Files
document-haness/docs/clean-architecture-backend-template/tech-log-studio/state-machines-and-ownership/concept/concept-adapter-inbound-graphql-c13.md
T
DongHyeonkaandClaude Opus 5 b2963105a8 docs(keycloak-session-store): import the session-storage lab as a new project
The keycloak project ended with four open questions that design could not
settle. A two-VM lab was built to answer them by measurement, and this is
that material: 26 experiments, 125 raw command outputs, 22 browser captures.

Follows the import procedure in README.md.

  source/     the originating repository verbatim — 78 documents, 28 SVGs,
              8 manifests, plus .source-revision recording the commit
  final/      the SSOT
    document.md   729 lines written from the 29 experiment documents, not
                  concatenated: what was predicted, what was measured, and
                  where the measurement itself was wrong
    evidence/raw    125 outputs, flattened to <experiment>__<file> because
                    the originals collided (01-baseline.txt appeared three
                    times) and the audit only globs the top level
    evidence/meta   one per raw file; command and exitCode are null and the
                    README says why rather than inventing them
    evidence/browser  22 captures
    assets/       three diagrams through techviz
    .techviz/     their VizSpecs

A separate project rather than an addition to keycloak: the B-layer answers
that project's four questions, but the A, C and D layers are about cluster
failure, SSO and operations, and one document.md should hold one subject.
The four question records there can point here through 관계.

Recorded rather than papered over: only three of the 28 diagrams were
remade. The repository forbids hand-drawn SVG and forbids titles inside the
canvas; all 28 originals carry both, so converting them is redrawing, not
reformatting. They stay in source/ and the gap is written into the document.

verify-pipeline.py passes. audit-records.py reports no issues.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-09-04 22:51:59 +09:00

41 lines
1.9 KiB
Markdown

---
kind: CONCEPT
slug: adapter-inbound-graphql-c13
title: 릴리스 게이트의 미배선은 정상이고 작성기의 호출자 부재는 다르다
topic: state-machines-and-ownership
project: clean-architecture-backend-template
status: 게시 전
sourceRevision: 21234e38cdb9a926cbc92bb97a2aee2e4a7d2916
rootTreeNode: concept:adapter-inbound-graphql-c13
evidenceCapturedOn: 2026-09-01
assets:
- key: adapter-inbound-graphql-c13
file: ../../../final/evidence/rendered/adapter-inbound-graphql-c13.svg
evidence:
- ../../../final/evidence/raw/adapter-inbound-graphql-c13.txt
source:
- 원본 분석 절은 analysis/16-adapter-inbound-graphql.md#L873 이다.
module: adapter-inbound-graphql
---
# 릴리스 게이트의 미배선은 정상이고 작성기의 호출자 부재는 다르다
`release` 9개 파일 전부 autoconf=0이다. 릴리스 게이트는 빌드·릴리스 시점 도구이므로 런타임 미배선이 정상이다.
## 본문
<!-- body:start -->
`release` 9개 파일 전부 autoconf=0이다. 릴리스 게이트는 런타임 컴포넌트가 아니라 빌드·릴리스 시점 도구이므로 정상이다.
## GraphQlReleaseReportWriter 참조 위치
:::evidence key="adapter-inbound-graphql-c13" alt="코드베이스에서 GraphQlReleaseReportWriter 를 검색한 출력 4줄. 이 기록이 세는 참조가 그 출력에 그대로 보인다." caption="GraphQlReleaseReportWriter 코드베이스 검색 — 4줄 · exit 0" zoom="true"
:::
## 작성기에 호출자가 없다는 것은 별개 사실이다
`GraphQlReleaseReportWriter`(57)는 main_other=0 · test=1로, 게이트 결과를 기록할 작성기에 호출자가 없다. CLAUDE.md가 그 상태를 명시한다 — "`graphqlPerformanceTest` 레인이 자리를 예약, **증거 없으면 릴리스 게이트가 거부**". 즉 게이트는 CI 레인에서 호출되도록 설계됐다.
<!-- body:end -->