drill ends UNVERIFIED (exit 3), because a drill never reports
a check it could not run locally as PASS; see "Runbook jobs" in
docs/operations/ci-quality-gates.md.
test:all is the ordinary product-development loop and intentionally excludes
host-level CI-runner assurance. Run corepack pnpm test:system only on the
compatible Linux assurance host described in
docs/testing/taxonomy.md.
check:types는 source, Node scripts/config와 tests를 분리된 TypeScript
project로 모두 검사한다. type/architecture/security/registry의 invalid
fixture는 config/ci/gates.json에서 “실패해야 통과”하는 negative gate로
실행된다. 도구 호환성 결정은
VD-01에 기록돼
있다.
Application feature input은 module augmentation으로 닫힌 ID와 정확한 input
shape를 제공하며, 공통 Result<Value, Failure = AppFailure>는 error registry의
failure kind만 application/presentation 경계를 통과시킨다. Architecture gate는
TypeScript/TSX의 static, dynamic, type import를 별도 정적 그래프로 분석하고
runtime/source 영역의 JavaScript 재유입도 거절한다. 해석되지 않은 import,
parse failure, 금지 계층 edge와 순환 의존은 모두 fail-closed이며 전용
TypeScript/TSX negative fixture로도 검증된다.
Install the pinned Playwright browser engines before the first cross-browser run:
corepack pnpm exec playwright install --with-deps chromium firefox webkit
Two gates intentionally need external evidence:
review:a11y-manual(release gate FE-GATE-028) needs a signed human keyboard/focus/screen-reader review of every registered route, one record per route atartifacts/tests/a11y-manual/<ROUTE_ID>.md. The routes areROUTE_REGISTRY;verify:documentationfails, naming the route ID, when a registered route has no record. The merge gate FE-GATE-009 runs onlyreview:a11y-manual -- --format-only, which checks that every route record keeps the template's fields, reviewed or still pending.collect:web-vitals-evidencestaysFAIL_UNVERIFIEDuntil a reviewed minimum eligible-sample threshold and 28 days of production data exist.
Live hosting verification (FE-GATE-019, production stage) requires
HOSTING_BASE_URL and the promoted release deployed by the workflow's
deployment job. That job is an empty slot until the project fills it
(docs/operations/ci-quality-gates.md);
until then the result is UNVERIFIED, not PASS. A host serving another
release fails.
CI and evidence
The gate registry is config/ci/gates.json; the Gitea workflow is
.gitea/workflows/quality-gates.yml. It follows:
MERGE_READY -> RELEASE_READY -> PROD_PROMOTION_READY -> FIELD_SLO_READY
DOCUMENTATION_READY is independent. No gate is downgraded to a warning.
The workflow runs on pull requests, pushes to main and develop, and v*
tags. The Git host of this repository may not have Actions enabled, so a pull
request can show no gate status at all; no status is not a pass. Until the
host runs the workflow and marks the merge gates as required checks, run the 13
merge gates locally before merging (FE-GATE-008 and 009 need Playwright
browsers):
for gate in 001 002 003 004 005 006 007 008 009 010 011 013 020; do
corepack pnpm ci:gate -- "FE-GATE-$gate" || break
done
Machine-readable evidence is written below artifacts/; generated evidence is
ignored by Git while .gitkeep files preserve the taxonomy.
Operational details are in docs/operations/, with incident procedures in
docs/runbooks/.
Updating a copied project
Template versions are Git tags vX.Y.Z. CHANGELOG.md lists
the changes between tags, marks security fixes [보안] and contract changes
[계약] (backend, deployment, CI or feature code must change too), and names
the affected paths.
Record where you started. Right after copying, commit a one-line
.template-origin file at the root of your project with the template tag (or
commit) you copied and the date, for example v0.2.0 2026-09-26.
Take a template fix with Git. cherry-pick works even when your repository
does not share the template's history, because it merges against the picked
commit's parent:
git remote add template <template repository URL>
git fetch template --tags
git log --oneline <your origin>..template/main # what changed since you copied
git cherry-pick -x <commit> # one fix; -x records its origin
When the files have moved or diverged too far for a clean pick, read the change as a diff and apply it by hand:
git diff <commit>^ <commit> -- <paths from CHANGELOG>
Afterwards run the local merge gates from "CI and evidence", apply the
backend or deployment change a [계약] row names, and update
.template-origin once you have caught up to a tag. git revert undoes a pick.
Defects: if a problem reproduces on an unmodified checkout of your
.template-origin commit, it is a template defect. Report it on the template
repository with that commit and the reproduction; the template maintainer
classifies it and ships the fix with a CHANGELOG entry. A problem that needs
your changes to reproduce belongs to your project, and applying a template fix
to your copy is your project's job.