Files
document-haness/docs/clean-architecture-backend-template/tech-log-studio/state-machines-and-ownership/concept/concept-messaging-inbox-jdbc-postgresql-c06.md
T
DongHyeonkaandClaude Opus 5 b2963105a8 docs(keycloak-session-store): import the session-storage lab as a new project
The keycloak project ended with four open questions that design could not
settle. A two-VM lab was built to answer them by measurement, and this is
that material: 26 experiments, 125 raw command outputs, 22 browser captures.

Follows the import procedure in README.md.

  source/     the originating repository verbatim — 78 documents, 28 SVGs,
              8 manifests, plus .source-revision recording the commit
  final/      the SSOT
    document.md   729 lines written from the 29 experiment documents, not
                  concatenated: what was predicted, what was measured, and
                  where the measurement itself was wrong
    evidence/raw    125 outputs, flattened to <experiment>__<file> because
                    the originals collided (01-baseline.txt appeared three
                    times) and the audit only globs the top level
    evidence/meta   one per raw file; command and exitCode are null and the
                    README says why rather than inventing them
    evidence/browser  22 captures
    assets/       three diagrams through techviz
    .techviz/     their VizSpecs

A separate project rather than an addition to keycloak: the B-layer answers
that project's four questions, but the A, C and D layers are about cluster
failure, SSO and operations, and one document.md should hold one subject.
The four question records there can point here through 관계.

Recorded rather than papered over: only three of the 28 diagrams were
remade. The repository forbids hand-drawn SVG and forbids titles inside the
canvas; all 28 originals carry both, so converting them is redrawing, not
reformatting. They stay in source/ and the gap is written into the document.

verify-pipeline.py passes. audit-records.py reports no issues.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-09-04 22:51:59 +09:00

61 lines
2.8 KiB
Markdown

---
kind: CONCEPT
slug: messaging-inbox-jdbc-postgresql-c06
title: 커넥션 조회가 새 커넥션을 열기 전에 검사가 돌아야 한다
topic: state-machines-and-ownership
project: clean-architecture-backend-template
status: 게시 전
sourceRevision: 21234e38cdb9a926cbc92bb97a2aee2e4a7d2916
rootTreeNode: concept:messaging-inbox-jdbc-postgresql-c06
evidenceCapturedOn: 2026-09-01
assets:
- key: messaging-inbox-jdbc-postgresql-c06
file: ../../../final/evidence/rendered/messaging-inbox-jdbc-postgresql-c06.svg
- key: messaging-inbox-jdbc-postgresql-c06-diagram
file: ../../../final/assets/diagrams/messaging-inbox-jdbc-postgresql-c06.svg
evidence:
- ../../../final/evidence/raw/messaging-inbox-jdbc-postgresql-c06.txt
source:
- 원본 분석 절은 analysis/messaging/messaging-inbox-jdbc-postgresql.md#L346 이다.
module: messaging-inbox-jdbc-postgresql
---
# 커넥션 조회가 새 커넥션을 열기 전에 검사가 돌아야 한다
`DataSourceUtils.getConnection`은 활성 트랜잭션에 묶인 커넥션이 있으면 그것을 주고 없으면 새로 연다. 그래서 `requireActiveTransaction`이 먼저 도는 것이 필수다.
## 관계
- **컬럼 폭은 애플리케이션 검증과 짝을 이룬다**
같은 분석 리프에서 끌어낸 규칙이다.
- **같은 안전 규칙은 한 공식과 한 강제 시점을 갖는다**
같은 분석 리프에서 끌어낸 규칙이다.
## 본문
<!-- body:start -->
**이 leaf의 주제 자체가 트랜잭션이다.** `DataSourceUtils.getConnection`은 활성 트랜잭션에 묶인 커넥션이 있으면 그것을 주고, 없으면 새로 연다.
## 커넥션 조회보다 앞선 검사
:::evidence key="messaging-inbox-jdbc-postgresql-c06-diagram" alt="트랜잭션 검사와 커넥션 조회와 INSERT 가 왼쪽에서 오른쪽으로 이어지는 구조" caption="커넥션 조회보다 앞선 검사" zoom="false"
:::
그래서 `requireActiveTransaction`**먼저** 도는 것이 필수다 — 없으면 새 커넥션이 열리고 자동 커밋된다. 그것이 §4.1의 이전 결함이다.
## DataSourceUtils 참조 위치
:::evidence key="messaging-inbox-jdbc-postgresql-c06" alt="코드베이스에서 DataSourceUtils 를 검색한 출력 15줄. 이 기록이 세는 참조가 그 출력에 그대로 보인다." caption="DataSourceUtils 코드베이스 검색 — 15줄 · exit 0" zoom="true"
:::
## 트랜잭션에 참여하지 않는 세 메서드
`isProcessed`와 두 `purge*``dataSource.getConnection()`을 직접 쓴다 — 트랜잭션에 참여하지 않는다. javadoc이 그것을 명시한다("The no-argument overload is provided only for retention sweeps and read-only queries").
## 동시성 원시 요소가 DB에 있다
Java 쪽에 락이나 원자 변수가 없다. 수명주기 참여 없음 — `InboxCleanupJob`을 스케줄링하는 것은 starter다.
<!-- body:end -->