문제: 폭 48rem 미만(휴대폰, 1280px 창의 약 170% 이상 확대)에서
responsive.css가 머리글의 색상 테마 선택, 세션 상태, 브랜드를
display: none으로 숨긴다. 메뉴 서랍에는 주요 탐색만 있어서 이 기능과
정보를 쓸 곳이 없다. WCAG 2.2 1.4.10(Reflow)의 "기능·정보 손실 없이"
조건을 어긴다.
고른 방법: 머리글은 지금처럼 두고, 서랍에 브랜드 이름(탐색 위)과 색상
테마 선택·세션 상태(탐색 아래)를 넣는다.
- 테마 선택과 세션 상태를 app-shell.tsx 안의 ThemePreferenceSelect,
SessionStatus로 뽑아 머리글과 서랍이 같은 컴포넌트를 쓴다. 둘 다
기존 ThemeProvider·SessionProvider를 직접 읽어 따로 든 상태가 없다.
- 서랍 쪽 select id는 mobile-theme-preference로 달리 줘서 id가 겹치지
않는다. 머리글 #theme-preference는 그대로다(시각 테스트가 쓴다).
- 서랍 쪽은 라벨을 보이게 두고 theme-selector 클래스를 붙이지 않는다.
그래서 i18n.spec의 "머리글 선택 상자 2개" 검사가 그대로 맞는다.
- 브랜드는 화면을 보고 서랍 위쪽에 링크가 아닌 글자로 넣었다. 서랍에
"홈" 링크가 이미 있어 링크로 두면 같은 곳으로 가는 Tab 정지가 는다.
- 숨김 규칙(responsive.css)과 머리글(app-shell.tsx)에 서랍이 대신
보여 준다는 주석을 달았다.
버린 대안:
- 머리글에 테마 아이콘 메뉴 버튼(리뷰 5.3 (C)): 새 컴포넌트가 필요하고
320px 머리글 공간을 다툰다. 머리글은 단순하게 두기로 정했다.
- 서랍이 열릴 때만 서랍 쪽 컨트롤을 렌더: DOM 중복은 없어지지만 탐색은
항상, 나머지는 조건부로 그리는 이유가 코드에 드러나지 않는다. 탐색이
이미 사이드바와 서랍에 두 벌 있는 방식에 맞췄다.
- 서랍 제목을 앱 이름으로 바꾸기: 대화상자 이름 "메뉴"가 바뀌어 기존
접근성 이름과 테스트가 깨진다.
위험·한계:
- 세션 상태 문구와 테마 select가 DOM에 두 벌 있다. 접근성 트리에는
한 번만 나온다(좁은 폭은 머리글 쪽이 display: none, 넓은 폭은 닫힌
dialog). 다만 페이지 전체에서 getByText로 셸 문구를 찾는 테스트는
strict mode에 걸린다. reference-route.spec의 "인증됨"을 banner로
좁혔다. 다운스트림 테스트도 같은 수정이 필요할 수 있다.
- 640x400(200% 확대)에서는 테마 선택이 서랍 첫 화면 아래에 있어 서랍을
스크롤해야 보인다.
- 좁은 화면 서랍 화면이 바뀐다. 시각 골든
app-shell-compact-pseudo-drawer.png는 이 커밋에서 갱신하지 않았다.
- 초기 JS gzip 203,572 -> 203,648 B(+76 B, 예산 204,800 B). check:bundle은
pnpm을 불러 돌리지 않았고, 같은 분류(classifyViteJavascript)와
gzipSync로 직접 쟀다.
- 실제 기기 터치, 스크린 리더 발표는 확인하지 않았다.
검증:
- RED: tests/e2e/responsive.spec.ts 새 테스트(320·375·640px)가 수정 전
chromium·firefox·webkit 9/9 실패. getByRole('dialog', { name: '메뉴' })
.getByRole('combobox', { name: '색상 테마' }): element(s) not found.
- GREEN: 같은 테스트 9/9 통과. 마지막 탐색 링크에서 Tab으로 테마 선택에
닿고, dark·light 선택에 html[data-theme]이 바뀐다. 서랍에 "로그인 전"과
브랜드가 보인다.
