Files
document-haness/docs/clean-architecture-backend-template/tech-log-studio/admission-budget-and-backpressure/concept/concept-messaging-admin-api-c04.md
T
DongHyeonkaandClaude Opus 5 b2963105a8 docs(keycloak-session-store): import the session-storage lab as a new project
The keycloak project ended with four open questions that design could not
settle. A two-VM lab was built to answer them by measurement, and this is
that material: 26 experiments, 125 raw command outputs, 22 browser captures.

Follows the import procedure in README.md.

  source/     the originating repository verbatim — 78 documents, 28 SVGs,
              8 manifests, plus .source-revision recording the commit
  final/      the SSOT
    document.md   729 lines written from the 29 experiment documents, not
                  concatenated: what was predicted, what was measured, and
                  where the measurement itself was wrong
    evidence/raw    125 outputs, flattened to <experiment>__<file> because
                    the originals collided (01-baseline.txt appeared three
                    times) and the audit only globs the top level
    evidence/meta   one per raw file; command and exitCode are null and the
                    README says why rather than inventing them
    evidence/browser  22 captures
    assets/       three diagrams through techviz
    .techviz/     their VizSpecs

A separate project rather than an addition to keycloak: the B-layer answers
that project's four questions, but the A, C and D layers are about cluster
failure, SSO and operations, and one document.md should hold one subject.
The four question records there can point here through 관계.

Recorded rather than papered over: only three of the 28 diagrams were
remade. The repository forbids hand-drawn SVG and forbids titles inside the
canvas; all 28 originals carry both, so converting them is redrawing, not
reformatting. They stay in source/ and the gap is written into the document.

verify-pipeline.py passes. audit-records.py reports no issues.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-09-04 22:51:59 +09:00

45 lines
1.8 KiB
Markdown

---
kind: CONCEPT
slug: messaging-admin-api-c04
title: 실행 경로에서 같은 검사가 세 지점에 겹친다
topic: admission-budget-and-backpressure
project: clean-architecture-backend-template
status: 게시 전
sourceRevision: 21234e38cdb9a926cbc92bb97a2aee2e4a7d2916
rootTreeNode: concept:messaging-admin-api-c04
evidenceCapturedOn: 2026-09-01
assets:
- key: messaging-admin-api-c04
file: ../../../final/evidence/rendered/messaging-admin-api-c04.svg
evidence:
- ../../../final/evidence/raw/messaging-admin-api-c04.txt
source:
- 원본 분석 절은 analysis/messaging/messaging-admin-api.md#L493 이다.
module: messaging-admin-api
---
# 실행 경로에서 같은 검사가 세 지점에 겹친다
계획·승인 발급·실행 세 경로 중 실행 경로에서 검사가 `verify` / `Approved*Plan` 생성자 / guard 세 지점에 걸쳐 겹친다. 방어적 중복이다.
## 본문
<!-- body:start -->
실행 경로가 셋으로 나뉜다.
- **경로 A — 계획** (승인 불필요, dry run 무료)
- **경로 B — 승인 발급** (이 리프 밖, 변경관리 시스템)
- **경로 C — 실행**
## ApprovalVerifier 참조 위치
:::evidence key="messaging-admin-api-c04" alt="코드베이스에서 ApprovalVerifier 를 검색한 출력 29줄. 이 기록이 세는 참조가 그 출력에 그대로 보인다." caption="ApprovalVerifier 코드베이스 검색 — 29줄 · exit 0" zoom="true"
:::
## 실행 경로에서 검사가 겹치는 세 지점
경로 C 에서 검사가 세 지점(`verify` / `Approved*Plan` / guard)에 걸쳐 겹친다. `ApprovalVerifier` javadoc 이 그 이유를 설명한다. 서명 검증이 통과하면 나머지는 이미 보장되지만, `ApprovedReplayPlan` 생성자와 guard 가 같은 것을 다시 본다. 방어적 중복이며 §12.3(a) 에서 다시 다룬다.
<!-- body:end -->