DongHyeonkaandClaude Opus 5
b2963105a8
The keycloak project ended with four open questions that design could not
settle. A two-VM lab was built to answer them by measurement, and this is
that material: 26 experiments, 125 raw command outputs, 22 browser captures.
Follows the import procedure in README.md.
source/ the originating repository verbatim — 78 documents, 28 SVGs,
8 manifests, plus .source-revision recording the commit
final/ the SSOT
document.md 729 lines written from the 29 experiment documents, not
concatenated: what was predicted, what was measured, and
where the measurement itself was wrong
evidence/raw 125 outputs, flattened to <experiment>__<file> because
the originals collided (01-baseline.txt appeared three
times) and the audit only globs the top level
evidence/meta one per raw file; command and exitCode are null and the
README says why rather than inventing them
evidence/browser 22 captures
assets/ three diagrams through techviz
.techviz/ their VizSpecs
A separate project rather than an addition to keycloak: the B-layer answers
that project's four questions, but the A, C and D layers are about cluster
failure, SSO and operations, and one document.md should hold one subject.
The four question records there can point here through 관계.
Recorded rather than papered over: only three of the 28 diagrams were
remade. The repository forbids hand-drawn SVG and forbids titles inside the
canvas; all 28 originals carry both, so converting them is redrawing, not
reformatting. They stay in source/ and the gap is written into the document.
verify-pipeline.py passes. audit-records.py reports no issues.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
45 lines
2.1 KiB
Markdown
45 lines
2.1 KiB
Markdown
---
|
|
kind: CONCEPT
|
|
slug: adapter-outbound-cache-redis-c11
|
|
title: R4인데 BLOCKED이 아닌 정책 파일은 읽히지 않는다
|
|
topic: schema-and-wire-models
|
|
project: clean-architecture-backend-template
|
|
status: 게시 전
|
|
sourceRevision: 21234e38cdb9a926cbc92bb97a2aee2e4a7d2916
|
|
rootTreeNode: concept:adapter-outbound-cache-redis-c11
|
|
evidenceCapturedOn: 2026-09-01
|
|
assets:
|
|
- key: adapter-outbound-cache-redis-c11
|
|
file: ../../../final/evidence/rendered/adapter-outbound-cache-redis-c11.svg
|
|
evidence:
|
|
- ../../../final/evidence/raw/adapter-outbound-cache-redis-c11.txt
|
|
source:
|
|
- 원본 분석 절은 analysis/10-adapter-outbound-cache-redis.md#L579 이다.
|
|
module: adapter-outbound-cache-redis
|
|
---
|
|
|
|
# R4인데 BLOCKED이 아닌 정책 파일은 읽히지 않는다
|
|
|
|
`RedisCommandPolicyLoader`가 일반 YAML 파서를 쓰지 않고, 교차 필드 불변식이 로딩 시점에 적용된다.
|
|
|
|
## 본문
|
|
|
|
<!-- body:start -->
|
|
|
|
`RedisCommandPolicyLoader`의 javadoc이 일반 YAML 파서를 쓰지 않는 이유를 적는다. 파서는 그만큼 좁다 — 탭 금지, 들여쓰기 0/2/4만 허용, `commands:` 루트 정확히 하나, 명령 블록 중복 금지, 필드 이름 allowlist(12종) 밖이면 거부, 빈 값 거부, 필드 중복 거부. test가 `rejectsUnknownFieldsEnumsAndDuplicates`로 잡는다.
|
|
|
|
## RedisCommandPolicyLoader 참조 위치
|
|
|
|
:::evidence key="adapter-outbound-cache-redis-c11" alt="코드베이스에서 RedisCommandPolicyLoader 를 검색한 출력 6줄. 이 기록이 세는 참조가 그 출력에 그대로 보인다." caption="RedisCommandPolicyLoader 코드베이스 검색 — 6줄 · exit 0" zoom="true"
|
|
:::
|
|
|
|
## 모순된 정책 파일은 읽히지 않는다
|
|
|
|
`RedisCommandPolicy`/`RedisCommandDescriptor`의 교차 필드 불변식(§24)이 로딩 시점에 적용되므로, "R4인데 BLOCKED이 아닌" 정책 파일은 **읽히지 않는다**.
|
|
|
|
## 집합을 고정하는 테스트
|
|
|
|
`everyDestructiveCommandIsBlockedAndUnreachable`·`deprecatedCommandNamesAreNotReachable`·`arbitraryScriptSourceExecutionIsBlocked`·`theCatalogFailsClosedForAnUnclassifiedCommand`.
|
|
|
|
<!-- body:end -->
|