- 회귀 e2e: responsive·i18n·theme·accessibility·app-shell·reference-route
(세 엔진) + compact-smoke(chromium-compact) 85/85 통과. app-shell.spec의
Esc 닫기·포커스 복원·서랍 링크 뒤 h1 포커스 포함. 수정 전에는
reference-route가 세 엔진에서 strict mode로 실패하는 것을 확인했다.
- 열린 서랍 axe(375px, light·dark, 세 엔진) 위반 0(일회성, 커밋 안 함).
- node scripts/run-vitest.ts run tests/component: 211/211 통과.
- tsc(app·test·node) 0, eslint(바꾼 tsx·spec) 0, check-design-system
PASS, check-architecture(pnpm 대신 exec 전용 shim) PASS.
- Playwright는 webServer만 `npx vite preview`로 바꾼 임시 설정으로
돌렸다(빌드는 node scripts/build-frontend.ts).
Refs: docs/reviews/2026-11-01-maturity-review/08-presentation.md 08-01
Clean Architecture Frontend Template
A React/Vite reference implementation where architecture boundaries, integration behavior, release coherence, accessibility, performance, and operations are executable contracts rather than conventions.
Start locally
Requirements: the exact Node.js version in .nvmrc (currently 24.14.0) and
Corepack. The repository pins pnpm in package.json.
Product source, tests, build/quality scripts, and supported tool configuration
are TypeScript/TSX. allowJs is disabled. Node-side .ts scripts run directly
on the pinned Node 24 runtime and are checked with NodeNext resolution plus
erasable-syntax enforcement. Project-owned executable source contains no
JavaScript-family files; negative architecture, security, and type-compatibility
fixtures are TypeScript/TSX as well.
corepack pnpm install --frozen-lockfile
corepack pnpm dev
Runtime configuration
Runtime-public settings are validated against one schema before the product
tree mounts (runtimeConfigV2ArtifactSchema in
src/contracts/release-artifacts.ts). Client secrets are forbidden.
The source of truth is config/runtime/<profile>.json, one file per
environment: local, development, staging, production. corepack pnpm build writes dist/config.json from the selected profile
(scripts/generate-runtime-config.ts). public/config.json is only the local
profile for corepack pnpm dev; the build replaces it, so settings put there
never reach a deployment. Keep it equal to config/runtime/local.json plus
BUILD_ID: local-build and RELEASE_ID: local-release;
tests/unit/deployment-admission.test.ts fails when the two differ.
Build and deploy variables, lowest precedence first:
| Variable | Sets | Default |
|---|---|---|
APP_PROFILE |
which config/runtime/<profile>.json is used |
local; an empty value fails the build |
RUNTIME_API_BASE_URL |
API_BASE_URL, overriding the profile |
the profile value |
RUNTIME_TELEMETRY_ENDPOINT |
TELEMETRY_ENDPOINT, overriding the profile |
the profile value |
VITE_BUILD_ID |
BUILD_ID in the runtime config and the release manifest |
local-build |
RELEASE_ID |
RELEASE_ID in the runtime config and the release manifest |
local-release |
RELEASE_TARGET |
the environment FE-GATE-027 admits the build to; must equal APP_PROFILE |
none; admission refuses without it |
verify:documentation fails if this table stops naming a variable the build or
admission reads (scripts/verify-documentation-readiness.ts).
Only the two RUNTIME_* values can differ from the reviewed profile. Anything
else changes by editing the profile file. Staging and production reject demo
auth and non-HTTPS endpoints.
A production build and its admission check:
APP_PROFILE=production \
RUNTIME_API_BASE_URL=https://api.example.com/ \
RUNTIME_TELEMETRY_ENDPOINT=https://telemetry.example.com/v1/events \
VITE_BUILD_ID=<unique build id> RELEASE_ID=<unique release id> \
corepack pnpm build
APP_PROFILE=production RELEASE_TARGET=production corepack pnpm check:release-admission
With CI=true the gate runner (corepack pnpm ci:gate) also requires
VITE_COMMIT_SHA, SOURCE_DATE_EPOCH and CI_RUNNER_IMAGE before it runs a
gate (scripts/lib/build-environment.ts, scripts/run-ci-gate.ts). The CI variable
list is in docs/operations/ci-quality-gates.md.
