Files
document-haness/docs/clean-architecture-backend-template/tech-log-studio/multitenancy-isolation/reference/reference-isolation-settings-must-be-transaction-local.md
T
DongHyeonkaandClaude Opus 5 b2963105a8 docs(keycloak-session-store): import the session-storage lab as a new project
The keycloak project ended with four open questions that design could not
settle. A two-VM lab was built to answer them by measurement, and this is
that material: 26 experiments, 125 raw command outputs, 22 browser captures.

Follows the import procedure in README.md.

  source/     the originating repository verbatim — 78 documents, 28 SVGs,
              8 manifests, plus .source-revision recording the commit
  final/      the SSOT
    document.md   729 lines written from the 29 experiment documents, not
                  concatenated: what was predicted, what was measured, and
                  where the measurement itself was wrong
    evidence/raw    125 outputs, flattened to <experiment>__<file> because
                    the originals collided (01-baseline.txt appeared three
                    times) and the audit only globs the top level
    evidence/meta   one per raw file; command and exitCode are null and the
                    README says why rather than inventing them
    evidence/browser  22 captures
    assets/       three diagrams through techviz
    .techviz/     their VizSpecs

A separate project rather than an addition to keycloak: the B-layer answers
that project's four questions, but the A, C and D layers are about cluster
failure, SSO and operations, and one document.md should hold one subject.
The four question records there can point here through 관계.

Recorded rather than papered over: only three of the 28 diagrams were
remade. The repository forbids hand-drawn SVG and forbids titles inside the
canvas; all 28 originals carry both, so converting them is redrawing, not
reformatting. They stay in source/ and the gap is written into the document.

verify-pipeline.py passes. audit-records.py reports no issues.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-09-04 22:51:59 +09:00

63 lines
2.4 KiB
Markdown

---
kind: REFERENCE
slug: isolation-settings-must-be-transaction-local
title: 격리 설정은 트랜잭션 로컬이어야 한다
topic: multitenancy-isolation
project: clean-architecture-backend-template
status: 게시 전
sourceRevision: 21234e38cdb9a926cbc92bb97a2aee2e4a7d2916
rootTreeNode: reference:isolation-settings-must-be-transaction-local
verifiedOn: # 이 기록은 이번 회차에 실행 확인을 하지 않았다
---
# 격리 설정은 트랜잭션 로컬이어야 한다
## 목적
테넌트 바인딩이나 검색 경로처럼 격리를 결정하는 세션 설정이 풀로 돌아간 커넥션에 남아, 다음 차용자가 그것을 상속하는 것을 막는다.
## 규칙
1. 격리를 결정하는 설정은 트랜잭션과 함께 되돌아간다
세션 스코프면 커넥션이 살아 있는 동안 유지된다.
2. 데이터베이스가 제공하는 트랜잭션 로컬 옵션을 쓴다
PostgreSQL 에서는 설정 함수의 세 번째 인자가 그것을 보장한다.
3. 대응물이 없으면 반환 시 명시적으로 되돌린다
중립 값으로 재설정하는 것이 대안이다.
4. 사용 전 덮어쓰기는 값이 항상 설정될 때만 안전하다
한 경로라도 설정 없이 커넥션을 쓰면 앞 사용자의 값이 적용된다.
5. 커넥션이 테넌트에 고정 할당되면 이 문제가 사라진다
다만 그때는 풀 예산이 새 문제가 된다.
## 적용 조건
행 수준 보안의 테넌트 바인딩
테넌트별 스키마 라우팅
세션 상태로 표현되는 모든 격리
## 예외
테넌트별 데이터베이스처럼 커넥션 자체가 격리 경계인 구성. 그 경우 세션 스코프가 문제가 되지 않는다.
## 예시
검색 경로가 세션 설정이라 풀로 돌아간 커넥션이 마지막 테넌트의 스키마를 들고 있다. 다음 차용자는 어떤 문장도 틀리지 않은 채 거기서 읽고 쓴다.
로컬 타임아웃 설정은 매 트랜잭션 전에 다시 적용하는 방식으로 실무상 가려진다. 그 방식은 값이 항상 설정되는 경우에만 안전하다.
## 관계
- **search_path가 풀로 돌아간 커넥션에 남아 다음 tenant가 상속한다**
이 규칙을 만든 사례다.
- **세션 스코프 설정은 풀로 돌아간 커넥션에 남는다**
같은 성질의 일반형이다.
- **RLS가 성립하기 위한 세 전제**
테넌트 바인딩이 이 규칙을 따라야 하는 이유다.