Files
document-haness/docs/clean-architecture-backend-template/tech-log-studio/drift-direction/reference/reference-numbers-in-docs-should-be-derived.md
T
DongHyeonkaandClaude Opus 5 b2963105a8 docs(keycloak-session-store): import the session-storage lab as a new project
The keycloak project ended with four open questions that design could not
settle. A two-VM lab was built to answer them by measurement, and this is
that material: 26 experiments, 125 raw command outputs, 22 browser captures.

Follows the import procedure in README.md.

  source/     the originating repository verbatim — 78 documents, 28 SVGs,
              8 manifests, plus .source-revision recording the commit
  final/      the SSOT
    document.md   729 lines written from the 29 experiment documents, not
                  concatenated: what was predicted, what was measured, and
                  where the measurement itself was wrong
    evidence/raw    125 outputs, flattened to <experiment>__<file> because
                    the originals collided (01-baseline.txt appeared three
                    times) and the audit only globs the top level
    evidence/meta   one per raw file; command and exitCode are null and the
                    README says why rather than inventing them
    evidence/browser  22 captures
    assets/       three diagrams through techviz
    .techviz/     their VizSpecs

A separate project rather than an addition to keycloak: the B-layer answers
that project's four questions, but the A, C and D layers are about cluster
failure, SSO and operations, and one document.md should hold one subject.
The four question records there can point here through 관계.

Recorded rather than papered over: only three of the 28 diagrams were
remade. The repository forbids hand-drawn SVG and forbids titles inside the
canvas; all 28 originals carry both, so converting them is redrawing, not
reformatting. They stay in source/ and the gap is written into the document.

verify-pipeline.py passes. audit-records.py reports no issues.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-09-04 22:51:59 +09:00

2.3 KiB

kind, slug, title, topic, project, status, sourceRevision, rootTreeNode, verifiedOn
kind slug title topic project status sourceRevision rootTreeNode verifiedOn
REFERENCE numbers-in-docs-should-be-derived 문서의 수치는 세지 말고 파생하거나 게이트로 붙든다 drift-direction clean-architecture-backend-template 게시 전 21234e38cdb9a926cbc92bb97a2aee2e4a7d2916 reference:numbers-in-docs-should-be-derived

문서의 수치는 세지 말고 파생하거나 게이트로 붙든다

목적

문서에 손으로 적은 수가 코드보다 뒤처져, 그 수를 근거로 한 서술 전체가 언제 것인지 알 수 없게 되는 것을 막는다.

규칙

  1. 셀 수 있는 것은 세지 말고 파생한다 모듈 수 어댑터 수 규칙 수는 레지스트리나 소스 트리에서 계산할 수 있다.

  2. 파생할 수 없으면 게이트로 붙든다 문서의 수와 실제의 수를 비교하는 검사를 만든다. 검사가 없으면 그 수는 작성 시점의 스냅숏이다.

  3. 같은 수가 여러 문서에 있으면 출처를 하나로 만든다 흩어진 수는 한 번에 갱신되지 않는다.

  4. 수를 근거로 한 서술을 함께 표시한다 그 수가 틀리면 그 서술도 틀린다. 어느 서술이 그 수에 의존하는지 알 수 있어야 한다.

적용 조건

모듈 수 리프 수 규칙 수 지원 버전 수처럼 코드에서 셀 수 있는 모든 수치

지원 매트릭스와 아키텍처 개요 문서

예외

운영상의 가정으로 정한 임계값은 세는 수가 아니다. 그런 값은 출처가 판단이므로 근거를 적는 것으로 충분하다.

예시

여러 문서가 리프 수를 19 로 적고 레지스트리는 62 다. 빌드 설정에 그 수를 검사하는 코드가 없다.

반대 사례로, 오류 코드 태그의 카디널리티 상한은 오류 코드 정의 파일의 행 수와 동기화된다고 상수 주석에 적혀 있다.

관계

  • 여러 문서가 19개 리프라고 적고 레지스트리는 62다 이 규칙을 만든 사례다.
  • 빠뜨림이 통과가 되는 게이트는 게이트가 아니다 두 번째 규칙이 기대는 상위 규칙이다.
  • 과대 진술 문서를 과소보다 먼저 고친다 드리프트가 이미 생겼을 때의 우선순위다.