Included starter experience
The default build mounts a domain-neutral application shell with a header,
responsive sidebar, route focus management, session integration status, and a
persistent system / light / dark theme selector.
| Route | Purpose |
|---|---|
/ |
implementation readiness and starter links |
/examples/ui |
buttons, fields, cards, alerts, badges, modal, and tokens |
/examples/states |
loading, refresh, empty, error, auth, forbidden, and not-found states |
/examples/auth |
reactive external-auth integration seam |
/examples/reference-resources |
removable, session-required reference feature |
AUTH_MODE=demo is credential-free and accepted only in local/development
environments. Deployments use AUTH_MODE=external and provide the opaque auth
owner described in
docs/architecture/starter-experience.md.
The client route policy is user experience only; server authorization remains
authoritative.
Support scope
Four tiers. The status words on the right are the ones the catalogs and design documents use; the next table maps them.
| Tier | What it covers | Status words |
|---|---|---|
| Default | In the default build and covered by the merge gates: the application shell and example routes, the REST HTTP executor, TanStack Query server state, Local/Session Storage registries, cross-tab invalidation, runtime config profiles and the release manifest check, AUTH_MODE=external (demo only in local/development), the typed message catalog, and the removable reference feature. dist/ is served by a static host (docs/architecture/static-delivery.md) |
COMPOSED |
| Optional (recipe) | Not installed. A project copies one of the recipes in config/recipes/frontend-capability-recipes.json and narrows it (docs/architecture/optional-adapter-recipes.md). realtime, offline-indexeddb, service-worker-pwa and file-transfer also ship a tested reference runtime that the default build leaves out |
RECIPE_AVAILABLE, NOT_INSTALLED, AVAILABLE_NOT_COMPOSED |
| Experimental | Designed and decided, but the runtime is missing or unfinished; finish it before building on it. GraphQL, gRPC-Web, Connect-Web and Protobuf adapters, Range resumable download, IndexedDB query persistence, the local preview decode-safety probe. src/features/local-draft-feature is an architecture sample, not installed |
DESIGNED_NOT_IMPLEMENTED |
| Not supported | Deliberately not selected, or browsers cannot guarantee it: SSR, app-managed background upload and download, directory selection, persistent file handles, product query persistence, exactly-once delivery between tabs | NOT_SELECTED, PLATFORM_LIMITED |
The rows come from
docs/architecture/browser-data-capability-completion-ledger.md,
docs/architecture/client-cache-and-storage.md
and
docs/architecture/api-contract-schema-mapper-and-server-state.md.
| Status word | Where it appears | Meaning | Tier |
|---|---|---|---|
COMPOSED |
capability ledger, design documents | wired into the default production path | Default |
INSTALLED |
a project's own recipe catalog (step 10 of the recipe procedure) | the project added the recipe | Default, for that project |
RECIPE_AVAILABLE |
recipe catalog status |
a recipe exists to copy; nothing is installed | Optional |
NOT_INSTALLED |
recipe catalog defaultStatus; a src/features/<id>/NOT_INSTALLED marker file |
not part of the build | Optional (recipe) or Experimental (feature) |
AVAILABLE_NOT_COMPOSED |
capability ledger; recipe referenceRuntime.status |
code and tests exist; the default build leaves it out | Optional |
DESIGNED_NOT_IMPLEMENTED |
capability ledger, design documents | design approved, runtime missing | Experimental |
NOT_SELECTED |
capability ledger, design documents | deliberately not chosen | Not supported |
PLATFORM_LIMITED |
capability ledger | browsers cannot guarantee it; offered only behind a probe and a fallback, if at all | Not supported as a guarantee |
Gate results (PASS, PASS_SCOPED, UNVERIFIED, FAIL_UNVERIFIED) are
verdicts on evidence, not support tiers.
Browsers: the build targets Chrome and Edge 111, Firefox 128, and Safari and
iOS 16.4. That is the higher of Vite 8's default JavaScript target
(baseline-widely-available; vite.config.ts sets no build.target) and
the CSS targets of Tailwind CSS 4. There is no browserslist. The end-to-end
suite runs on the desktop Chromium, Firefox and WebKit builds that Playwright
1.62 pins, plus one Chromium phone-size smoke (playwright.config.ts). Older
versions inside the target range and real mobile browsers are not tested.
