Files
document-haness/docs/clean-architecture-backend-template/tech-log-studio/state-ownership-and-concurrency/case/case-messaging-rabbit-f02.md
T
DongHyeonkaandClaude Opus 5 b2963105a8 docs(keycloak-session-store): import the session-storage lab as a new project
The keycloak project ended with four open questions that design could not
settle. A two-VM lab was built to answer them by measurement, and this is
that material: 26 experiments, 125 raw command outputs, 22 browser captures.

Follows the import procedure in README.md.

  source/     the originating repository verbatim — 78 documents, 28 SVGs,
              8 manifests, plus .source-revision recording the commit
  final/      the SSOT
    document.md   729 lines written from the 29 experiment documents, not
                  concatenated: what was predicted, what was measured, and
                  where the measurement itself was wrong
    evidence/raw    125 outputs, flattened to <experiment>__<file> because
                    the originals collided (01-baseline.txt appeared three
                    times) and the audit only globs the top level
    evidence/meta   one per raw file; command and exitCode are null and the
                    README says why rather than inventing them
    evidence/browser  22 captures
    assets/       three diagrams through techviz
    .techviz/     their VizSpecs

A separate project rather than an addition to keycloak: the B-layer answers
that project's four questions, but the A, C and D layers are about cluster
failure, SSO and operations, and one document.md should hold one subject.
The four question records there can point here through 관계.

Recorded rather than papered over: only three of the 28 diagrams were
remade. The repository forbids hand-drawn SVG and forbids titles inside the
canvas; all 28 originals carry both, so converting them is redrawing, not
reformatting. They stay in source/ and the gap is written into the document.

verify-pipeline.py passes. audit-records.py reports no issues.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-09-04 22:51:59 +09:00

4.2 KiB

kind, slug, title, topic, project, status, sourceRevision, rootTreeNode, evidenceCapturedOn, assets, evidence, source, module, priority
kind slug title topic project status sourceRevision rootTreeNode evidenceCapturedOn assets evidence source module priority
CASE messaging-rabbit-f02 반환을 순번에 맞추는 조각이 production 에 없고, 시험이 그 자리를 스스로 메운다 state-ownership-and-concurrency clean-architecture-backend-template 게시 전 21234e38cdb9a926cbc92bb97a2aee2e4a7d2916 case:messaging-rabbit-f02 2026-09-01
key file
messaging-rabbit-f02 ../../../final/evidence/rendered/messaging-rabbit-f02.svg
key file
messaging-rabbit-f02-diagram ../../../final/assets/diagrams/messaging-rabbit-f02.svg
../../../final/evidence/raw/messaging-rabbit-f02.txt
원본 분석 절은 analysis/messaging/messaging-rabbit.md#L238 이다.
messaging-rabbit P2

반환을 순번에 맞추는 조각이 production 에 없고, 시험이 그 자리를 스스로 메운다

이 어댑터의 핵심 보장(§1)은 반환과 확인을 같은 발행 에 묶는 데 달려 있다. 묶는 열쇠는 순번이다.

문제

이 어댑터의 핵심 보장(§1)은 반환과 확인을 같은 발행 에 묶는 데 달려 있다.

묶는 열쇠는 순번이다.

결론

그런데 AMQP 의 basic.return 콜백은 순번을 주지 않는다.

교환기·라우팅 키·속성·본문만 온다.

그래서 발행자가 순번을 메시지에 실어 보내고 반환에서 되읽어야 한다.

RabbitHeaderMapper.toProperties 전문에 그런 헤더가 없다.

쓰는 것은 msg.* 예약 헤더들과 AMQP 의 messageId·correlationId·timestamp·deliveryMode 뿐이다.

그 조각이 존재하는 곳은 시험 하나다.

그 메서드의 javadoc 이 문제를 정확히 서술한다.

"the adapter has to" 인데 어댑터는 하지 않는다.

검증 환경

OpenJDK : 21.0.12 java -version 으로 확인 Gradle : 9.0.0 src/gradle/wrapper/gradle-wrapper.properties 의 distributionUrl 로 확인 확인 방식 : RabbitHeaderMapper 참조 13건 검색과 toProperties 전문에서 순번 헤더 유무 확인 소스 수정 : x

재현 조건

원문은 analysis/messaging/messaging-rabbit.md#L238 에 있다.

본문

이 어댑터의 핵심 보장(§1)은 반환과 확인을 같은 발행 에 묶는 데 달려 있고, 묶는 열쇠는 순번이다. 그런데 AMQP 의 basic.return 콜백은 순번을 주지 않는다 — 교환기·라우팅 키·속성·본문만 온다.

프로덕션에 없는 조각

:::evidence key="messaging-rabbit-f02-diagram" alt="msg 예약 헤더와 AMQP 표준 속성만 헤더 매퍼가 쓰는 것 안에 놓이고 순번 헤더가 바깥에 빗금으로 놓인다" caption="프로덕션에 없는 조각" zoom="false" :::

RabbitHeaderMapper.toProperties 전문에 그런 헤더가 없다. 쓰는 것은 msg.* 예약 헤더들과 AMQP 의 messageId·correlationId·timestamp·deliveryMode 뿐이다.

RabbitHeaderMapper 참조 위치

:::evidence key="messaging-rabbit-f02" alt="코드베이스에서 RabbitHeaderMapper 를 검색한 출력 13줄. 이 기록이 세는 참조가 그 출력에 그대로 보인다." caption="RabbitHeaderMapper 코드베이스 검색 — 13줄 · exit 0" zoom="true" :::

그 조각이 존재하는 곳은 시험 하나다

그 메서드의 javadoc 이 문제를 정확히 서술한다 — "the adapter has to" 인데 어댑터는 하지 않는다. RabbitChannelPublisher 의 javadoc 은 등록 경합(확인이 basicPublish 반환보다 먼저 올 수 있다)만 설명하고 이 상관 문제는 언급하지 않는다.

구현하는 사람이 규약을 다시 발명해야 한다

발명하지 않으면 onReturn 이 호출되지 않아 unroutable 발행이 CONFIRMED 로 보고된다 — 이 어댑터가 존재하는 이유로 든 바로 그 실패다. 수정은 순번 헤더를 RabbitHeaderMapperRabbitPublishMapper 로 올려 production 계약으로 만들고, 그 이름을 RabbitChannelPublisher javadoc 에 적는 것이다.

확인하지 못한 것

실행으로 재현하지 않았다. 매퍼 전문에 순번 헤더가 없다는 것과, 통합 시험이 자기 발행 람다에서 그 헤더를 붙인다는 것으로 판정했다.