Architecture
This repository is a Frontend Application Foundation: a starter/composition skeleton plus a reusable capability platform. Platform capabilities stay horizontal while product business features use vertical slices.
Dependencies point inward:
presentation -> application -> domain
adapters -----^
bootstrap composes concrete adapters
feature use case -> feature port <- feature-owned capability binding
See
docs/architecture/frontend-application-foundation.md,
docs/architecture/overview.md, docs/architecture/layers.md, and
docs/architecture/starter-experience.md. The removable vertical slice is
under src/features/reference-feature; its domain, application input, HTTP
binding, contracts, route runtime, and presentation own their contributions.
The central installed catalogs only aggregate selected contributions. The
generic starter routes continue to typecheck, test, and build after that
feature is removed.
Platform capability review
The starter shell is implemented, but the repository review also records the remaining work required before feature teams can use every declared contract through one end-to-end application path:
- platform capability review
- ports, adapters, and feature boundaries
- REST, GraphQL, Connect/gRPC-Web, Schema, Mapper, and Server State
- Protobuf browser transports and REST Gateway
- backend API and Server State handoff contract
- TypeScript, state ownership, and data flow
- routing, page templates, and reusable patterns
- browser data capability completion ledger
- browser file and origin-storage platform
- client cache and storage
- realtime events, Web Push, and bounded polling
- presigned transfer, resumable upload, streaming download, and Image CDN
- server file capability infrastructure
- design-system platform
- frontend platform testing strategy
- implementation roadmap
These documents distinguish repository defaults from opt-in adapters and project-owned integrations. They are target designs and review findings; a capability is not treated as implemented until its branch acceptance criteria and executable gates pass.
Documentation
docs/README.md sorts the documents into current contracts,
target designs and work history.
Files you can delete after copying
These record how the template was built. Nothing in the build or the gates
reads them, except the one file noted below
(tests/unit/deletable-history-documents.test.ts checks this).
| Path | Contents |
|---|---|
docs/superpowers/ |
past plans and specs |
docs/reviews/ |
reviews and the review guide. Keep docs/reviews/adapters/INVENTORY.md: check:adapter-inventory (FE-GATE-010) reads it |
SPEC.md, tasks/ |
requirements and task list of the 2026-09-25 review fix round |
CLAUDE.md |
review instructions for the template repository itself; replace it with your own |
PRODUCT.md |
product context of the template itself (users, purpose, principles) for design tools; replace it with your product's |
The reference feature is not in this list: deleting its directory alone
leaves tests, policy entries and CI scripts behind that fail the gates.
scripts/test-sample-removal.ts removes it from a copy of
the repository and lists everything that has to go with it (its header comment
and SAMPLE_EXTRAS); do the same in your project and run the gates.
Verification
Common local checks:
corepack pnpm lint
corepack pnpm check:types
corepack pnpm check:types:app
corepack pnpm check:types:node
corepack pnpm check:types:test
corepack pnpm check:architecture
corepack pnpm test:all
corepack pnpm test:contract
corepack pnpm test:e2e
corepack pnpm test:a11y
corepack pnpm build
corepack pnpm check:bundle
corepack pnpm test:performance
corepack pnpm verify:compatibility
corepack pnpm verify:release
corepack pnpm check:registries
corepack pnpm drill:runbooks
corepack pnpm check:ci
drill:runbooks stops at the first drill that is not PASS. Without provider
evidence every drill ends UNVERIFIED (exit 3), because a drill never reports
a check it could not run locally as PASS; see "Runbook jobs" in
docs/operations/ci-quality-gates.md.
test:all is the ordinary product-development loop and intentionally excludes
host-level CI-runner assurance. Run corepack pnpm test:system only on the
compatible Linux assurance host described in
docs/testing/taxonomy.md.
check:types는 source, Node scripts/config와 tests를 분리된 TypeScript
project로 모두 검사한다. type/architecture/security/registry의 invalid
fixture는 config/ci/gates.json에서 “실패해야 통과”하는 negative gate로
실행된다. 도구 호환성 결정은
VD-01에 기록돼
있다.
Application feature input은 module augmentation으로 닫힌 ID와 정확한 input
shape를 제공하며, 공통 Result<Value, Failure = AppFailure>는 error registry의
failure kind만 application/presentation 경계를 통과시킨다. Architecture gate는
TypeScript/TSX의 static, dynamic, type import를 별도 정적 그래프로 분석하고
runtime/source 영역의 JavaScript 재유입도 거절한다. 해석되지 않은 import,
parse failure, 금지 계층 edge와 순환 의존은 모두 fail-closed이며 전용
TypeScript/TSX negative fixture로도 검증된다.
Install the pinned Playwright browser engines before the first cross-browser run:
corepack pnpm exec playwright install --with-deps chromium firefox webkit
Two gates intentionally need external evidence:
review:a11y-manual(release gate FE-GATE-028) needs a signed human keyboard/focus/screen-reader review for all ten registered routes:APP_HOME,EXAMPLES_PLATFORM,EXAMPLES_UI,EXAMPLES_STATES,EXAMPLES_AUTH,NOT_FOUND,REFERENCE_RESOURCE_LIST,REFERENCE_RESOURCE_DETAIL,REFERENCE_RESOURCE_FORMandREFERENCE_RESOURCE_STATUS.verify:documentationderives that list from the route registry and fails if this paragraph falls behind it. The merge gate FE-GATE-009 runs onlyreview:a11y-manual -- --format-only, which checks that every route record keeps the template's fields, reviewed or still pending.collect:web-vitals-evidencestaysFAIL_UNVERIFIEDuntil a reviewed minimum eligible-sample threshold and 28 days of production data exist.
Live hosting verification (FE-GATE-019, production stage) requires
HOSTING_BASE_URL and a deployed promoted release; without it the result is
UNVERIFIED, not PASS.
CI and evidence
The gate registry is config/ci/gates.json; the Gitea workflow is
.gitea/workflows/quality-gates.yml. It follows:
MERGE_READY -> RELEASE_READY -> PROD_PROMOTION_READY -> FIELD_SLO_READY
DOCUMENTATION_READY is independent. No gate is downgraded to a warning.
The workflow runs on pull requests, pushes to main and develop, and v*
tags. The Git host of this repository may not have Actions enabled, so a pull
request can show no gate status at all; no status is not a pass. Until the
host runs the workflow and marks the merge gates as required checks, run the 13
merge gates locally before merging (FE-GATE-008 and 009 need Playwright
browsers):
for gate in 001 002 003 004 005 006 007 008 009 010 011 013 020; do
corepack pnpm ci:gate -- "FE-GATE-$gate" || break
done
Machine-readable evidence is written below artifacts/; generated evidence is
ignored by Git while .gitkeep files preserve the taxonomy.
Operational details are in docs/operations/, with incident procedures in
docs/runbooks/.
Updating a copied project
Template versions are Git tags vX.Y.Z. CHANGELOG.md lists
the changes between tags, marks security fixes [보안] and contract changes
[계약] (backend, deployment, CI or feature code must change too), and names
the affected paths.
Record where you started. Right after copying, commit a one-line
.template-origin file at the root of your project with the template tag (or
commit) you copied and the date, for example v0.2.0 2026-09-26.
Take a template fix with Git. cherry-pick works even when your repository
does not share the template's history, because it merges against the picked
commit's parent:
git remote add template <template repository URL>
git fetch template --tags
git log --oneline <your origin>..template/main # what changed since you copied
git cherry-pick -x <commit> # one fix; -x records its origin
When the files have moved or diverged too far for a clean pick, read the change as a diff and apply it by hand:
git diff <commit>^ <commit> -- <paths from CHANGELOG>
Afterwards run the local merge gates from "CI and evidence", apply the
backend or deployment change a [계약] row names, and update
.template-origin once you have caught up to a tag. git revert undoes a pick.
Defects: if a problem reproduces on an unmodified checkout of your
.template-origin commit, it is a template defect. Report it on the template
repository with that commit and the reproduction; the template maintainer
classifies it and ships the fix with a CHANGELOG entry. A problem that needs
your changes to reproduce belongs to your project, and applying a template fix
to your copy is your project's job.